DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... EXCESSIVE FLOW VALVE The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow ...
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
... FLOW CONTROL VALVE The valve controls downstream flow to a pre-set and constant value in order to limit water consumptions and preserve pipeline fill ...
DN: 80 mm - 300 mm
Pressure: 1 bar - 16 bar
Flow rate: 10 m³/h - 1,600 m³/h
... The valve controls downstream flow to a pre-set and constant value in order to limit water consumptions and preserve pipeline fill rate or to set a maximum demand value. The valve is ...
DN: 10 mm - 100 mm
Pressure: 40 bar
Temperature: -20 °C - 110 °C
... activate the valve in case of emergency or black-out (not available for 4 and 12-second version). • - One additcnal opening feedback microswitch (free contact diverter). Example of use: notification of opening. pump relay actuation, ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
... precise control of the flow rate through concentric Iris® diaphragms (similar to a camera diaphragm). - Energy-saving and low-noise control valve due to its free centric passage. - ...
Pressure: 7 bar
Temperature: -10 °C - 100 °C
Flow rate: 0 l/min - 250 l/min
... binary solenoid
control and high-end servo
valves, offering precise
control with simplified installation and tuning for compact medical equipment.
Main Features
- Infinite positioning:
Weilong Intelligent Technology (Dongguan) Co., Ltd.
DN: 2 mm - 4 mm
Pressure: 0 bar - 1 bar
Temperature: -20 °C - 65 °C
... Product Overview
The WL-0838 medical pinch
valve is a precision tubing pinch
valve engineered for sterile, contamination-free handling of liquids in medical and laboratory equipment. The
valve ...
Weilong Intelligent Technology (Dongguan) Co., Ltd.
Pressure: 0.2 bar - 8 bar
Temperature: 1 °C - 75 °C
Flow rate: 12, 17, 35 l/min
...
Troubleshooting (common issues & remedies)
- No water flow: check supply valve, inlet filter and system pressure.
- Continuous flow: inspect and replace diaphragm/seal,
Weilong Intelligent Technology (Dongguan) Co., Ltd.
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 345 bar
Temperature: -54 °C - 232 °C
... Overview
Precision needle
valve designed for high-purity natural gas
flow
control in high-pressure systems. Compact, panel-mountable unit available in straight, angle and cross
flow ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 206.8 bar
... Pneumatic Diaphragm
Valve HD Series — 316L Stainless Steel, High-Purity, High-Pressure for Laboratory Specialty Gases
Product Application and Purpose
The HD Series pneumatic diaphragm
valve provides ...
DN: 0 mm - 10,000 mm
... LD SERIES
LOW-PRESSURE MANUAL DIAPHRAGM VALVE
Overview
Manual low-pressure diaphragm
valve designed
for control of high-purity and ultra-high-purity gases in semiconductor, ...
DN: 6, 8 mm
... Pinch valves for tubing-based flow control, available with solenoid, pneumatic and proportional (stepper motor) actuation. Non-contact design isolates the media from the actuator, making these valves ...
DN: 0 mm - 10,000 mm
Pressure: -1 bar - 20 bar
Flow rate: 18 l/min - 5,000 l/min
... Overview
FC Series stepper-controlled proportional needle
valves for high-precision liquid and gas
flow
control. Repeatability up to ±0.1% F.S.
Control inputs: 0–10V, 4–20mA or ...
DN: 0 mm - 10,000 mm
Pressure: 20,000 psi
... Product overview
The Hiflux ball-med-20k is a high-pressure ball
valve engineered for industrial systems requiring reliable shut-off and accurate
flow
control. Suitable for both liquids and ...
DN: 1 in - 16 in
Pressure: 0 bar - 15 bar
... High-Rise Plumbing Type - Pressure Reducing Valve, Pressure Relief valve, Float Valve, Altitude Control Valve, Rate of Flow Control ...
DN: 1 in - 16 in
Pressure: 1 bar - 10 bar
... High-Rise Plumbing Type - Pressure Reducing Valve, Pressure Relief valve, Float Valve, Altitude Control Valve, Rate of Flow Control ...
DN: 1 in - 16 in
Pressure: 0 bar - 10 bar
... High-Rise Plumbing Type - Pressure Reducing Valve, Pressure Relief valve, Float Valve, Altitude Control Valve, Rate of Flow Control ...
DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
... device between stem and ball, and stem and body
Applications
- Process automation and control systems
- Oil
DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C
... The PJF Series Angle Seat Valve is designed for optimal flow control in industrial applications. It features a robust construction that ensures durability and reliability in demanding environments. The ...
