Flow: 2.1 m³/h - 10.5 m³/h
Pressure: 400 bar - 1,850 bar
Power: 132 kW - 250 kW
... surface cleaning, coal mine, etc. The Electric High Pressure Plunger Pump is a cutting-edge device designed to meet the demanding requirements of various industries. This pump combines advanced technology with high-performance ...
Flow: 0.3 m³/h - 90 m³/h
Power: 0.55 kW - 37 kW
... VISCOSITY MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, driving ...
Flow: 3 m³/h - 90 m³/h
Pressure: 0.85 bar
Head: 10 m - 80 m
... The sine
pump is composed of special rotors and is used for transporting high-viscosity materials with easily granular components, such as yogurt with fruit pulp, granular sauces, and so on.
A gate functions as a seal between the inlet ...
... variants
- VP-220 UC — Type: 3 ph; Pump absorbed power (P2) 50Hz / 60Hz: 0.14 / 0.21 kW; 50/60Hz dual: STD; DN (BSPP): 1/4; Qmax 50Hz: 11 l/min; Hmax 50Hz: 38 m.
- VPm-220 UC — Type: 1 ph; Pump absorbed
Flow: 207 m³/h
Head: 12.1 m
Power: 10 kW - 11.6 kW
... Submersible centrifugal pump with dry motor in IE3 class, high efficiency multi-channel impeller with self-cleaning profile, suction flange with anti-clogging device ...
FAGGIOLATI PUMPS
Flow: 338.5 m³/h
Head: 24.6 m
Power: 36 kW - 39.1 kW
... Submersible centrifugal pump with dry motor in IE3 class, high efficiency multi-channel impeller with self-cleaning profile, suction flange with anti-clogging device ...
FAGGIOLATI PUMPS
Flow: 324 m³/h
Head: 23 m
Power: 33 kW - 35.5 kW
... Submersible centrifugal pump with dry motor in IE3 class, high efficiency multi-channel impeller with self-cleaning profile, suction flange with anti-clogging device ...
FAGGIOLATI PUMPS
Flow: 0 m³/h - 28.5 m³/h
Head: 1 m - 19 m
Power: 0.75, 1.1, 3, 4 kW
... CTP PLASTIC PUMPS COMPACT AND RELIABLE MECHANICALLY SEALED PUMP The CTP pumps are semi open single stage centrifugal pumps. Since there are no metal parts on the ...
Flow: max 125.0 m³/h
Pressure: 32, 100 bar
Head: max 88.0 m
... Inverter allows full control over the operation of the pump by influencing motor speed. Changing motor speed affects the pumping parameters. Industrial flanged connections The industrial CTX I pumps ...
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve. ...
Srl
Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve. ...
Srl
Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve. ...
Srl
Flow: 500 m³/h
Pressure: 10, 16 bar
Head: 100 m
... Hot Oil Pump Hot oil pumps are specially designed to transport liquids at high temperatures. They are commonly used in industrial processes, heat transfer systems, and energy production. These pumps ...
EMSE POMPA
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar
... pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit. Benefits and Characteristics optionally with ...
WANGEN PUMPS
Flow: 0 m³/h - 280 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m
... duty seal-less closed coupled magnetic drive horizontal centrifugal pump to ISO 5199 and ISO 2858 /EN 22858 100% leak free Long life cycle, reduced maintenance costs Flanges according to ISO 7005 PN 16 ...
Johnson Pump
Flow: 580 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
... Diaphragm pump in aluminum series AABM-2 modular with 2" flanges, membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK AND INDUSTRIAL ...
Flow: 1 l/min - 1,300 l/min
Head: 0 m - 120 m
Power: 0.75 kW - 15 kW
... MP series belongs to the compact standard centrifugal pumps and is characterized by the sealless, corrosion-resistant and leak-free construction. The low-wear SIC-D bearings ensure reliability and maintenance-freedom. ...
IWAKI Europe GmbH
Flow: 30 l/h - 6,000 l/h
Pressure: 0 bar - 250 bar
Power: 1.5 kW - 5.5 kW
... CEREX D metering pump, its double diaphragm design, combined with built-in failure detection, delivers superior leak prevention performance compared to single diaphragm pumps with a similar price point. In addition, the ...
