Chemical product valves

138 companies | 568 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
floating ball valve
floating ball valve
Economy

DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C

... • Wide connection possibilities Applications • Water treatment Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve ...

See the other products
DIVATEC,SL
floating ball valve
floating ball valve
BV

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C

... Applications Construction of chemical facilities Water treatment Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid ...

See the other products
DIVATEC,SL
floating ball valve
floating ball valve

DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C

... Applications Construction of chemical facilities Water treatment Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid ...

See the other products
DIVATEC,SL
diaphragm valve
diaphragm valve
CAV-250

Pressure: 250 bar

... Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in modules of 2-5 valves/module. ...

ball valve
ball valve
PM

DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 370 °C

... Our high-performance ball valve PM is a one-piece, laser-welded design in 1.4404 with short welding ends. An integrated pressure relief system, a blow-out proof stem, a pre-stressed stop liner seal and virtually no dead space ensure the ...

See the other products
GEFA Processtechnik
butterfly valve
butterfly valve
49910 series

DN: 2.5 mm
Pressure: 3 bar - 10 bar
Temperature: 0 °C - 140 °C

... AVS Römer pressure relief valves are used for protection in closed circuits. When the set response pressure is exceeded, the valve opens and discharges the fluid. ...

See the other products
AVS Römer
ball valve
ball valve
Neles® T5 series

DN: 25 mm - 400 mm
Pressure: 25 bar - 100 bar
Temperature: -200 °C - 600 °C

... Metso’s Neles® T5 series top entry rotary ball valves are designed to meet the requirements of chemical, petrochemical and refining industries. Valves equipped with unique trunnion mounted Stemball®, ...

ball valve
ball valve
TM-585-70-66-AP

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 thermoplastic ...

See the other products
NIBCO
pneumatic valve
pneumatic valve
AG5696-C

DN: 0.5 in - 4 in
Pressure: 232, 355 psi
Temperature: -20 °C - 180 °C

... Plastic, Clamp, Position Indicator Dimensions to DIN32676, 3A Control Pressure: 4-6 Bar ...

See the other products
Taloar
aseptic valve
aseptic valve
VAA series

DN: 20 mm - 100 mm
Pressure: 3.5 bar - 6 bar
Temperature: 150 °C

... requirements of the tanks in the Pharmaceutical, Food & Beverage, Cosmetics, Dairy and Fine Chemicals industries. Our valves are suitable for direct installation on the bottom of tanks and preparation ...

See the other products
AERRE INOX Srl
cartridge valve
cartridge valve
50.005.801

DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C

... 2/2-way, latching cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve opens and closes. The manual actuation ...

See the other products
A. u. K. Müller
high-flow valve
high-flow valve
PULSE HF

DN: 1.5 in
Pressure: 15,000, 10,000 psi
Temperature: -5 °C - 50 °C

... PULSE HF high-flow ultrasonic chemical injection metering valves (CIMVs) are designed for injection of monoethylene glycol (MEG) and methanol as part of a subsea hydrate mitigation strategy. They have been developed to ...

ball valve
ball valve

DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar

... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...

See the other products
SOMAS
pneumatically-operated valve
pneumatically-operated valve

... The air and vacuum valves are units manufactured by Famat. Designed with a body made up of ductil iron, cast steel, and stainless steel, the valves are capable of guarding huge water transmission vessel ...

See the other products
FAMAT
floating ball valve
floating ball valve
330/630

DN: 8 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C

... Ball valves with internal and external threads, with cutting ring threaded joint, pressure gauge ball valves and measuring lead plug valves In the on/off operation for general industrial supply systems, ...

See the other products
Pentair Valves & Controls
diaphragm valve
diaphragm valve

DN: 1.8 mm
Pressure: 1 bar - 8 bar
Temperature: 5 °C - 180 °C

... solenoid diaphragm valve employs a unique mechanism to absorb the dimensional changes of the plastic body caused by temperature changes. No leakage with high temperature fluids. ・Most suitable for the case sulfuric acid is heated for ...

butterfly valve
butterfly valve
Extreme

... Cepex is developing now a new range of products specially thought for the most exigent industrial applications: The Extreme Series, with Ball valves, Butterfly valves and Diaphragm valves ...

pneumatically-operated valve
pneumatically-operated valve
AMDZ*3 series

Pressure: 0 bar - 1 bar

... The smallest size 1/4" in the industry NOW AVAILABLE!! Smallest in the market*(*According to own research by Aug.2011) Conventional 65% ...

See the other products
CKD
seat valve
seat valve
S

DN: 25 mm - 150 mm
Pressure: 0 bar - 22.7 bar

... suit the process conditions - Valve disk with balancer: Reduces pressure surges when closing in the direction of flow The cone-shaped valve disk ensures a gentle transfer of the product - ...

See the other products
Evoguard GmbH
butterfly valve
butterfly valve
Tecfly VPI-02 series

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C

... Body material Ductile iron GGG50 PN (end) PN10/16-ASA150-JIS10K Contact sealing Heat EPDM Disc material Ductile iron GGG50 coated Connection between flanges Operating system Lever ...

See the other products
TECOFI
butterfly valve
butterfly valve
1155 series

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -25 °C - 200 °C

... The 1155 series comprises units with long necks for isolation cases, an ISO 52211 certified mounting pad and wafer-type products with two parts for the stem and two for the body. These have a PTFE seat that measures 3mm in thickness as ...

