Volumetric flow rate: 1.7 m³/h - 5,100 m³/h
Process temperature: 20 °F - 120 °F
Process pressure: 200 psi
... A in 3.87 | A mm 98 |
Flow Range 2–200 SCFM (3.
4–340 m3/hr)
Series 9093 | Pipe Size 1 1/
4" | A in
4.24 | A mm 108 |
Flow Range
4–400 SCFM (6.8–680 ...
Volumetric flow rate: 10.2 m³/h - 5,100 m³/h
Process pressure: 0 psi - 200 psi
... mm: 250 |
Flow Range: 50-5000 SCFM
Series: P90101 | Pipe Size: 8" | in: 11.84 | mm: 301 |
Flow Range:
100-6000 SCFM
Dimensions and Flow Range – Type L Copper Pipe
Series: ...
Volumetric flow rate: 10.2 m³/h - 6,796 m³/h
Process temperature: -6.67 °C - 48.89 °C
Process pressure: 0 psi - 130 psi
... SCFM
H9098 |
4 in | 8.82 | 224 | 20–2000 SCFM
H90100 | 6 in | 10.95 | 278 | 50–5000 SCFM
H90101 | 8 in | 12.95 | 329 |
100–6000 SCFM
Dimensions and Flow Range (Copper Pipe)
Model ...
Volumetric flow rate: 3 m³/h - 3,200 m³/h
Process temperature: -10 °C - 40 °C
Process pressure: 0 Pa - 200,000 Pa
... readings of flow velocity, totalized volume, temperature, pressure and methane concentration directly. • Built-in industrial lithium battery for backup power supply. Specifications Applicable pipeline: DN32, DN50, DN80, DN 100, DN125, DN150, DN200, DN250, DN300 Accuracy ...
Volumetric flow rate: 0.2 m³/h - 95,560 m³/h
Process pressure: 1.6, 1, 0.6 MPa
... and lower requirement for straight pipeline. DN 6 to DN2000 covers a wide range of pipe size. A variety of liners and electrodes are available to satisfy different flow characteristic. Programmable ...
Volumetric flow rate: 0.1 m³/h - 110,000 m³/h
Process temperature: -40 °C - 150 °C
Precision: 0.2 %
... The electromagnetic flow meter offered by Tecnopenta Srl is the ideal tool for precise and reliable flow measurement of conductive liquids, even chemically aggressive ones, in industrial and process environments. Thanks ...
Precision: 1 %
Repeatibility: 0.2 %
Volumetric flow rate: 40 m³/h - 313 m³/h
Process temperature: 0 °C - 50 °C
Process pressure: 16, 10 bar
... STANDARDS OF MANUFACTURE EN 1092-2 DRILLING FLANGES MATERIALS BODY CAST IRON EN 1561 (OPT. EN GJS-400-15 EN 1563) CORROSION PROTECTION COATED INSIDE-OUTSIDE FIG.650 (FBE) EPOXY 300 MICRONS RAL 5005 FIG.650IRR (FBE) EPOXY 200 MICRONS RAL 7016 CERTIFIATES D.M. ...
the best suppliers