Drain pumps

Flow: 50 l/s
Head: 40 m
Power: 7 kW

... D ELECTRIC SUBMERSIBLE PUMPS FOR DRAINAGE Electric submersible pumps designed for raising drainage water. Thanks to their amenity and sturdiness they are used for draining out excavations even under ...

Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar

... Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation ...

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

... High efficiency IE3 electric pump Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks ...

Flow: 44 l/min - 55 l/min
Head: 6, 7, 8, 9 m
Power: 42 kW - 78 kW

... Circulating pumps are referred to as circulation pumps, which are designed to generate a forced fluid circulation in a closed system. Examples that apply circulation system for water filter machine or coffee machine. ...

Flow: 4,000, 12,000, 1,500 l/h
Pressure: 6 bar
Fluid temperature: 80 °C

... Eccentric Disc Pumps have been specifically designed for transferring sensitive products. These self-priming pumps feature quick and easy hand cleaning as well as clean-in-place (CIP) capabilities, critical ...

... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Compact, economic, ...

Pressure: 30, 60 bar
Length: 240 mm
Width: 145 mm

... TestPower HP140 Flow rate: 62 cm³/Hub Dimensions: 240x145x610 mm ...

Flow: 150 m³/h - 11,000 m³/h
Head: 5 m - 40 m

... Fairbanks Nijhuis mixed flow pumps function as a compromise between radial and axial flow pumps. They operate at higher pressures than axial flow pumps while delivering higher capacities than radial flow ...

Flow: 5.1 l/min - 70 l/min
Head: 4.1 m - 15 m
Power: 6 W - 72 W

... signal with an open collector ( drain). Features of NRD series Seal-less design The pumps are equipped with a small, lightweight canned motor encapsulated in resin. This construction requires less space than ...

Flow: 0 us gal/min - 130 us gal/min
Head: 0'00" ft - 39'00"

... piping connection. Power cord is 20 feet long APPLICATIONS Vortex submersible sewage pumps for simplex and duplex installations in small lift stations, drainage systems or raw water applications ...

Flow: 0 m³/h - 120 m³/h
Head: 0 m - 300 m

... transferring liquids of low viscosity, non-inflammable and non-explosive, not containing solid particles or fibers Water supply & drainage for high-rise buildings, filtration and transfer at waterworks, pressure boosting in main pipe Washing ...

Flow: 0 m³/h - 6 m³/h
Head: 0 m - 7.5 m
Power: 0.37 kW

... The weight refers only to the packaging without the pump inside Accessories FLANGE KIT (DIN standard – ANSI on request): – KITFLANGMB080P (PP pump) – KITFLANGMB080F (PVDF pump) ...

Flow: 6.8 m³/h - 114 m³/h
Pressure: 14 bar
Fluid temperature: -29 °C - 205 °C

... The 4223AX Series™ internal gear pump is the ideal solution for crude oils (light, heavy, and sour), fuel oils, petrochemicals, and more. It comes with API 682 Category 1, 2 or 3 cartridge seals with optional API seal support plans. Features ...

Flow: 0 m³/h - 6.5 m³/h
Power: 0.22, 0.32 kW
Width: 276 mm

... program) or outdoor applications like drainage or rainwater can easily be handled by this pump. Depending on the application it can be used either in a fix installation or as a mobile pump. For fix installations ...

Flow: 1.2 m³/h - 9 m³/h
Head: 1.5 m - 7.6 m
Power: 0.25 kW

... submersible pump with mechanical seal in oil bath and oversized oil chamber. Possibility of fixed or mobile installation and suitable for domestic applications and large industrial drainage installations. AISI 304 ...

Flow: 3 m³/h - 90 m³/h
Pressure: 0.85 bar
Head: 10 m - 80 m

... The sine pump is composed of special rotors and is used for transporting high-viscosity materials with easily granular components, such as yogurt with fruit pulp, granular sauces, and so on.
A gate functions as a seal between the inlet ...

Flow: 4 l/min - 40 l/min
Pressure: 10 bar - 70 bar
Width: 126 mm

... Variable Displacement Vane Pump With Gerotor, Cooling Gerotor Variable Displacement Vane Pump with Cooling circulation pump is CML Unique and patented design. First, improve machining accuracy. By ...

Flow: 220 l/min
Pressure: 310 bar
Input diameter: 275 mm - 400 mm

... Product Description
Our drum pump AP200-56-1 enables the transfer of adhesives and sealants. It can be used to supply one or more dispensing workstations or dispensing systems, as well as for filling cartridges. This allows ...

Flow: 0 l/min - 1.14 l/min
Pressure: 50 bar - 150 bar
Fluid temperature: 10 °C - 40 °C

... Advantages Our barrel pumps are characterized by high product quality, reliability and long service life. Application of high pressure barrel pumps with follower plate ensures optimal emptying of the barrels. In addition, ...

Flow: 160 m³/h - 414 m³/h
Head: 20 m - 95 m
Power: 37 kW - 132 kW

... Suitable for water supply and drainage of factories, mines, cities and power stations, irrigation and drainage of farmland and various water conservancy projects.SM, SF and SY pumps are formed on the ...