DN: 10 mm - 200 mm
Pressure: 16, 25, 40 bar
Temperature: -20 °C - 180 °C
... The pneumatic ball valve is designed for efficient flow control in various industrial applications. It features a robust construction that ensures durability and reliability. The valve ...
DN: 50 mm - 10,000 mm
Pressure: 10, 16, 6 bar
Temperature: -30 °C - 750 °C
... of media such as air or process gas. Its welded construction gives full freedom of customization and allows building the valves in the most accurate way to withstand the harshest process conditions. For special high temperature ...
Flowrates
DN: 50 mm - 2,000 mm
Pressure: 6, 10, 16 bar
Temperature: -30 °C - 750 °C
... damper valves type GDV and GDV-T serve mainly for the shut-off and/or flow regulation of different media such as air or process gas. The construction varies from, welded construction to divided structures for bigger ...
Flowrates
DN: 50 mm - 5,000 mm
Pressure: 6, 10, 16 bar
Temperature: -30 °C - 750 °C
... process gas. Their primary function is on/off shut-off and/or flow regulation for process air or gas. Its welded construction gives full freedom of customization and allows building the valves in the most accurate ...
Flowrates
DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... Use To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DIVATEC,SL
DN: 10 mm - 100 mm
Pressure: 16, 10 bar
Temperature: -20 °C - 120 °C
... connections • Pneumatic actuator DA, NO, NC or with electric motor 230V / 24V • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible ...
DIVATEC,SL
DN: 10 mm - 100 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... remove 4 screws • Box with two end of career – Electromechanical – Proximity NAMUR – PNP Proximity • Pilot Solenoid Valve 3/ 2 and 5/2 way • Robust pneumatic actuator ...
DIVATEC,SL
Flow rate: 23.7 l/min
... Model SP248 chrome-plated brass stay-open valve with squeeze lever handle and built-in 6.25 gpm (23.7 L) flow control. 1/2" IPS inlet x 1/4" IPS outlet. ...
DN: 0.5 in - 8 in
... reduced bore valves in ANSI Class 150 and ANSI Class 300. Habonim’s flanged valves offer tight shutoff, long service life and high durability with exceptional performance in many service applications under the most sever ...
HABONIM
DN: 0.5 in
Pressure: 13.8 bar
Temperature: 198 °C
... through thermal conduction to modulate the valve open/closed and regulate the flow of cooling media. Typical Applications These compact self-contained sample cooler control valves ...
DN: 0.5 in - 1.25 in
Pressure: 2.5 MPa
Temperature: -10 °C - 110 °C
... . Flow presetting, pressure-independent balancing and electric control:three in one function. Free maximum flow setting, for more accurate control. No need to change the fixed ...
Taloar
DN: 6 mm - 50 mm
... quality and value in engineered solutions for your unique flow- control needs. Providing products from standard forged valves to the most innovative block technology, each and every Pure-Flo valve ...
AERRE INOX Srl
DN: 0.15 mm - 1.6 mm
Pressure: 0.4, 0.7, 1 MPa
Temperature: -40 °C - 70 °C
... The PV02 series proportional valve by Keyto offers precise gas flow control with a flow path diameter range of 0.15mm to 1.6mm. It adjusts gas flow rate proportional ...
Keyto Fluid Technology
DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar
... Product! Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow ...
Cross Manufacturing
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an additional back flow preventer ...
A. u. K. Müller
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... degree) or 90 degree flow patterns Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve ...
DN: 50 mm - 1,400 mm
Pressure: 20 bar - 420 bar
Temperature: -46 °C - 190 °C
... and improve profitability CAMERON T30 Series fully welded ball valves reduce the total cost of ownership by minimizing fugitive emissions, simplifying maintenance, and eliminating valve replacement or upgrading at ...
Pressure: 15 bar
Flow rate: 1.6 l/min
... The adjusting valve is built into a junction, which is produced from an extruded light alloy aluminium bar. The device (quite simple and cheap) is particularly suitable for the distribution of oil in lubricating systems. For special ...
... Stack the odds in your favor with flow, check and pressure controls Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, ...
DN: 0.5 in - 4 in
Pressure: 150 psi
Temperature: 73 °F - 180 °F
... Chemtrol® valves for the most reliable, versatile and economical valve option in commercial and industrial applications. Chemtrol® ball valves are backed by a 1-year limited warranty. Because Chemtrol® ...
the best suppliers