DN: 1.5 in - 80 in
Pressure: 2.2 MPa
Temperature: -29 °C - 425 °C
... purposes. ATHENA manufactures a wide range of eccentric butterfly valves, including double eccentric butterfly valves and triple offset butterfly valves, ...
Athena Engineering S.r.l.
Pressure: 60 bar
Temperature: 120, 180 °C
... types of butterfly valves in our stocks: Wafer and Lug types. The most important feature that distinguishes these two types of butterfly valves is the way the valves ...
DN: 4, 6, 8, 10, 12 mm
Pressure: 1 MPa
Temperature: 0 °C - 60 °C
... m Outer diameter of pipeline Φ 4 incidents When the rotary knob of the 3-way valve is closed, residual gas is discharged from side A (there is no exhaust port in the valve body, and it is discharged along the knob structure) ...
DN: 224 mm - 800 mm
Pressure: 1.5, 1.7 bar
... The KLB high-tight shut-off damper safely and airtightly shuts off volume flows in round air ducts. The air leakage rate is so low that it can hardly be detected even by a laboratory measurement. The requirements of DIN 1946 Part 4 for airtight dampers ...
DN: 50 mm - 300 mm
Pressure: 10 bar
Temperature: -40 °C - 90 °C
... be installed as an end line valve, bottom discharge valve or tank dump valve The wafer valve can be transformed into a one-way Lug body valve thanks to the set of zinc ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
... Application : Quarter turn valve is used to isolate and regulate the flow of fluid in processing pipelines They are found in the pharmaceutical, biochemical, cosmetic, food processing, beverage, and some dairy markets. Features: Hex ...
DIXON GROUP EUROPE
DN: 64 mm - 218 mm
... technology ab valve, split butterfly valve, Powder containment transfer valve Fast and secure transfer for large quantities Containment transfer Economic solution Supply solution for ...
HANGZHOU GEEVO TECHNOLOGY CO., LTD.
DN: 1.5 in - 5 in
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 80 °C
... The asa butterfly flange with SAE and DIN connections allows the combination with an elastic element (rubber compensator) to make a short compensating and economical connection with the pump port. ...
DN: 80 mm - 3,600 mm
Pressure: 75 psi - 250 psi
Temperature: 143 °C
... Design Features:DeZURIK AWWA Butterfly Valves meet the requirements of AWWA C504 and C516 standards. They are used for shutoff on clean water and gases. Offset disc design, corrosion resistant shaft, stainless steel disc ...
DeZURIK
... Overview Flowseal® High Performance Butterfly Valves are a standard in many industries including heating, ventilating and air conditioning, power generation, hydrocarbon processing, water and waste water treatment, ...
Crane Process Flow Technologies GmbH
DN: 350 mm - 1,600 mm
Pressure: 10, 16 bar
... GREATGOLD - Centric Butterfly Valve Based on 30 years of experience with butterfly valves, BELGICAST presents a completely new and trendsetting design. With increased durability and ...
Belgicast
DN: 100 mm - 250 mm
... Business Type : Manufacturer, Exporter, Supplier, Retailer Material - Metal Application - Gas Fitting, Oil Fitting, Water Fitting Weight - 10-20kg, 20-30kg, 30-40kg Condition - New Finishing - Polished Pressure - High, Low, Medium ...
DN: 0.75 in - 24 in
Temperature: -20 °C - 160 °C
... Ductile cast iron GGG40 body (standard), carbon steel on request DA SA Double Acting or Single Acting Standard temperature range (comprising actuator) -20° / +80° ...
MAROS Engineering
DN: 200 mm - 1,800 mm
Pressure: 16 bar - 31 bar
Temperature: -10 °C - 50 °C
... RAPHAEL’s new double eccentric butterfly valve represents the essence of an efficient butterfly valve designed for when economy is a high priority. BTF-E is functional and reliable, ...
DN: 50 mm - 300 mm
... SYLAX® WAFER STYLE SERIES 149GA Body: Cast Iron Disc: 316 Stainless Steel Seat Liner: EPDM ...
Flomatic
... Quick open / Quick close with positive locks Positive Viton® O-ring vacuum seal Type 304 stainless steel valve body High conductance Choice of Del-Seal™ CF or Kwik-Flange™ KF ...
DN: 76.1, 88.9, 108 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 100 °C
... AQUApipe stainless steel pipes 304/1.4301 diameters 18mm to 108mm are compatible with other fittings 18mm to 108mm in material 304/1.4301, 316/1.4401 or 316L/1.4404. AQUApipe press fittings 304/1.4301 diameters 18mm to 108mm are compatible with DVGW ...
Airpipe Europe
DN: 50 mm - 2,000 mm
Pressure: 16 bar
Temperature: -40 °C - 205 °C
... • Valve plate material: Ductile iron nylon coated, Ductile iron-zinc plated, AI bronze • Construction ISO5752 AP1609 GB12221 • Design standard:GB12238 • Inspection standard: 1) Density 1.1xPN 2) Body bearing pressure:1.5xPN • ...
ROPO GmbH
DN: 65 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C
... High performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation ...