Flow: 1,600 m³/h
Pressure: 10, 16 bar
Fluid temperature: -20 °C - 150 °C

... Coupled Centrifugal Pump Coupled centrifugal pumps are a widely used type of pump for transporting liquids. These pumps transmit power through a coupling between the motor and the pump. ...

... centrifugal pump. Submersible Pump-Motor is used drainage, sewage pumping, general industrial pumping and slurry pumping. Submersible Pump-Motor manufactured in India, China, European Origin available. · ...

Flow: 4 m³/h - 1,200 m³/h
Head: 8 m - 150 m
Power: 2.2 kW - 180 kW

... Hydraulic pump develops into HOT WATER CIRCULATION PUMPS (KYWR/KYLR), chemical engineering pump (KYHL), oil pump (KYYG) and ex proof chemical pump (KYHY) according to ...

Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm

... Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid bodies (50 ...

Flow: 0 us gal/min - 26 us gal/min
Pressure: 0 psi - 2,900 psi
Head: 0'00" ft - 52'00"

... Diameter - 27 1/2" (70 cm) - Discharge - 12.75" O.D. Pipe or Flange - Solid Handling - 1" (25 mm) - Hose Ports - 1" NPT - Pump Body - Cast Iron - Impeller/Screw - Bronze - Elastometers - Buna N (Std) - Hydraulic Oil - 214-320 ...

Flow: 0.01 m³/h - 67.86 m³/h
Pressure: 1 bar - 24 bar
Power: 0.9 kW - 39.3 kW

... progressing cavity pumps – PCM EasyFeed. The PCM EasyFeed progressing cavity pump (food grade version) with Moineau™ technology is ideal for transferring highly viscous, heterogeneous with or without particles, pasty ...

Flow: 140 l/min
Pressure: 0.37 bar
Power: 80 W

... That saves energy and reduces the amount of water needed. Thus, the pump utilizes the same principle of operation as our tried-and-tested synchronous drain pumps. The bypass angle has been extended to ...

Flow: 0 m³/h - 5,000 m³/h
Pressure: 0.2 bar
Power: 1.1 kW - 18.5 kW

... Axial pumps designed to pump large volumes of fluid with low back pressure. The pump is mostly used in wastewater treatment plants for the recirculation of sludge, but may also be used in e.g. drainage, ...

Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW

... for the pump NPF 1/10. It can be assembled with drainage nozzle and valve. All the pumps are equipped with a screw for additional mechanical mixing before sewage get into the pump. Up ...

Flow: 800, 500 l/min
Head: 15.5, 12.9 m
Power: 1.1, 2.2 kW

... Selfpriming monoblock water pumps with open impeller can be extracted directly from the inspection hatch. The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time. The ...

Flow: 0 m³/h - 7,000 m³/h
Power: 255 kW

... Pumping of turbid or slightly contaminated liquids. Cooling pumps in power stations Conventional thermal plants Sea water pumping. Industry Aquaculture farms Theme parks Materials Pump body, ...

Flow: 32 l/h
Head: 3 m
Power: 30 kW

... Item number: 9005801001 Application The EE1750M condensate pump equipped with a float control is designed for use in units that have a condensate collecting container with drainage pipe connection, such as cassette, ...

... Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy spills or wasted fluids. Another ...

Flow: 0 m³/h - 39 m³/h
Head: 0 m - 9.2 m
Power: 0.55 kW - 1.5 kW

... Application The PFA pumps are immersible, single-stage rotary pumps equipped with a single-sided centrifugal rotor. The pumps are designed to pump water, polluted liquid, faeces, and ...

Flow: 66 m³/h
Pressure: 3 bar
Head: 5 m - 29 m

... Submersible Drainage Pumps, Vortex Impeller. Portable installation. Materials : Cast Iron Flange : Threaded flange or with elbow Applications : Waste water for domestic and small commercial ...

Flow: 580 m³/h
Pressure: 14 bar

... commutable shaft sleeve. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump works. The pump has a reasonable design of oil drain ...

Flow: 0 m³/h - 3,000 m³/h
Pressure: 16, 25 bar
Head: 0 m - 180 m

... disassembly of the rotor group for maintenance or repair without distorting pump alignment and suction and discharge piping. • Impeller is double suction. • This feature increases pump suction performance in addition ...

Flow: 5 m³/h - 450 m³/h
Pressure: 10 bar
Head: 4 m - 100 m

... m-Drive series pumps are single stage, end suction, seal-less volute type pumps with magnetic coupling. • Single entry, closed impeller is hydraulically thrust compensated and dynamically balanced. • Main dimensions according ...

Flow: 0 m³/h - 470 m³/h
Head: 0 m - 180 m

... Kirloskar DSM/DSMT split case pumps are horizontally mounted and axially split casing type, two stage pumps. Split case construction enables to remove the rotating unit of the pump without disturbing ...

Flow: 15 m³/h - 35 m³/h
Power: 2.2 kW - 5.5 kW

... other industries. The SCP pump is a horizontal single-stage single suction centrifugal pump. The pump has the self-priming capability, not the bottom valve. In addition to the first start, it is necessary ...