See the other products
SFERACO
plunger valve
plunger valve
50C05

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C

... toxic Yi volatile gas and liquid process control. 850C lined PTFE corrosion resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking ...

See the other products
SuZhou KoSa Environmental Protection CO.,LTD
ball valve
ball valve

DN: 1 in - 4 in

... Ball type Flush Bottom Tank Valves are used for discharging of material from reactor vessels and tanks. Our Ball type Flush Bottom Tank Valves are available in full bore, reduced bore, manual & actuated with FLP solenoid ...

ball valve
ball valve
121LT series

DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C

... The KTN 121LT is our 3-way, full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, suitable for conducting ...

See the other products
KTN
knife gate valve
knife gate valve
81208

DN: 2.5 in
Temperature: 0 °F - 170 °F

... working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it?s products. ...

See the other products
LOCKWOOD
angle seat valve
angle seat valve
SERIE JF100

DN: 13 mm - 45 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C

... SERIES Angle seat valves - stainless steel In its single acting version, the valve is normally closed (or opened) by spring force. When the piston is moved by the force of the compressed air in the control head chamber, ...

See the other products
SENGA
gate valve
gate valve
GVMS

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

See the other products
DI NICOLA INFINAM
pressure valve
pressure valve
DRV04

DN: 0.25 in
Pressure: 3 bar - 200 bar
Temperature: 10 °C - 50 °C

... The Pressure regulating valve is suitable for reducing the material pressure to the required working pressure and for leveling out pressure fluctuations in the material supply of greases, oils and pastes. This ensures an absolutely uniform ...

See the other products
Dosier- und Prüftechnik GmbH
diaphragm valve
diaphragm valve
8F

DN: 0.5 in - 2 in
Pressure: 0.5 bar - 8 bar
Temperature: 0 °C - 80 °C

... connection, these valves are suitable for a splash water free environment. Due to the chemical nickel plating and the stainless steel float bar, they are protected against corrosion and can also be used ...

See the other products
PVA Schwimmerventile GmbH
top-entry valve
top-entry valve
BV-SG

DN: 2 in - 24 in
Pressure: 16 bar - 250 bar

... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...

See the other products
Athena Engineering S.r.l.
double block-and-bleed valve
double block-and-bleed valve
D3B

DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C

... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...

piston valve
piston valve
15334

DN: 45 mm
Temperature: 180 °C

... Port size 2" BSP Female Thread (ISO 228/1) - Input. 2" BSP Female Thread (ISO 228/1) - Output. Pressure range Min. 0/Max. 150 Housing material Stainless Steel 316 Microcast (CF-8M). Piston - Stainless Steel 316. Spring - Steel (SAE 6150) - White Zinc ...

control valve
control valve
MA

DN: 0.5 in - 24 in
Pressure: 1.6 MPa - 76 MPa
Temperature: -29 °C - 628 °C

... ASME B16.34 Valve body material: WCB/WC9/CF8/CF8M, etc. Flow characteristics: E%/L/Q Leakage level: ANCI FCI-02 IV/V/VI Product Features 1. - Good valve core stability. The sturdy and durable guide ...

plug valve
plug valve
AS series

DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C

... Large Flux, low resistance, no water hammer. Y type shape enlarged the flowing section, which could raise the flux by %30 and make flow more smooth. Super long working life, which help the stem adjust and lubricate itself automatically. ...

See the other products
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
gate valve
gate valve
SSGV series

... Available with various end connections for easy system integration Specifications : Material: Stainless Steel Type: Gate Valve Operation: Manual (handwheel or lever) Pressure Rating: Depends on exact model specifications Dimensions ...

See the other products
DIXON GROUP EUROPE
butterfly valve
butterfly valve
SBV series

DN: 64 mm - 218 mm

... technology ab valve, split butterfly valve, Powder containment transfer valve Fast and secure transfer for large quantities Containment transfer Economic solution Supply solution for closed transfer ...

See the other products
HANGZHOU GEEVO TECHNOLOGY CO., LTD.
ball valve
ball valve

... Full Material Offering: Bronze, Brass, Lead-Free Brass, Carbon Steel and Stainless Steel 100% Factory Testing for Quality Assurance Fully-Rated and Certified MATERIALS OF CONSTRUCTION Bronze Brass Lead-Free Brass ...

See the other products
Crane Process Flow Technologies GmbH
gate valve
gate valve
MP 160HT

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

... Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning ...

globe valve
globe valve
Z

DN: 15 mm - 250 mm
Pressure: 25, 16, 10, 40 bar
Temperature: -196 °C - 450 °C

... control elements to adjust flow of liquids and gases. Wide range of material and design versions make the valves widely sought-after in chemical industry, heat and power generation industry, paper ...

ball valve
ball valve

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves are ...

See the other products
Meca-Inox
ball valve
ball valve
BK1

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, ...

See the other products
Effast
butterfly valve
butterfly valve
MP

... Round-port isolating valve actuated by a three-lever system that rotates the disc through 90º. Rugged fabricated construction can withstand pressures up to 40 bar, depending on dimensions, and temperatures up to 500ºC. Various sealing ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us
DirectIndustry RFQ: Free quotation comparison tool
Receive and compare quotations for free
Describe your project
We select
the best suppliers
Compare quotations and complete your purchase