DN: 80 mm
Pressure: 6 bar
... the VZ series manual or control pinch valve encompasses the sleeve -the essential part of every pinch valve- and a body. The pinch valve sleeve can be connected directly to the closing mechanism with ...
DN: 10 mm - 100 mm
Pressure: 25 bar - 63 bar
Temperature: -20 °C - 150 °C
... full-bore stainless steel ball valve, DIN 11851 threaded-ends GENERAL FEATURES: • The valve is manufactured in 316L stainless steel and suggested for particular hygienic conditions (food industry applications). • ...
DN: 0.5 in - 6 in
... available. Standardized designs: ASME BPE fully compliant series. 3A 68-00 #3828 certefied valve series. Valves ends per ISO 1127 and DIN EN 10357 ( DIN 11850) available. HermetiX ...
DN: 8 mm - 150 mm
Pressure: 125 bar
... combined with all connection variants. Cleaned, packaged and labelled for use with food applications. Mounting flange DIN EN ISO 5211 Test DIN EN 12266 P10 P11 P12, leakage rate A ...
GEFA Processtechnik
DN: 0.5 in - 4 in
Pressure: 232, 355 psi
Temperature: -20 °C - 180 °C
... Stainless Steel, Clamp, Position Indicator Dimensions to DIN32676, 3A Control Pressure: 4-6 Bar ...
Taloar
DN: 10 mm - 100 mm
Pressure: 10 bar - 90 bar
Temperature: -20 °C - 160 °C
... Two-way ball valve Drive: ISO 5211 - DIN 3337 flange for actuator Connection: According to normative BS/OD (ASTM A270) for TUBE Flow: full and reduced Material: Aisi 316 Measure: from 1/2” to 4” Seals: virgin P.T.F.E. ...
AERRE INOX Srl
DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F
... Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and either 24 VDC or 120 VAC solenoids. ...
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... using float valves. Valves of this design are 2-chamber globe valves and have an additional back flow preventer to provide additional protection against backsiphonage of service water into the drinking ...
DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C
... YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL CHARACTERISTICS Temperature-20°-120°C Fluidair, ...
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: 0 °C - 120 °C
... thread as per DIN/EN ISO 228-1 Flat-sealing regulating valve Differential pressure across the control unit is kept constant; valve authority 1 Valve body and plug made of dezincification-resistant ...
Fr. Sauter AG
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C
... Radial installation or removal Safety locking handle system Double sided blocked ball Full sectional area of flow Seal materials - EPDM, FPM Connections - flange, PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals ...
Praher Plastics Austria GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... vertical to horizontal (in relation to shaft) Materials Case : brass ( DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve ...
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
... acc. to EN 558, basic series 20 ( DIN 3202 / K1) Lug-type for flanges acc. to EN 1092-2 Centric disk, mounted in three maintenance-free bearing bushes For bolting between pipe flanges As end-of-line valve ...
VAG-Group
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C
... worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed for the rationalization ...
DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
... The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
ASA technology Produktions- und Vertriebs GmbH
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C
... Maintenance-free and adjustable stem sealing Specifications •Design - ISO/ DIN •Nominal Pressure - 16 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face - DIN EN 558-1 and ISO 5752 series 1 •Flanges ...
Richter Chemie Technik
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal and industrial ...
DN: 0.25 in - 3 in
Pressure: 40, 63, 50, 25 bar
Temperature: -20 °C - 180 °C
... 2 pièces carbon Steel bail valve DIN M3 with full bore for Chemical industries, petrochemical industries, hydraulic installation, heating, water distribution and compressed air. Length according to EN 16722 Sériés ...
SFERACO
DN: 90 mm - 225 mm
Pressure: 16 bar
... Resilient seated gate valve combined with flange T-Piece Space saving installation through short design as well as savings in material, work, transport and storage costs The compact design enables the valve ...
Hawle
DN: 25 mm
Pressure: 6, 12, 16 bar
Temperature: 0 °C - 130 °C
... Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from the vessel), to control product contamination against external air that may fill ...
VALSTEAM ADCA Engineering S.A.
DN: 0.5 in - 10 in
Temperature: -29 °C - 120 °C
... variety of this series of ball valves manufactured to API, ASME, DIN And JIS standards. - Usually furnished with flanged end connection. - Due to the low-pressure ratings and small sizes, the torque t o open or close ...
Athena Engineering S.r.l.
DN: 4 mm
Pressure: 0.6 MPa - 1.2 MPa
... The control valve in the cab has 4 positions, which is used in conjunction with the slow-lowering tank valve to realize the lifting, mid-stop, lowering and slow-lowering functions of the vehicle. The cover plate insert ...
DN: 0.5 in - 6 in
Temperature: -20 °C - 150 °C
... ANSI FORGED STEEL LONG STEM BALL VALVE MLDQ41F-150 * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...
Yongkang Yonlin Industry & Trade Co.,Ltd Yongkang Lianggong Valve Co., Ltd.
DN: 15 mm - 250 mm
Pressure: 16 bar
Temperature: -40 °C - 180 °C
... stainless steel bodied full bore, two piece ball valves flanged and drilled to PN16/40 are suited for various applications. They have a face to face to DIN 3202 F4, EN 558-1-27 standards. These valves ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
DN: 0.75, 0.5 in
Pressure: 6 bar
Temperature: 0 °C - 80 °C
... Connectivity standard External thread GAS cylindrical ISO 228/1 Connectivity standard Bucchi srl for pipe fittings adopts as standard connection ISO 228/1; in order to improve hydraulic seal has decided to create its own internal regulations, based ...
Bucchi S.r.l.
the best suppliers