Automatic lubricators

Capacity: 60, 125 ml
Pressure: 0 bar - 5 bar

SKF SYSTEM 24 Gas driven single point automatic lubricators The units are supplied ready-to-use straight from the box and filled with a wide range of high performance SKF lubricants. Tool-free activation ...

Capacity: 250, 125 ml
Pressure: 0 bar - 5 bar

SKF SYSTEM 24 Electro-mechanical single point automatic lubricators The SKF TLSD series is the first choice when a simple and reliable automatic lubricator is required ...

Capacity: 125, 250 ml
Pressure: 0 bar - 5 bar

SKF SYSTEM 24 Cabled electro-mechanical single point automatic lubricators For applications that are occasionally in operation Cabled single point automatic lubricators ...

Capacity: 0 ml - 15 ml
Pressure: 0 bar - 5 bar

... height 70 mm) the 15 ml can be installed where other lubricators are too big. The smallest automatic lubricator is the perfect choice for very tight spaces. Once installed, simalube ...

simalube lubricates chains in precise and perfectly measured doses simalube lubricates chains in any industrial environment, efficiently and reliably. Continuous lubrication with simalube prevents premature damage, reduces maintenance ...

Capacity: 15 ml - 250 ml
Pressure: 0 bar - 5 bar

... chains. Once installed, simalube lubricators lubricate evenly, accurately and reliably. This is not at all possible with manual lubrication. Advantages of automatic lubricationwith simalube simalube ...

Pressure: 0 bar - 120 bar

... of the chisel. The SKF Hydraulic Driven Lubricator features a patented internal design that performs well with chisel paste and the prevailing environmental conditions in which hammers operate. The lubricator ...

Capacity: 60, 125, 30 cm³

Klübermatic FLEX is a compact, ready-to-use lubricator. It can be used for diverse applications at temperatures between -20 °C and +60 °C. The lubrication interval can be selected in monthly increments between 1 and 12 ...

Capacity: 125 cm³

... an LC unit (LC = lubricant container) with integrated oil retention valve – filled with 125 cm³ of grease or oil – and a protection cover.

Capacity: 150, 60, 120 cm³

Klübermatic STAR VARIO is fully automatic and works independent of the ambient temperature. It dispenses lubricant with utmost accuracy over 1 to12 months. It consists of an electro-mechanical drive unit with LCD display ...

Capacity: 120 cm³
Pressure: 5 bar

Single point automatic lubricator The MONO point automatic lubricator is the most cost-effective solution alternative to manual lubrication. It ensures that the ...

Capacity: 60, 120, 240 ml
Pressure: 0 bar - 5 bar

... lubrication systems and is a cost-effective solution for users wishing to switch from manual to automatic lubrication and for those familiar with automatic lubrication systems. The function is based ...

Capacity: 60, 250, 150 cm³
Pressure: 7.5 bar

... lubricant dispenser with an electromechanical drive. Its precise delivery system makes Sololube equally suitable for the automatic lubrication of roller and friction bearings, gear racks, open transmissions or chains. Sololube ...

Capacity: 60, 125, 250 ml
Pressure: 0 bar - 30 bar

is an innovative electromechanical lubricator dispenser that only activates itself if the connected sensor registers vibrations. This makes it particularly suitable for intermittent operation. The battery power supply ...

Capacity: 480, 240, 120 cm³
Pressure: 25 bar

... model is battery powered and suitable for use in a variety of applications and environments. The VISIO provides the same automatic, accurate, and reliable lubrication typical with all MEMOLUB® models. However, in addition, ...

Capacity: 120, 240, 480 cm³
Pressure: 25 bar

is an autonomous refillable lubrication system for single or mutiple point use Remote installation up to 10 meters MEMOLUB® HPS is the leading product in our range. Settings of 1 week to 24 months through MEMO rings (see technical data’s). ...

Capacity: 120, 240, 480 cm³
Pressure: 25 bar

is a single or multiple point refillable lubricator which can be installed remotely up to 10 meters External power source 24V Settings from 1 week to 24 months through the MEMO rings (see technical data’s table). With ...

Suitable for fixed systems on mold base or for hammer mold lubrication. Its nozzles are built specifically for nebulization and are combined with a release system that regulates the quantity of release agent used. FEATURES: Suitable ...

The 400 series has been designed to cover the needs of users who do not need mechanical arm movement variations but rather always use the same spraying point for similarly shaped molds. The lubricating head is moved with a pneumatic actuator ...

Capacity: 200 ml
Flow rate: 0.07 m³/s
Pressure: 10 bar

• Reduced weight and size • Double safety lock on bowl • A flexible modular system Port size: - G1/2 Drain type: - None Fog type: - Micro fog Material - Bowl: - Polycarbonate

Capacity: 200 ml
Flow rate: 0.07 m³/s
Pressure: 10 bar

• Reduced weight and size • Double safety lock on bowl • A flexible modular system Port size: - G3/8 Drain type: - None Fog type: - Micro fog Material - Bowl: - Polycarbonate

Capacity: 200 ml
Flow rate: 0.07 m³/s
Pressure: 20 bar

• Reduced weight and size • Double safety lock on bowl • A flexible modular system Port size: - 1/2" PTF Drain type: - None Fog type: - Micro fog Material - Bowl: - Aluminium

... the rolling bearings. CONCEPT1 automatic lubricator The CONCEPT1 is the most cost-effective starter product for automatic relubrication. It is easy to handle, robust, ATEX-certified, ...

Capacity: 250 cm³

CONCEPT2 automatic lubricator This lubricator is suitable for minimum-quantity lubrication with grease or oil. It has two lubricant supply line outlets that can be controlled separately. ...

Capacity: 400 cm³

CONCEPT4 automatic lubricator This lubricator is suitable for minimum-quantity lubrication with grease. It has four lubricant supply line outlets that can be controlled in separate pairs. ...