Effast
DN: 2,500 mm
Temperature: 600 °C
... Regulating or isolating round butterfly damper. Normally with one single disc on a central shaft and optionally with multiple interconnected blades. Available with pneumatic, electric, hydraulic or manual actuator. Depending ...
ORBINOX
DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C
... -7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves Co., Ltd. ...
Value Valves Co., Ltd.
DN: 25.4 mm - 101.6 mm
Pressure: 0 bar - 0 bar
Temperature: 20 °C
... Pneumatic butterfly valve Size:1"-4" Clamp-type pneumatic butterfly valve criteria: DIN, SMS, ISO, 3A, IDF, RJT Clamp-type pneumatic butterfly valve ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 50 mm - 200 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... Working position: Any Features •high tightness •seat materials EPDM/NBR •central disc bearing •environment-friendly •easy to install ...
ZETKAMA Sp. z o.o.
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... -pneumatically controlled quick-closing butterfly flap valve sets standards for tightness, service life and reliability even in the most demanding applications. The butterfly flap valve ...
Kühme Armaturen GmbH
... The Stanelle Butterfly Valves: simple, rugged components for a wide variety of application conditions. Everywhere where flexible connection is required. A rubber or a cloth collar (or the like) carries over the connection ...
... wafer flanged butterfly valve PVDF, PPH, UPVC or CPVC from 2'' to 6'' EPDM or FKM seals PN10 ...
SAFI
DN: 2 in - 24 in
Pressure: 150, 230 psi
... every detail in the manufacture of its valves, using materials of the highest quality, always complying with the standards for hydraulically operated devices. DURABILITY: The quality of the Gaer® butterfly valve ...
Pressure: 0 bar - 315 bar
... The Type MG throttle valve is used to regulate and control flow of fluid within the system, depending on the condition of the pressure and viscosity level. It can be integrated within a hydraulic system which requires stable working endurance ...
DN: 50 mm - 1,200 mm
Pressure: 20 bar - 50 bar
Temperature: -15 °C - 180 °C
... Centerline Butterfly Valve Product type Switch Valve Product description Centerline Butterfly Valve Model D41X/F Size NPS 2”～48”(DN50～DN1200) Operating ...
Beijing Valve General Factory Co., Ltd
... . AFC Monel valves serve many different applications in these industries: • Chemical • Oil & Gas • Pharmaceutical • Nuclear Power • Marine • Petrochemical • Oil Refining • Sea Water Characteristics 1. AFC butterfly ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 50 mm - 400 mm
Pressure: 240 psi
... BUTTERFLY VALVE Technical characteristics: Wafer type, for mounting between two counter flanges Working pressure PN16 Flanges drilled acc. PN10/16 Gearbox operating available Mounting flange: ISO5211 Body: ...
DN: 4 in
... The Liquip LBV450VGL Butterfly Valve has a lightweight and durable design that enables it to provide and control full flow through pipelines fitted with 100-mm (4”) Tank Truck Manufacturers Association (TTMA) flanges. Features ...
DN: 75 mm - 1,250 mm
... Tender specification PVC HOKA PVC butterfly valve with hand lever with flange plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. as butterfly valve ...
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -35 °C - 130 °C
... BUTTERFLY VALVE WAFER TYPE EPDM SEAT The KTN 266IE is an economical and quality product, manufactured in accordance with strict European regulations. Its design allows the opening or closing of the fluid by turning ...
KTN
DN: 100 mm - 3,500 mm
Pressure: 10 bar - 50 bar
Valves for maintenance or safety purposes, they are engineered and customized to the special needs of hydroelectric power plants. Used as isolation device, they provide tight shut-off when closed and little pressure loss when open. Relatively ...
DN: 50 mm - 200 mm
Pressure: 10 bar
... BUTTERFLY VALVES AISI 316 BODY, DISC AND SHAFT,FLANGES PN10 AND ANSI 150 Butterfly valves type Wafer : - AISI316 body, disc and shaft - PTFE body seat over EPDM backseat - Assembly ...
TUNING Fluid Solutions SARL
DN: 25 mm - 100 mm
... Valves by Velo Acciai include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Technical features Sizes of ball ...
DN: 250 mm - 1,000 mm
... Use : For general applications, fluids, gas and water treatment. Body shape : Double flanged Type : 2314 Tightness: Elastomer (EPDM/NBR/VITON/HYPALON/NEOPRENE/SILICONE) Face to Face : EN 558-1/20 Max working pressure : According to configurations Type ...
DN: 20 mm - 354 mm
... A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which ...
Highlight Technology Corp.
6 expert tips
Prioritize triple-offset designs for high-pressure steam applications to eliminate seat wear and ensure long-term bubble-tight sealing performance.
Conduct a comprehensive financial review including maintenance frequency rather than focusing solely on the initial procurement price.
Select hardware with ISO five-two-one-one pads to simplify actuator replacement and ensure global component compatibility.
Utilize lug body designs instead of wafer types when downstream piping requires removal while the system remains pressurized.
Always verify the technical certification to ensure compliance with local building safety standards and long-term durability.
DN: 100 mm - 400 mm
... Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive. ...
SCUTTI
the best suppliers