Flow: 0 us gal/min - 200 us gal/min
Pressure: 8.6 bar
Head: 88 m
... valve pump is ideally suited for a variety of food and beverage processing, pharmaceutical and cosmetic industry applications. Part of the SANDPIPER T-Series family of FDA pumps, it provides a bolted, leak-resistant ...
Flow: 130 l/s
Head: 110 m
... MEC AG SINGLE-STAGE FLANGED PUMPS FOR DIESEL ENGINES Horizontal single-stage flanged centrifugal pumps for direct coupling to endothermic engines. Such machines are used in pivot systems, ...
Flow: 4.5 l/min
... stages multiple pumps with reduced axial length; upon request and after verification of the functioning cycle and operating conditions those pumps can be eventually provided with more than three stages. AIPC J ore pumps ...
Flow: 0 m³/h - 68 m³/h
Pressure: 0 bar - 6 bar
Head: 0 m - 35 m
... Plastic and Fluoroplastic Lined Magnetic drive Horizontal Centrifugal pumps Sub-ISO designed. Lining: PP (Polypropylene), ETFE (Ethylene tetrafluoroethylene) Close-coupled execution Versatility: lthe ETN EVO offers a wide range ...
CDR Pompe
Flow: 0 m³/h - 39 m³/h
Pressure: 0 bar - 6 bar
Head: 0 m - 52 m
... Centrifugal Pumps SGT Model:SGT The following is about Centrifugal Pumps SGT related SGT, I hope to help you better understand Centrifugal Pumps SGT. Centrifugal Pumps SGT Application ...
Shimge Pump Industry (Zhejiang) Co.,Ltd
Pressure: 16 bar
... Maximum reliability, as the pump does not require O-rings Specifications •Design - Long life grease or oil bath lubrication •Nominal Pressure - PN16 •Lining - PFA •Housing Material - EN-JS 1049 / ASTM A 395 • Flanges ...
Richter Chemie Technik
Flow: 0 m³/h - 850 m³/h
Pressure: 60 bar
Head: 0 m - 850 m
... FEATURES • CD for fire applications • RKB for industrial applications • Mechanical seal or gland packed • Suction flange oriented left or right • Vertical mounting • Low NPSH • Available as a canned or vertical turbine type ...
SPP Pumps
Flow: 65 m³/h
Head: 29 m
Power: 4, 5.5, 7.5 kW
... Standard Package Protective polyurethane foam wrapping in a wooden crate FLANGE KIT (DIN standard – ANSI available on request) – Flange suction 3″ (DN 80) m – Flange delivery 2″1/2 (DN 65) f ...
DEBEM SRL
Flow: 22 l/min
Pressure: 20 bar
Head: 0 m - 30 m
... Ideal for using at small and average-sized construction sites. Direct filling from silo: The PFT G 4 mixing pump is designed according to the modular design principle. By using the PFT delivers hood, it can easily ...
Flow: 6.8 m³/h - 114 m³/h
Pressure: 14 bar
Fluid temperature: -29 °C - 205 °C
... The 4223AX Series™ internal gear pump is the ideal solution for crude oils (light, heavy, and sour), fuel oils, petrochemicals, and more. It comes with API 682 Category 1, 2 or 3 cartridge seals with optional API seal support plans. Features ...
Viking Pump
Flow: 3.2 m³/h - 1,500 m³/h
Head: 5 m - 80 m
Power: 1.1 kW - 400 kW
... dismantling. The gliding bearing can be lubricated by cooling water or self-cooling lubricated; The outlet flange is flexible half symmetric flange which is easy to be connected. Extended suction pipe can be ...
Shanghai Apollo Machinery Co., Ltd
Flow: 120, 144, 110, 170 l/min
Power: 16, 7.5 kW
... for solid performance in a compact silo mixer pump Used by satisfied MAI customers in the dry mortar industry for many years thanks to its proven technology and low maintenance. The MAI® COMP is a compact ...
Flow: 140 us gal/min
Head: 16.8 m
... KEY FEATURES Space-Saving Pump Design. No Maintenance with Enlarged Motor Bearings with High Temperature Lubrication. Universal Flange to Flange Dimensions Makes Replacement Faster and Cost Less. Quieter ...
the best suppliers