- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- DN100 - 4" flow meter
DN100 - 4" flow meters
Volumetric flow rate: 0.1 m³/h - 381,703.5 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 250 bar
... Electromagnetic Flow meter does not have any moving parts, ideal for wastewater applications or any dirty liquids which is conductive or water based, or for applications where low-pressure drop and low maintenance are ...
Holykell
Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.5, 0.2 %
... The Economic type Clamp-on Ultrasonic Water Flowmeter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. Application ...
Holykell
Volumetric flow rate: 0 m³/h - 800 m³/h
Process temperature: -20 °C - 110 °C
Process pressure: 40, 25, 120, 63, 160 bar
... Turbine flowmeter is fully comprehensive (all intelligence) which is developed in using the advanced technology from domestic and foreign countries and consisted of 4800-type flow sensor and 4800-type smart converter ...
Holykell
Volumetric flow rate: max 300.0 l/s
Process temperature: 0 °C - 40 °C
Process pressure: 0 bar - 20 bar
... AQ FLOW SENSOR – Precise. Robust. Truly Real-Time. The AQ FLOW SENSOR is a patented insertion flowmeter, offering a smart alternative to ultrasonic and inductive devices. It enables real-time flow measurement ...
Volumetric flow rate: max 300.0 l/s
Process temperature: 0 °C - 40 °C
Process pressure: 0 bar - 20 bar
... accessible with special tools – even if buried over 2 meters deep. In under 4 hours, the system provides accurate flow, pressure, and temperature data directly from the pipe. The built-in AQ FLOW ...
Volumetric flow rate: max 300.0 l/s
Process temperature: 0 °C - 40 °C
Process pressure: 0 bar - 20 bar
... Hydrant Flow Sensor – True-Born Underground Integration The AQ IoT Hydrant Flow Sensor is a patented, in-house innovation designed for true-born underground hydrant integration. It offers a simple and cost-effective ...
... compressed air flow meter is designed to be easy to use, affordable and it's offering a wide measurement range. This makes it easy for you to choose the right flow meter, the S401 which ...
Volumetric flow rate: 44 m³/h - 29,653 m³/h
Process temperature: 40 °C - 230 °C
Process pressure: 0 Pa - 1,600,000 Pa
... the flow in your compressed air system. Properly installed (refer to instruction manual for details) the sensor can measure in wet and dirty gases as occurring, for example, at the discharge of a compressor. The S430 compressed air ...
Process pressure: 1.6, 2.5, 4 MPa
Precision: 5 %
... Electromagnetic flowmeter type PEM-500 is applicable to the measurement of flow of the liquids with minimum conductivity of 5ěS/cm. Device measures flow and volume of liquids in both directions of ...
... The NUFLO Cone DP Flow Meter inherently conditions the velocity flow profiles making it a meter of choice anywhere that space and weight reduction is an asset. While this metering technology ...
Process temperature: -40 °C - 150 °C
Precision: 1 %
... calibrations. For liquids Stationary · portable Flow velocities: 0 ... ±30 m/s Measuring units: volume flow, flow velocity, thermal output Connection: clamp-on for pipe sizes DN10 ...
KOBOLD Messring GmbH
Volumetric flow rate: 0.174 m³/h - 94.2 m³/h
Process temperature: -40 °C - 120 °C
Process pressure: 0 bar - 11 bar
... Flow monitor RHEASREG® SW Mechanical RHEASREG® SW paddle flow monitor with switching output, in an impact resistant plastic housing, with stainless-steel paddle, for flow ...
Process temperature: -40 °F - 2,192 °F
Process pressure: 150 psi - 900 psi
... manufacturing of the complete (end-use) ready meter tube construction. The CoFlo fitting on the downstream portion of the orifice fitting reduces the required number of flanges that goes into a typical (WxF fitting) meter ...
Mass flow rate: 10 kg/min - 800 kg/min
Process temperature: -196 °C - 350 °C
Process pressure: 0 bar - 462 bar
... 1.4410, Tantalum – UNS R05200 Process Connection: 1 ¼" up to 3" General Specifications Serial Tube / Single Path Flow rates Qmax, Qnom and Qmin for "serial" sensors will be 50% of the above listed parallel/dual path version. Electrical ...
Rheonik Messtechnik GmbH
Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -50 °C - 300 °C
Process pressure: 10 bar - 40 bar
... Flowmeter for liquids and gases high accuracy product specific scale several options Operation: The instruments, type SC-250, are variable area flowmeter. ...
