- Detection - Measurement >
- Electrical Measurements >
- Current calibrator
Current calibrators
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Pressure: 700 bar
Voltage: 3 V - 30 V
The Additel 762 Automated Pressure Calibrator is unlike any other pressure calibrator on the market. This revolutionary product is a complete turnkey solution for automation of pressure calibration work ...
Additel Corporation
Temperature: -20 °C - 70 °C
Pressure: 4,200 bar
... measure pressure precisely with a built-in pressure sensor, as well as read the current or mV produced by a transducer. It can even supply an excitation voltage to power sensors or transmitters during ...
Additel Corporation
Temperature: -20 °C - 60 °C
Pressure: 700 bar
... in mind when designing our most capable pressure calibrator to date. The ADT762W includes the unique ability to automatically switch between different internal calibrations depending on the current ...
Additel Corporation
Temperature: 0 °C - 50 °C
Voltage: 0 V - 10 V
Multifunction calibrator: 0 ... 10 V, 4 ... 20mA DC napětí/DCV DCA Passive current loop simulation Loop voltage Power supply dvě 1,5 V alkalické ...
Temperature: 0 °C - 50 °C
Multifunction calibrator: 4 ... 20mA DCA Simul. transmitters (absorption current) Loop power supply Power supply dvě 1,5 V alkalické baterie Mechanical ...
Temperature: -10 °C - 50 °C
Multifunction calibrator DC V Ohm RTD TC Power supply Power supply dvě 1,5 V alkalické baterie Current draw cca 60 mA/3 ...
Temperature: -20 °C - 50 °C
Pressure: 700 bar
Voltage: 25 V
The HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The HPC50 pressure calibrator ...
Crystal Engineering
Voltage: 0 V - 45 V
The mAcal Loop Calibrator is an economical and easy-to-use calibration device for sourcing and measuring mA signals. It is designed specifically for 2-wire transmitter loops with 4 to 20 mA signals. The keypad is ...
Crystal Engineering
Temperature: -20 °C - 50 °C
Pressure: 1,000 bar
Voltage: 24 V
... HPC40 Series handheld pressure calibrator is the world's first combined pressure and mA loop calibrator to be fully temperature compensated from -20 to 50°C. You can count on the same accuracy whether ...
Crystal Engineering
Temperature: -200 °C - 2,310 °C
Voltage: 0 V - 600 V
• Source 4’’20mA loop current. • 4»2OmA (1KÇ load, 24V loop supply). • Source: 0’.’lOOmV, 0’4.000V, 0» 12.000V. • Measure: DC mA, mV, V, Q, Frequency (duty cycle), Diode, Continuity and temperature ...
TES Electrical Electronic Corp.
Temperature: -200 °C - 2,310 °C
Voltage: -3 V - 220 V
• Unique mapping function let you calibrate temperature (300 °C) or voltage (220V) directly. • iCal is a multifunction calibrator and an arbitrary function generator. • Source: mA (4 to 2OmA), V (0 to 15V, 0 to 7OmV), ...
TES Electrical Electronic Corp.
Temperature: -200 °C - 2,310 °C
Voltage: -3 V - 24 V
• Source 4»20 mA loop Current • Simulate electronic load (Max. 30V, 2OmA) • Test LED brightness (024mA) • Source 0’.’7OmV and O’15V • Calibrate temperature with selection of 11 types of thermocouples • Source frequency ...
TES Electrical Electronic Corp.
Temperature: -25 °C - 60 °C
Noise level: 50, 120 dB
•Two Calibrators in One! Calibrate all your RTD instruments AND your milliamp loops with the PIE 311Plus. It has all the functions of a 12 type RTD calibrator and can source 0 to 24 milliamps or simulate ...
PIE - Pratical Instrument Electronics, Inc
Temperature: -20 °C - 60 °C
Noise level: 100, 50 dB
Voltage: -500 V - 999 V
First Multifunction calibrator with 5 troubleshooting tools including a universal transmitter: •1 Detect hidden loop problems with Patented Current leak detection technology Quickly diagnose troublesome ...
PIE - Pratical Instrument Electronics, Inc
Voltage: 10 V - 60 V
... other instruments with one unit Calibrator features include: •Value added troubleshooting features of the PIE 830PM Patented diagnostics including Current Leak detection; LOOPSCOPE which indicates ...
