Temperature: 5 °C - 40 °C
Voltage: 100, 150 V
... CVT Calibration System GDHG-103 system is to calibrate CVT, CT/PT in the substation or power plant. System includes 1. AC Resonant Test System, mainly used to inject high voltage to CVT,CT/PT. 2. GDHG-103 CT/PT Calibrator 3. ...
Used during white calibration. Back side of the cover lists calibration data.
... with factory or international standards. To cover the majority of applications, Pfeiffer Vacuum has developed two calibration systems – a basic system and a high-end system. ...
... with factory or international standards. To cover the majority of applications, Pfeiffer Vacuum has developed two calibration systems – a basic system and a high-end system. ...
... • Testing system for multi-channel, piston-operated pipettes • Multi-channel pipette testing (per DIN EN ISO 8655 10.3) takes approximately 10 minutes and saves time • 4, 8 or 12 measurement channels • Conforms to national (ISO17025) and international ...
Temperature: -20 °C - 70 °C
Pressure: 25 mbar - 1,000,000 mbar
... area and 5x hazardous area models to satisfy budget and application requirements from a basic, electrical calibrator to a multifunction calibrator with HART, Profi Bus and Fieldbus. Can be use with pressure modules and ...
... Overview
The CalibrationLine from TRUMPF checks whether the focal position and laser power on the workpiece match configured requirements at regular, individually definable intervals. If necessary, CalibrationLine corrects focus in X, Y and ...
In order to achieve and maintain a consistent product envrionment, constant process parameters are required. For Hot Bar Reflow Soldering, Heat-Seal Bonding, Heat Staking, ACF Laminating and ACF Final Bonding, the most important process parameters are ...
... Radiometers and Thermometers The Universal Calibrator (UC) system is used for calibration of temperature in Q-SUN xenon arc testers and irradiance in QUV accelerated weathering and Q-SUN testers. This system consists of irradiance and ...
Pressure: 0 bar - 2 bar
The MKV 1116 calibration set is intended to be used in conjunction with the SKS 06 (code 231941) or SKS 07 (code 231954) micro-transmitter accessory for calibrating subducts with an ID of 11.4 mm to 16.0 mm. The calibration can be done for single subducts ...
Vetter GmbH Kabelverlegetechnik
... Product overview
Both single ducts and multi-ducts can be calibrated for buried and conduit-protected installations. This calibration unit raises the blow-in capability of mini cables by enabling pre-verification of subduct installation quality.
Compatibility ...
Vetter GmbH Kabelverlegetechnik
Product description: Both single tubes and multi-ducts can be calibrated in buried and in-protection-duct versions. This calibration unit raises the verifiability of mini cable blowability by allowing the quality of subduct installation to be checked ...
Vetter GmbH Kabelverlegetechnik
Noise level: 75 dB
... •2 x 3″ touchscreen •Standard with variable torque and angle •Field calibration •Multi-user level password protection •Life cycle and maintenance counters •Advanced data collection and operator identification •Low noise level at only 75 dB E-RAD ...
The DUT-E ATS automatic calibration station is designed for telematics technicians to calibrate fuel tanks of vehicles and stationary machinery, especially where fuel monitoring is performed using additional accurate fuel level sensors. This station significantly ...
2-in-1 XXL calibration board with the pattern for calibrating front camera systems on VW Group vehicles. The newly reworked version in combination with Q.DAS allows users to also calibrate radar systems on all vehicles that require an even reflective ...
Temperature: 20 °C
... Highly accurate gauge block calibration system • measuring arrangement with two aligned probes • LM 20 laser interferometric probe guarantees high measuring accuracy and linearity • only 15 standard gauge blocks required for the calibration ...
Verification artifacts for machine tool based on metrological technology to offer a quick and reliable solution to the verification of the machine tool
... The portable calibration system Cal.flow enables high-precision flow calibrations according to the reference principle. The Cal.flow calibration system is used in conjunction with the EasyCal PC software to calibrate ...
Voltage: 0 kV - 40 kV
... of application Suitable for tests and inspections for: - Cable extrusions - Calibrations - Cable insulation The Calibrator can also be used for high-voltage tests in sectors such as the oil and gas, energy and offshore industries. ...
... Magnetic Tablet for Dynamic Calibration and Periodical Qualification of Tablet hardness Testing Instruments This instrument represents a tool for calibrating and qualifying the hardness range of Pharma Test and other brand tablet hardness testers. The ...
Temperature: -10 °C - 55 °C
Voltage: 11 V - 18 V
The U.S.A. universal calibration anvil E74 is an indispensable tool for those who perform hammer test surveys: during the execution of these tests it is necessary to check the calibration of the instrument. The U.S.A. anvil E74 is supplied complete with ...
... FDM ITeR - Professional Calibration of an Infrared Thermometer Directly On Site The FDM R&D Team has studied an innovative solution for the scientific research, by releasing a tool capable of bringing together, in a single instrument, safety, speed ...
