Digital I/O

... 8 Digital Inputs, 8 Digital Outputs and an RS485 Gateway Port Control any input or output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated DIN rail mount Supports simple ASCII or industry ...

The PCI-Express board with 32 digital outputs APCIe-2032 has 32 digital outputs, 24 Vand a programmable watchdog. It is especially suited for applications like signal switching, ON/OFF monitoring of motors, lights etc., als interface to electromechanical ...

... Transform Transforms analogue measurements into digital data Real-time Real-time digital measurements with alarm functions Calibration Individual calibration Limitless Limitless measurement possibilities Limitless possibilities The SenseAnywhere ...

... Industrial IoT Remote I/O • - Access data through Modbus/TCP/RTU/ASCII • - Supports MQTT for IIoT applications • - 2 x redundant LAN ports • - Support for MQTT Security over TLS • - Optional WiFI version with Client mode • - Up to 20 x different ...

Together with the central computers, the EN 50155 qualified input / output modules make it possible to build complete train control control (TCMS) architectures. These acquisition and control modules are based on a generic platform: the “Basic Remote”. ...

... TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general remote Ethernet IO monitoring and control. The device ...

The ELPRO 115E-2 Ethernet Networking I/O and Gateway is a multiple I/O node that extends communications to sensors and actuators in local, remote, or difficult to reach locations. Designed to work with wired and wireless devices, the ELPRO 115E-2 is capable ...

The RIO40S remote I/O module, based on a CANopen architecture, ensures fast and reliable communication. Ultra compact, it can be easily integrated into any type of cabinet or electrical cabinet. Thanks to its RJ45 connectors designed for quick and easy ...

I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer, computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 ...

... The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is ...

... Flexible inputs and outputs Integrate with lifts, heating, lighting and more Connects directly to LAN/WAN only 4 mains rated relay outputs per board 4 inputs per board For use with Net2 triggers and actions feature About - The Net2 I/O ...

... DeviceNet Digital Remote I/O (Terminal Block Type/Sensor Connector Type) The ARD-D series digital remote I/O units provide input/output expansion and communication for various devices using DeviceNet protocols. The ARD-D series is available in terminal ...

... Pluggable I/O Module for FP2 and FP4 Series Features Power from HMI Nominal Input Voltage 24VDC Nominal Output Voltage (PNP) 24VDC) Nominal Output Current 250mA @ 24VDC for PNP, 2A @ 230VAC & 24VDC for Relay Max. O/P frequency ...

... VPA 3CG Profibus Adapter VAMP protection relays can be connected to Profibus BP by using an optional Fieldbus card, or via this external device Relay can be monitored from the host system Fieldbus board can be installed inside a VAMP 200 Series relay Normally ...

This product is a remote I/O model CPU unit that has RS-232C *1 and LAN interfaces in addition to four expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O modules. In addition, this product can be controlled ...

... For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.5 mA at +24 V Input delay - typically 1 µs Type - +24 ...

... Unit that converts 1 CH of IO-Link ports in IO-Link Master to 16-point of digital I/O Expandable I/O up to 256 (16 x 16) points by connecting to IO-Link Master UR Series. Digital input is Sink(NPN) / Source(PNP), all terminals are switched at once. Digital ...

... The Eckelmann I/O system adapts to your application. From simple digital input, to analog modules, to special and safety modules for high-end applications, the UBM I/O system offers everything needed for an innovative machine concept. The strengths ...

... Module with 4 contact inputs (digital inputs). The monitored contacts are powered by the module. Characteristics • Product type: Datalogger • Usage: Multiple Use • Memory capacity: 10'000 measurement cycles per logger • Dimensions:140 x 70 ...

... 4-Port x4 PCIe interface to support a total bandwidth of 1GB/s Supports four (PoE4) independent GigE Ports Compliant with IEEE 802.3af Single maximum power consumption 23.5W Internal DC 12V Power Input External DC 19-36V Power Input ...

... The digital I/Os are optimized for fast detection of digital signals and switching of actuators. They can be operated directly on a controller or remotely via a bus coupler. The modules are available in various granularities for inputs and outputs. ...

A highly cost-effective, dual-channel CAN card makes the connection between Copley Controls’ distributed control software and CANopen servo and stepper drives. The two independent CAN ports are galvanically isolated to provide greater noise immunity in ...

The 8012e Low Profile PCI Express digital interface provides eight optically isolated inputs and eight Reed relay outputs (SPST). The isolated inputs are non-polarized and rated for 3-30 VDC. Optical isolation protects the PC and other sensitive equipment ...

... The system comprises of 12 relay containing make and brake contacts. It also has 8 transistors for outputs and provides over voltage protection. It has a output current of 24V/2A or 48V/1A with a galvanic isolation of 1500Vrms. The output current ...

To transform Revolution Pi into an industrial control unit, various digital I/O modules can be connected to the base module RevPi Core. The I/O modules come in three versions. All have the same 28-pin I/O connector at the front (connector with two rows ...