PIE - Pratical Instrument Electronics, Inc
Temperature: 18 °C - 28 °C
Voltage: 115, 230 V
... Tester Calibrator helps calibration technicians comply with new regulatory standards up to four times faster than with traditional manual, multiple-product methods.The 5322A replaces the 5320A Electrical Tester Calibrator. The ...
Fluke Calibration
Voltage: 220 V
... function. Direct current or exchange current power supply make it convenient to use. Features ◆ Measure and source voltage, current (active or passive), mV and ...
Huaxin instrument (Beijing) Co., Ltd
Voltage: 28 V
Portable Handheld Loop Calibrator with an Accuracy of ±0.05% capable of measurement & simulation of mA & V signals.
Nagman Instruments & Electronics (P) Ltd.
Temperature: -10 °C - 55 °C
Voltage: 0 V - 30 V
... valve testing loop calibrator. The Fluke 773 mA clampmeter mA clampmeter can measure 4 to mA signals without breaking the loop and has a mA loop and V dc source built in. The Fluke 789 ProcessMeter features ...
Pressure: 0 Pa - 1 Pa
The CA700 Pressure Calibrator is equipped with a silicon resonant sensor that uses Yokogawa proprietary DPharp technology. The CA700 has a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading ...
Temperature: -20 °C - 50 °C
Pressure: 700 bar
Voltage: 25 V
The HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The HPC50 pressure calibrator ...
Ametek STC
Temperature: -20 °C - 50 °C
Pressure: 1,000 bar
Voltage: 24 V
... HPC40 Series handheld pressure calibrator is the world's first combined pressure and mA loop calibrator to be fully temperature compensated from -20 to 50°C. You can count on the same accuracy whether ...
Ametek STC
Temperature: -200 °C - 1,100 °C
Pressure: -1 bar - 1,000 bar
Voltage: 0 V - 30 V
Our Multifunction Process Calibrator combines all your favorite features such as % error calculation, scaling, leak-testing, and switch calibrating into one multifunction process calibrator. • Large ...
Ametek STC
Voltage: 5 V - 10 V
... devices The TRANS CAL 7281 can be fitted with standard or rechargeable batteries for portable use or can run from an external power supply. Combined with a reference sensor the testing device provides a high-precision ...
burster präzisionsmesstechnik gmbh & co kg
Temperature: 5 °C - 45 °C
... with a maximum of 100 steps can be saved and started manually or via the interface. Features: - DC voltage up to ±100.0000 V, ±0.002 % - DC current up to ±50.0000 mA, ±0.005 % ...
burster präzisionsmesstechnik gmbh & co kg
Voltage: 300 mV - 60,000 mV
... the operation of the device easier for the user. For that reason the application possibilities are many: Calibration of current and DC-voltage meters Precise testing of thermocouple temperature measuring instruments Calibration ...
burster präzisionsmesstechnik gmbh & co kg
Voltage: 0 V - 1,000 V
... - 1050 V (± 35 ppm) AC voltage: 1 mV - 1050 V, 15 Hz - 300 kHz (± 250 ppm) DC current: 0 - 20.5 A (± 150 ppm) AC current: 10 uA - 20.5 A, 15 Hz ...
Meatest spol. s r.o.
Voltage: 0 V - 1,050 V
... Specifications: DC voltage: 0 - 1050 V (± 10ppm) AC voltage: 1 mV - 1050 V, 15 Hz - 300 kHz (± 160ppm) DC current: 0 - 30 A (± 100ppm) AC current: ...
Meatest spol. s r.o.
Voltage: 0 V - 1,000 V
... WinQbase. Specifications: DC voltage: 0 - 1000 V (± 60 ppm / year) AC voltage: 1 mV - 1000 V, 20 Hz - 10 kHz (± 500 ppm / year) sinusoidal & non-sinusoidal waveforms DC current: ...
Meatest spol. s r.o.
Voltage: 50 V - 300 V
The MI 2891 Power Simulator is a multi-purpose three phase power simulator for simulating typical situations in low voltage power supply systems. It is an excellent tool for training, ...
