Calibrators

... Traceable Supplied with calibration certificate Kit Supplied in a plastic carry case Export Available world wide Calibration Kit Specification (Part no A-845213): Calibration gas: 100 ppm Isobutylene in synthetic air balance (103L) Regulator 600mm ...

Temperature: 20 °C - 30 °C

Transcom Electronic Calibration Modules (TECM) are ideal for users who want fast and easy calibration of various VNAs. (Refer to 1.2 Vector Network Analyzer Compatibility). This TECMs are powered up via USB or 5.5 DC connector and communicate with VNA ...

... The SS7012 Signal Calibrator is designed to generate and measure signals at the same time. This device operates with enhanced stability and decreased calibration costs than the old HIOKI model. It is suitable for loop evaluation and instrumentation ...

Calibration box CS-5 kV, due to high-quality resistors, with very high accuracy class, perfectly suited to verify the indications of insulation resistance meter and is very good tool for training purposes. CS-5 kV may be used as a simulator of the insulation ...

... This is a handy type calibrator that is highly portable. Leak standard can be generated simply by adjusting the dial. By changing the laminar. · Adjustable inlet pressure · This calibrator is compatible with a maximum ...

Temperature: -196 °C - 420 °C
Voltage: 9 V

... Ellab Temperature Standard ETS10 The traceable ETS allows for extremely accurate temperature measurements by converting resistance into temperature using its built-in algorithms. When connected to the ValSuite software, the LiquiCal bath and ETS ...

... Portable Audiometer Calibration System Model AudCal for Certification and Testing The new SoundAdvisor Audiometer Calibration System AudCal is a field-ready solution for fast, comprehensive audiometer calibration. ...

The Uni 500 is the ideal testing tool for process development or when you begin to plan a series test – its maximum configuration masters the pressure decay/pressure rise, relative pressure/differential pressure and mass flow methods equally well, providing ...

Temperature: 5 °C - 430 °C
Voltage: 110, 120, 220, 240 V

... UCal 400+ Portable Dri-Block Calibrator - Wide temperature range - Built in program for thermal switch testing - Maximum temperature of 430°C/806°F - Fast heat up and cool down - 10 insert formats available - Independent over-temperature ...

Noise level: 94, 114 dB

... ER CALIBRATOR Sound level meter calibrator – SAND9+ The sound level meter calibrator is employed to calibrate and/ or check sound level meters. Users can choose 2 different class I acoustic signals, ...

Temperature: 0 °C - 50 °C

... Partial discharge calibrator KAL 9511 is a successor to the popular Tettex 9216. KAL 9511 covers a wide range of applications.  It is compact, easy to use and has the same long battery operation capability of Tettex 9216 but offers ...

Voltage: 60 V - 400 V

... 0.02 class energy meter calibration device instrument 　　Facing as many as dozens of single/three phase device in measurement checking center and Production Company, it is a challenge work to check and test to the device according to IEC 60736. While ...

Temperature: 5 °C - 40 °C
Pressure: 20 psi - 40 psi
Voltage: 85 V - 265 V

... The Model T700U is a microprocessor based calibrator for precision, trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint ...

Noise level: 94 dB

... The SC-2120A is a simplified sound calibrator for use in operational checking of acoustic measurement systems. * Accomodates 1/2 inch microphones. * Long battery life (up to 20 hours of continuous operation). Applicable ...

... SDX/SHJ Dynamometer and echometer calibration equipment Application Area SDX/SHJ Dynamometer and echometer calibration equipment is mainly used for the calibration of various dynamometers used in oilfield. It can ...

Temperature: -35 °C - 165 °C
Voltage: 110 V - 240 V

... Whether for on-site use in the workshop, in the measuring and test room or laboratory, SIKA temperature calibrators can be used everywhere. A wide range of industries and various application areas are covered. • assembly, commissioning • ...

The Dytran model 3120B is an accelerometer that is a double ended IEPE reference (comparison). It can be used with unknown acceleration, velocity and displacement sensors in order to measure their sensitivity and frequency response characteristics. It ...

Noise level: 94, 114 dB

... (Class 2) acoustic calibrators produce a standardised 1 kHz tone at 94 dB and 114 dB. 94 dB is typically used to calibrate sound level meters, while 114 dB is typically used to calibrate noise dosimeters, allowing a single calibrator ...

Temperature: 5 °C - 40 °C
Pressure: 1.03 bar
Voltage: 100 V - 240 V

... and battery operated Results directly traceable to NIST Sierra's CalTrak® 500 is an accurate primary standard gas flow calibrator for all inert gases. The 500 is used for calibration and verification of: Mass flow meters ...

Temperature: 50 °C - 680 °C
Voltage: 110 V

Mptest specializes in the manufacturing of fixed-point cells and realization apparatus for temperature standards as defined by the ITS-90. The GD-2680S is a realization apparatus specifically designed for the aluminum freezing point. It features a temperature ...

The TC testing instrument is made of aluminum-titanium alloy and ultra-high-strength alloy materials. It is manual control + digital display output, and can detect torque in both directions. It is widely used in occasions requiring strict pre-tightening ...

Temperature: 5 °C - 40 °C
Voltage: 200 V - 240 V

... Dynamic Calibrator is a multi-channel gas calibration instrument based on Microprocessor Technology and specifically developed for precise gas analyzer. By adopting high precision mass flow controller and standard gas, the calibrator ...

To facilitate installing the Xavitech pumps, we have developed our Flow Calibration Unit (FCU). Connect the pump and the flow with only a few pushes of a button. When that is done, you can place the pump into your system with the desired flow. It cannot ...

Temperature: -10 °C - 70 °C
Pressure: 0 Pa - 100,000 Pa
Voltage: 90 V - 264 V

... for attenuating the display during pressure fluctuations Can be calibrated The portable, battery-operated KAL 84 calibration system combines a pressure transmitter and pressure gauge. These can be used to test and calibrate pressure ...

Temperature: -90 °C - 25 °C
Noise level: 30 dB
Voltage: 100 V - 240 V

... Ultra Cool Dry Block Temperature Calibrator (ED-90X) • Rugged • High Stability • Portability • Ultra Cool Best suited for Calibration &measurement application ofultra cool temperature in Lyophlization ,Vaccine manufacturing Storage ...