... Load calibrator is used to measure the standard load value for all kinds of testing instrument, machine, balance, hydraulic system. This instrument is combined wtih a high accuracy load cell and a sensitive digital indicator. It can be ...
... GWB-200JA Calibration instrument for extensometer is a sort of pure mechanical instrument to determine the displacement, deformation, or extension. It has high precision. According to JJG762-92 V.R. of extensometer, it is specially used for the calibration ...
... X-Y laser sensor calibration system for ALPHA system. Connected to the inputs of the ALPHA system, it can automatically center the program along the X and Y axes in relation to the mounted tool. Through the ALPHA SW it is possible to ...
Test and calibration kit: The kit consists of a polypropylene tool bag comprising: two gaseous mixing cans (34 liters at 34 bar) containing calibration gas at a specific concentration, a control valve for Canopy with pressure indicator, a gas detector ...
Pressure: 0 bar - 6 bar
... internal pressure of a tube subjected to the application of a crushing pressure exerted by the compressiometer Why use a calibration kit ? Each tube is defined by several parameters such as his fill rate, his diameter, his volume ...
Voltage: 0 V - 20 V
... lasting Lithiumion battery pack. Supplied complete with carrying case, charger, and leads. Features: • Versatile load cell calibrator with multiple functions • Display, test, simulate, source—all in one unit • Rechargeable Lithium-ion ...
... PC-420 field documenting multifunction calibrator is the top instrument of the range. It is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field and lab measurements, it can ...
Sensotec Instruments
MICROTECH manufacturing stand for ruler and tape calibration with measuring range up to 3000mm (120 inch). Tapes can be control with range up to 50m. This calibration stand gives possibility for quick rulers and tapes control and save results to internal ...
MICROTECH
... Our laboratories are fully equipped to perform NIST traceable flow calibrations for Variable Area Flow Meters (Rotameters), Mass Flow Controllers and Mass Flow Meters. We offer calibration services on meters and controllers of other manufacturers’ ...
Temperature: 0 °C - 50 °C
... Key features •Allows simulation of a piezoelectric transducer charge output •Precision 1000 pF shielded capacitor •Used for charge amplifier calibration •Converts voltage to charge •Easy to use The Endevco® model 2947C is a stable, precision, ...
... The Torque Calibration Tool helps our customers easily measure the application torque of their screw-on capping heads and the removal torque of applied closures. • Designed for plastic screw-on caps • Handheld tool, pre-set for all Zalkin screw-on ...
Zalkin
... The REX water calibration device improves the automatic twisting of sausages filled out into natural giving uniform length and calibre. It is extremely simplistic in operation and attached directly to a 400 fixed holding device without the use of tools ...
Noise level: 120, 160, 150, 140, 130 dB
Voltage: 115 V
... The Trig-Tek™ 402H Microphone Calibrator is a portable, self-contained, high-intensity acoustic microphone calibration source Product Information The Trig-Tek™ 402H provides a portable hand-held sound transducer that, when combined ...
Astronics Test Systems
Voltage: 110 V - 230 V
... CS3 Standard with DAkkS-Calibration Compact calibration system for checking and recalibrating of vacuum gauges in the range of 1.000 to 1 x 10-3 mbar. The base unit of the CS3 Standard is mainly comprising a stainless steel calibration ...
Voltage: 100 V - 200 V
... TECHNICAL DATA OVERVIEW All types of Oetiker Ear Clamps and Low Profile Clamps that can be closed using a pneumatic pincer should be closed with a recommended, uniform force. This results in a constant, reproducible tensile stress in the clamp material ...
Temperature: 0 °C - 40 °C
Voltage: 9 V
... Handheld Portable Sensor Calibrator – Model G06A02 The G06A02 is a compact, portable vibration calibrator designed for quick and reliable verification of accelerometers and vibration sensors. Engineered for accuracy ...
... FUNCTION Intrinsic calibration test includes COD/PP/EFL (focal length ratio), radial distortion K1-K6, and tangential distortion P1-P2. FEATURE The fixture and chart support multi-angle precision adjustment with wide compatibility; Modular ...
HyQuest Solutions’ Field Calibration Device FCD checks rain gauges in the field for accuracy. The portable lightweight device effectively enables field technicians to run functional tests and verifications of any rain gauge in the field. The use of FCD saves ...
KISTERS - HyQuest Solutions
Temperature: -40 °C - 70 °C
... The ALS-2 Ambient Light Sensor Calibrator provides a quick and simple method of verifying the performance of the ALS-2 in the field Area: Ambient Light Sensors The ALS-2 Calibrator provides a quick and simple method ...
... The Air sampler calibration instrument is mainly used to calibrate all microporous plankton samplers. It can quickly and accurately measure the flow of the sampler without increasing the load of the sampler, resulting in a large deviation of the flow ...
the best suppliers