Temperature: -10 °C - 50 °C
Pressure: 350 mbar - 1,000,000 mbar
Voltage: 200 mV - 30,000 mV
Druck's DPI610E Pressure calibrator The iconic Druck is back! The latest addition to the DPI600 Series is available now Built on a legacy of excellence When Druck launched the DPI610 series pressure calibrator ...
Temperature: -10 °C - 50 °C
Pressure: 25 mbar - 1,000,000 mbar
Voltage: 4 V
... multifunction calibration tools. Druck multifunction calibrators provide an all-in-one solution for your pressure measurement and generation needs. Our latest DPI 620 Genii multifunction process calibrator ...
Temperature: 0 °C - 50 °C
Voltage: 9 V
... and regulate 4-20 mA from practically any process meter with or without a voltage generator. HI931002 can measure incoming current, provide power, and simulate 4-20 mA output to calibrate your process meter. The communication ...
Temperature: -20 °C - 50 °C
Voltage: 0 V - 24 V
... format. Equipped with a rechargeable lithium-polymer battery, MSC is able to power external devices or sensors and can be used without continuous power supply with the autonomy of up to 20 hours. With ...
Voltage: 0 V - 2 V
Features: * Oyster case with flip-up display is ideal for handheld or benchtop applications * Large 3-1/2 digit LCD display and touch keypad * Display readings in mA or as a % of the 0 to 24mA range or as mV in voltage ranges ...
... Process Calibrator LX229 is ahandheld,battery-operated instrument that measures and sources a variety of electrica lparameters. It can be widely applied in industrial fields and laboratories . The upper display allows ...
Temperature: -250 °C - 1,820 °C
Pressure: 0 bar - 1,000 bar
Voltage: -10 mV - 50,000 mV
... calibrates HART transmitters (HART communicator integrated) and thermistors CALYS 150 field documenting multifunction calibrator is the top instrument of the range. It is the perfect tool for advanced process maintenance ...
AOIP
Temperature: -220 °C - 2,310 °C
Voltage: 100 mV - 50,000 mV
CALYS 50 is a basic multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field and lab measurements, it can simultaneously ...
AOIP
Temperature: -250 °C - 2,310 °C
Pressure: 0 Pa - 1,000 Pa
Voltage: 100 mV - 50,000 mV
CALYS 75 is a field documenting multifunction calibrator of high accuracy within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field and ...
AOIP
Voltage: 0 V - 20 V
The 1044 by Time Electronics is a Voltage and current calibrator which is designed for general purpose current and voltage source. It features its superior performance and basic operation ...
Time Electronics
Voltage: 0 V - 1 V
The 1006 DC Millivolt is ideally designed to provide an excellent quality performance and functionality for very specific purposes. It is a precise, cost-effective type of device which is ideal for several voltage injection ...
Time Electronics
Voltage: 0 V - 1 V
The 1007 DC Millivolt Potentiometer and Calibrator is ideally designed to provide an excellent quality performance and functionality for very specific purposes. It is a precise, cost-effective type of ...
Time Electronics
Voltage: 0 V - 1,000 V
... the world's first ultra-portable full-function calibrator. Transmille have applied their expertise in designing bench and transportable calibrators to create a new generation of multifunction calibrators ...
TRANSMILLE
Voltage: 0 V - 1,000 V
... effective equipment and software are key considerations. The 3000A Series calibrators offer the widest workload coverage of any calibration system presently available. The unique concept of external ...
TRANSMILLE
Voltage: 0 V - 1,000 V
... printer connectivity as standard, supporting a wide range of PCL compatible printers. Reports can be printed directly from the calibrator - ideal for in-situ or on-site applications.
TRANSMILLE
Temperature: 0 °C - 50 °C
Voltage: 0 V - 24 V
Process / Loop calibrator (current 0-24mA / voltage 0-24V) Model 4835 - Current source: 4-20mA, 0-20mA, 0-24mA - Voltage source: 4-20V, 0-20V, 0-24V - Basic accuracy: 0,025% - ...
Pressure: -1 bar - 250 bar
Modular built, automatic Pressure Calibrator ...MEASURE PRESSURE, VERY SIMPLE... TM40_web - Our modular built Pressure-Calibrator TM40 is unique in its conception. The device is built completely ...
... measurement: from 0,1 mΩ up to 500 GΩ DC current: • - generation and measurement: from 1 µA up to 100 A • - for current clamps: up to 1500 A AC current: • ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining