Electromagnetic clutches

Torque: 1 Nm - 280 Nm
Rotational speed: 2,000 rpm - 10,000 rpm

... the clutch drum. Due to the asymmetric arrangement of the flyweights, the torque that can be transmitted by this type of clutch depends on the direction of rotation. Construction and mode of operation The ...

Torque: 4.5 Nm - 280 Nm
Rotational speed: 2,000 rpm - 8,000 rpm

... must remain free to move axially against the return spring. Construction and mode of operation The basic model of electromagnetic clutch with bearing consists of stator body with cast-in coil and connection ...

Torque: 10 Nm - 640 Nm
Rotational speed: 2,200 rpm - 8,600 rpm

is an electromagnetic pole face clutch actuated by industrial current. By applying a DC voltage to the magnetic coil, a magnetic field is formed. This pulls the armature ...

Torque: 0.0565, 0.23, 0.113, 1.8, 0.85 Nm
Rotational speed: 0 rpm - 3,600 rpm
Power: 15 W - 450 W

Product Description Like the Hysteresis Brake, the Magtrol Hysteresis Clutch develops torque strictly through a magnetic air-gap, ensuring an absolutely smooth transmission of torque from the drive ...

Torque: 0.2 Nm - 150 Nm
Rotational speed: 2,500 rpm - 16,000 rpm
Power: 6 W - 45 W

The Active Clutch Line includes DC slip-ring-free single-disc clutches, in which the action of force of an electromagnetic field (electromagnetically closing) is used to transmit the torque. The clutches ...

Torque: 0.2 Nm - 5 Nm
Rotational speed: 40 rpm - 3,000 rpm

... features Adjustable and smooth transmission of torque Torque independent of rotation speed Noiseless Dustless Brushless clutch design

Torque: 0.2 Nm - 5 Nm
Rotational speed: 450 rpm - 3,000 rpm
Power: 12 W - 50 W

Electromagnetic particle brushless clutches The fixed coil special design is offering a very easy mechanical integration as no slip ring and brushes are needed for supplying the coil (Brushless solution) These devices ...

Electromagnetic particle through shaft clutches MEROBEL’s EMP series are mostly dedicated to the applications where slipping speed and slipping torque need to be controlled in an independent way. Built from the ...

Torque: 0.5 Nm - 500 Nm

COMBINORM C operating current-actuated clutches use the force flow concentrated on two pole faces of an electromagnet for non-positive connection of shafts and loads connected to these. Properties ■ Voltages from 24 V, different ...

Torque: 21 Nm - 390 Nm

As a positive structure with interlocked rotors and anchor parts, maximum torque is transmitted within a small assembly space. Properties ■ Voltages from 24 V, different voltage (optional) ■ Compact, maintenance-free design ■ Backlash ...

Torque: 6 Nm - 130 Nm

COMBIBOX clutch/brake combinations are designed for joining, separating and holding rotating shafts. The units are constructed in compact aluminium housing and provide an autonomous bearing that can be used between ...

Torque: 400 Nm - 12,000 Nm

SGFUSION-SC SWITCHABLE CLUTCH The SGF switchable clutch is for the connection and disconnection of main and auxiliary drives. The clutches are used in e.g. hybrid applications, test benches and special machines.

Torque: 7 Nm - 3,600 Nm
Rotational speed: 1,800 rpm - 4,200 rpm
Power: 7 W - 150 W

Electromagnetic multi disc clutch with collector ring, rotating magnet Tension 24 V dc – 0 + 15% Application: wet run – dry application in presence of very low rpm only Motion transmitted ...

Torque: 7 Nm - 3,600 Nm
Rotational speed: 1,800 rpm - 4,000 rpm
Power: 13 W - 150 W

Electromagnetic multi disc clutch with collector ring, rotating magnet Tension 24 V dc – 0 + 15% Application: wet run – dry application in presence of very low rpm only Motion transmitted ...

Torque: 22 Nm - 1,800 Nm
Rotational speed: 2,200 rpm - 4,000 rpm
Power: 13 W - 92 W

Electromagnetic multi disc clutch with collector ring and cup housing Tension 24 V dc – 0 + 15% Application: wet run – dry application in presence of very low rpm only Motion transmitted ...

Torque: 500 Nm - 4,000 Nm
Rotational speed: 0 rpm - 2,000 rpm

The EZM electromagnetic tooth clutch is the negative version of the EZN clutch. This clutch allows relatively high rotation speeds at the same time that it transmits ...

Torque: 0 Nm - 6,500 Nm
Rotational speed: 0 rpm - 2,000 rpm

... quick disconnect, without delays or delays in response. Supports large section shafts. The EZN Electromagnetic Tooth Clutch is used in two modes, clutch and declutch: Engaging ...

Torque: 1.5 Nm - 700 Nm
Rotational speed: 1,400 rpm - 10,000 rpm
Power: 8 W - 105 W

The electromagnetic clutch SEE, is basically formed by the inductor core with its corresponding coil, the rotor with the incorporated friction material (which is mounted on the shaft with key) and the ...

Torque: 2.8 Nm - 5.6 Nm
Rotational speed: 1,200 rpm - 3,000 rpm

... combine the high torque capacity of a spring clutch with the convenience and control of a conventional electric clutch. Based on a standard wrap spring clutch, with the added feature ...

Torque: 0.3 Nm - 200 Nm
Power: 6, 8, 10 W

The Electromagnetic Clutches are specifically designed to provide an excellent quality performance and functionality. They are basically constructed for the transmission of the torque. They are also ideally created where ...

Torque: 0 Nm - 3,500 Nm

... Antriebstechnik GmbH provides electromagnetic friction clutch, with maximum braking torque of 3500 Nm. This friction clutch ensures efficiency even for harsh conditions. It can be supplied ...

Torque: 3,200 Nm - 30,000 Nm
Rotational speed: 1,600, 2,000, 2,400 rpm
Power: 288, 167, 84 W

high torque transfer despite compact dimensions special solutions on request positive-locking transmission of torque without slip engageable also at low relative speed high range of temperatures easy control ...

Torque: 3,200 Nm - 30,000 Nm
Rotational speed: 950, 1,150, 1,400 rpm
Power: 90,000, 176,000, 220,000 W

high torque transfer despite compact dimensions special solutions on request positive-locking transmission of torque without slip engageable also at low relative speed high range of temperatures easy control ...

Torque: 20 Nm - 2,200 Nm
Rotational speed: 1,500 rpm - 4,800 rpm
Power: 13 W - 114 W

high torque transfer despite compact dimensions special solutions on request positive-locking transmission of torque without slip engageable also at low relative speed high range of temperatures easy control ...