Volumetric flow rate: 50 l/min - 25,000 l/min
Process temperature: -20 °C - 120 °C
Process pressure: 12 bar
... positive displacement flowmeters offer a high level of accuracy and repeatability. These precision meters are used for flowrate measurement in flow monitoring, control applications and for totalising ...
Volumetric flow rate: 10 l/h - 60,000 l/h
Process temperature: -40 °C - 150 °C
Process pressure: 10, 16 bar
... Flow measuring and volume totalization of condensated steam and fuel, tank filling. Widely used in oil industry, measurement of honey, chocolate, paint, resin, inks, etc. Materials Body: EN 1.4404 (AISI 316L), PVC, PP y PTFE Pistón: ...
TECFLUID
Process temperature: -10 °C - 120 °C
Process pressure: 0.6 MPa - 4 MPa
Precision: 0.5 %
... coil, the following electromotive E is generated in proportion to flow speed v: Where: E-Induced electromotive force K- Meter constant B-Magnetic induction density V-Average flow speed in cross-section ...
Supmea Automation
Volumetric flow rate: 0 m³/h - 1,130 m³/h
Process temperature: -20 °C - 180 °C
Process pressure: 10, 16, 25, 40 bar
... The intelligent flow sensors of the induQ® series work according to the induction principle: the measuring pipe is surrounded by a magnetic field (B). If an electrically conductive medium with the flow rate to be determined ...
SIKA
Process temperature: -40 °C - 80 °C
Process pressure: 150 psi
Precision: 1 %
... Integrates flow-range adjustments, and meter validation and diagnostics Gives you the ability to “field-validate” your meter’s calibration ow does a thermal mass flow meter ...
Volumetric flow rate: 25 l/min - 3,000 l/min
Process pressure: 10 bar
Precision: 0.2 %
... M-80E-1 Meter with electronic register, air eliminator, strainer and solenoid valve Excellent stepless fine-tuning device allow plus-minus calibration of flowmeter High accuracy and repeatability over the widest range ...
Zhejiang Datian Machine Co., ltd
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
... VPFlowScope M can be installed under pressure and measures (bi-directional) flow, pressure, temperature, and total flow simultaneously. The flow meter is an all-in-one and versatile flow ...
VPInstruments
Process pressure: 25 bar
... class ultrasonic flow meter QALCOSONIC F1 can be mounted safely, quickly and even under the water. FEATURES: • - Temperature class T30, T30/90, T90 • - Diameters: DN 50, DN 65, ...
Volumetric flow rate: 0.1 m³/h - 9.5 m³/h
Process temperature: -20 °C - 130 °C
Process pressure: 0 bar - 64 bar
... The RIF 100 is an electromagnetic flow meter that utilizes Faraday's principle to measure the velocity of the liquid and convert it into a signal proportional to the flow. Among its ...
Riels Instruments
Volumetric flow rate: 10 m³/h - 2,000 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 MPa - 1 MPa
... A new flow meter with a new function (RS485 Output) has been added to the popular lineup of the TRX/TRZ series. It helps you save energy by measuring and “visualizing” flow rate, temperature and pressure. Global ...
Volumetric flow rate: 0.04 m³/h - 800 m³/h
Precision: 1, 0.5 %
... Caliber: DN 4~ DN200 Outputmode: pulse.RS485. 4-20mA Accuracy: ±0.5%FS. ±1%FS Flowrange: 0.04~800m ³/ H ...
Volumetric flow rate: 100 l/h - 60,000 l/h
Process temperature: 80, 100, 110 °C
Process pressure: 40 bar
... tube variable area flow meter model ML for medium-sized and large flows The metal tube variable area flow meters incorporate the best features of the variable area flow ...
Volumetric flow rate: 0 m³/h - 180 m³/h
COMETEC SA
Process temperature: -25 °C - 60 °C
Precision: 1 %
Repeatibility: 0.2 %
... Series DUS-TT-PC wall-mount Clamp-on Transit Time Ultrasonic Flow Meters provide abundant capabilities for accurate liquid flow measurement from outside of a pipe. It utilizes state-of-the-art technologies ...
Prisma Instruments
Process temperature: -20 °C - 70 °C
Process pressure: 16 bar
... existing and future systems • Robust ultrasonic water meter with smart metering Real data provider for decision-making: • Digital interface: volume, alarms, lifetime, temperature & reverse flow • Measuring ...
INTEGRA Metering AG
the best suppliers
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group