Gas heaters

Power: 3,000 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... industrial hot air device type 3000-E is the optimal air heater for production processes. Our air heaters are durable and suitable for continuous operation, ...

Power: 1,800, 2,400, 3,000, 3,600 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... Type 3000 industrial air heater produces constant hot air in continuous operation. Despite providing strong hot air performance, the small and lightweight air ...

Power: 3,000, 5,000, 5,100, 6,000, 7,500 W
Temperature: 20 °C - 700 °C
Pressure: max 1.0 bar

The industrial air heater type 5000 continuously produces hot air at a constant temperature. The compact and lightweight air heater enables integration ...

ATTSU RVE Electric superheated steam heater ATTSU RVE Electric superheated steam heater is used in certain processes which require superheated steam, therefore steam boilers are equipped with steam superheaters ...

Power: 250 W - 8,000 W
Temperature: 350, 100 °C

Watlow’s new FLUENT in-line heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around ...

Power: 1,000 W
Temperature: 200 °C

WATROD enclosure heaters are designed to prevent freezing and condensation in electrical and mechanical housings. The WATROD heater element is enclosed in a perforated, aluminized-steel bracket to prevent ...

Power: 6 kW - 60 kW
Temperature: 1,020 °C

Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted ...

Power: 235 W - 800 W

PTC heater with fan, continuous thermal output 235 - 800 W, and quick-connect terminal.

Power: 8 W - 150 W

PTC heater without fan, continuous thermal output 10 - 150 W, with quick-connection terminal.

Power: 500 W - 6,000 W

... to help protect your liquid and processes. Screw Plug industrial heaters from WATTCO™ are used for heating gases and liquids in tanks or vessels. These submersible heating elements ...

Power: 0 kW - 750 kW

... transfer to any medium. Types of Immersion Heaters WATTCO manufactures a variety of immersion heaters including flanged immersion heaters, circulation heaters, inline ...

Power: 23 kW

The use of heaters has continued to grow. Duct Heaters have been an integral part of the heater industry garnering considerable revenue from their sales. Duct Heaters ...

Power: 5, 9 W
Temperature: -45 °C - 70 °C

... SEMICONDUCTOR HEATER RCE 016 | 5W, 9W - Wide voltage range - Dynamic heating up - Energy saving - Compact Small heaters designed to prevent condensation and to ensure a minimum ...

Power: 18 kW - 35,000 kW
Temperature: 50 °C - 950 °C
Pressure: 0 bar - 200 bar

... OSRAM Heaters, Sylvania Air Heaters, OSRAM Process Heat, Process Heat, Process Air Heaters, Air Heaters, Industrial ...

Power: 0 kW - 8 kW
Temperature: 0 °F - 1,500 °F
Pressure: 0 psi - 25 psi

The Serpentine Triple Pass heaters are modular field replaceable air heater products commonly used in OEM applications. The popular air heater element ...

Power: 0 W - 24,000 W
Temperature: 0 °C - 900 °C
Pressure: 0 bar - 10 bar

... Process Heat, Process Air Heaters, Air Heaters, Industrial Air Heaters, High temperature heaters, High pressure heaters, ...

The small dimensions of the gas-tight air heater enables space-saving installation. If one or several heaters are connected to the compressed air network, you will receive ...

Power: 0 kW - 2 kW
Temperature: 650 °C
Pressure: 0 bar - 6 bar

Housing made from stainless steel; connection chromedbrass Length of the connection cable and thermocouple line 1,5 mtr. Air hose available per meter Other voltage available on request 24 month warranty (except wear parts)

Power: 0 kW - 1 kW
Temperature: 0 °C - 600 °C

... despite air hose with internal connection line. The perfect device for confined spaces and installation positions. Voltage [VAC] - 230 Frequency [hz] - 50/60 Power [KW] - 0,435 - 0,8 Current [A] - 1,9-3,5 max. ...

Power: 3 kW - 30 kW

Explosion protected air heaters are used for air heating in hazardous areas zone 1 or 2. A heating coil and ventilator both of explosion proof design ...

