Chemical product valves

DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar

... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...

... The air and vacuum valves are units manufactured by Famat. Designed with a body made up of ductil iron, cast steel, and stainless steel, the valves are capable of guarding huge water transmission vessel ...

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 thermoplastic ...

DN: 8 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C

... Ball valves with internal and external threads, with cutting ring threaded joint, pressure gauge ball valves and measuring lead plug valves In the on/off operation for general industrial supply systems, ...

DN: 1.8 mm
Pressure: 1 bar - 8 bar
Temperature: 5 °C - 180 °C

... solenoid diaphragm valve employs a unique mechanism to absorb the dimensional changes of the plastic body caused by temperature changes. No leakage with high temperature fluids. ・Most suitable for the case sulfuric acid is heated for ...

... Cepex is developing now a new range of products specially thought for the most exigent industrial applications: The Extreme Series, with Ball valves, Butterfly valves and Diaphragm valves ...

DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C

... The KTN 121LT is our 3-way, full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, suitable for conducting ...

Pressure: 0 bar - 1 bar

... The smallest size 1/4" in the industry NOW AVAILABLE!! Smallest in the market*(*According to own research by Aug.2011) Conventional 65% ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C

... Features •High reliability due to thick-walled PFA lining: universal resistance and maximum permeation resistance •Safety also at high pressures and temperatures due to Heavy-Duty bellows •Chlor application: special design for particularly long ...

DN: 2.5 in
Temperature: 0 °F - 170 °F

... working pressures. Testing suitability for your application is always recommended. Lockwood Products Inc. does not warrant any particular application for it?s products. ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 22.7 bar

... suit the process conditions - Valve disk with balancer: Reduces pressure surges when closing in the direction of flow The cone-shaped valve disk ensures a gentle transfer of the product - ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C

... Body material Ductile iron GGG50 PN (end) PN10/16-ASA150-JIS10K Contact sealing Heat EPDM Disc material Ductile iron GGG50 coated Connection between flanges Operating system Lever ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -25 °C - 200 °C

... The 1155 series comprises units with long necks for isolation cases, an ISO 52211 certified mounting pad and wafer-type products with two parts for the stem and two for the body. These have a PTFE seat that measures 3mm in thickness as ...

DN: 13 mm - 45 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C

... SERIES Angle seat valves - stainless steel In its single acting version, the valve is normally closed (or opened) by spring force. When the piston is moved by the force of the compressed air in the control head chamber, ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 0.25 in
Pressure: 3 bar - 200 bar
Temperature: 10 °C - 50 °C

... The Pressure regulating valve is suitable for reducing the material pressure to the required working pressure and for leveling out pressure fluctuations in the material supply of greases, oils and pastes. This ensures an absolutely uniform ...

DN: 0.5 in - 2 in
Pressure: 0.5 bar - 8 bar
Temperature: 0 °C - 80 °C

... connection, these valves are suitable for a splash water free environment. Due to the chemical nickel plating and the stainless steel float bar, they are protected against corrosion and can also be used ...

DN: 2 in - 24 in
Pressure: 16 bar - 250 bar

... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...

DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C

... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...

DN: 45 mm
Temperature: 180 °C

... Port size 2" BSP Female Thread (ISO 228/1) - Input. 2" BSP Female Thread (ISO 228/1) - Output. Pressure range Min. 0/Max. 150 Housing material Stainless Steel 316 Microcast (CF-8M). Piston - Stainless Steel 316. Spring - Steel (SAE 6150) - White Zinc ...

DN: 0.5 in - 24 in
Pressure: 1.6 MPa - 76 MPa
Temperature: -29 °C - 628 °C

... ASME B16.34 Valve body material: WCB/WC9/CF8/CF8M, etc. Flow characteristics: E%/L/Q Leakage level: ANCI FCI-02 IV/V/VI Product Features 1. - Good valve core stability. The sturdy and durable guide ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C

... Large Flux, low resistance, no water hammer. Y type shape enlarged the flowing section, which could raise the flux by %30 and make flow more smooth. Super long working life, which help the stem adjust and lubricate itself automatically. ...

... Available with various end connections for easy system integration Specifications : Material: Stainless Steel Type: Gate Valve Operation: Manual (handwheel or lever) Pressure Rating: Depends on exact model specifications Dimensions ...

DN: 64 mm - 218 mm

... technology ab valve, split butterfly valve, Powder containment transfer valve Fast and secure transfer for large quantities Containment transfer Economic solution Supply solution for closed transfer ...

... Full Material Offering: Bronze, Brass, Lead-Free Brass, Carbon Steel and Stainless Steel 100% Factory Testing for Quality Assurance Fully-Rated and Certified MATERIALS OF CONSTRUCTION Bronze Brass Lead-Free Brass ...