Power: 500 W - 2,500 W

Room heater for operation in dust hazardous areas.

According to the application, a flow monitor can be necessary to prevent the heater from overheating Specific surface load The specific surface load is a measure for the heat transfer onto the heated medium. It must ...

Power: 80 kW - 300 kW

Radiant heaters that have the possibility to install the burner and the gas network outdoor. This avoid hole in the roof and the ordinary maintenance is carried out outside the building ...

Power: 136 kW - 225 kW
Pressure: 250 Pa - 400 Pa

... • Flue gas exhaust • Separate Riello oil burner • Summer-Winter switch for ventilation only • Electronic flame control with photocell • Fan-Limit thermostat with automatic reset • Limit thermostat ...

Master gas heaters provide large volumes of instant heat. They are very cost effective, robust and efficient. Portable gas heaters are best for well ventilated areas ...

Indirect oil heater MASTER BV 500 with separate Riello Burner Heating Power - 150 kW Main features: *Clean hot air *Powerful centrifugal fan *Low noise ...

Power: min 90.0 W
Temperature: min 20.0 °C

Many power, voltage, material and control options available. All products manufactured to short lead-times. Indoor and Outdoor styles. Can be designed to meet UL/CSA standards, ATEX, IECEx etc. For more information contact LMK Thermosafe

Power: 0 kW - 75 kW
Temperature: 0 °C - 400 °C
Pressure: 0 bar - 25 bar

... circulation heaters. Vulcanic screw plug heaters comprise a very compact bundle of pin heating elements available in several materials compatible with the fluids to be heated (steel, ...

Power: 0 kW - 75 kW
Temperature: 0 °C - 400 °C
Pressure: 0 bar - 25 bar

Screw plug heaters can be equipped with control and safety devices (thermostats, Pt100 sensor, thermocouples, etc.) for the measurement of the temperature in the fluid or of the heating elements. An ...

Power: 3,000, 2,000, 1,000, 500, 5,500 W
Temperature: 200, 140, 350 °C
Pressure: 0 bar - 10 bar

... oil, as well as air or gases in general at up to 15 bar max. They are fitted with a screw plug immersion heater and a safety thermostat. Fluid circulation heaters can be connected hydraulically ...

... Water, Oil, Grease >> Steel - Alkaline cleaning solutions, Tars, Asphalt or air heating >> Stainless Steel - Corrosive liquids, food processing equipment, Radiant heating >> ...

Power: 2,000 kW

Duct heaters are heat transferring devices which are an assembly of heating elements mounted in a frame or duct. Preferably used for non-pressurized air-heating systems, there are three types of duct ...

Finned tubular heaters are widely used in application which requires forced convective heating of air or gases at low to medium temperatures. Heaters are made up of tubular ...

... block. Since the fan is connected separately, this can also be operated independently of the heating element for air circulation. Our ESH enclosure heaters can also be used for other ...

... designed for duct system heating application in industrial hazardous areas with potentially explosive gas and/or dust. The heat resource is electric resistance wire (solid). The heating ...

Power: 3 kW - 18 kW

For heating small to medium-sized rooms, and as frost protection guards, the portable Kroll electric heaters are the ideal solution. The smaller models are also perfect supplementary heaters ...

Power: 13 kW - 65 kW

Kroll's air heaters of the LH series are truly multi-talented in heat and air distribution - whether heating or ventilating, outdoor, mixed air or ...

Power: 10 kW - 84 kW

Gas heaters designed for indoor installation, available in three models with heating capacity from 9.4 to 75.6 kW. Thanks to a wide range of products (the heater is ...

The air duct heaters recognized for their robustness are connected to ventilation shaft to heat industrial premises. The air duct heaters for circular or rectungular duct are made up of one or several ...

Power: 18 kW - 200 kW

Electric air duct heaters are commonly used to heat air or gas up to a temperature of 850 ° C in drying, dehydration, air treatment application ... under low pressure. Industrial ...