Heaters

Power: 3,000 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... optimal air heater for production processes. Our air heaters are durable and suitable for continuous operation, for example in production machines. There are two versions of the air heater ...

Power: 1,800, 2,400, 3,000, 3,600 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... 3000 industrial air heater produces constant hot air in continuous operation. Despite providing strong hot air performance, the small and lightweight air heater enables integration into expert production ...

Power: 3,000, 5,000, 5,100, 6,000, 7,500 W
Temperature: 20 °C - 700 °C
Pressure: max 1.0 bar

... industrial air heater type 5000 continuously produces hot air at a constant temperature. The compact and lightweight air heater enables integration into professional production processes despite its high ...

ATTSU RVE Electric superheated steam heater ATTSU RVE Electric superheated steam heater is used in certain processes which require superheated steam, therefore steam boilers are equipped with steam superheaters ...

Power: 250 W - 8,000 W
Temperature: 350, 100 °C

Watlow’s new FLUENT in-line heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around ...

Power: 1,000 W
Temperature: 200 °C

WATROD enclosure heaters are designed to prevent freezing and condensation in electrical and mechanical housings. The WATROD heater element is enclosed in a perforated, aluminized-steel bracket to prevent ...

Power: 6 kW - 60 kW
Temperature: 1,020 °C

Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted ...

Power: 235 W - 800 W

PTC heater with fan, continuous thermal output 235 - 800 W, and quick-connect terminal.

Power: 8 W - 150 W

PTC heater without fan, continuous thermal output 10 - 150 W, with quick-connection terminal.

Power: 20 W - 40 W

Compact heater for the protection of electrical and electronic components in enclosures. Its design ensures great convection resulting in excellent heat dissipation. A touch-safe plastic cover provides for low surface ...

Power: 10 W - 50 W
Temperature: -45 °C - 70 °C

Compact heater with PTC heating elements for heating enclosures with electrical or electronic components. The heater prevents too low temperatures and thus condensation ...

Power: 50 W - 150 W
Temperature: -45 °C - 70 °C

Compact loop heater for heating enclosures with electrical and electronic components. Its design ensures great convection resulting in excellent heat dissipation. Touch-safe plastic housing minimises ...

Power: 350, 700 W
Temperature: 80 °C

These types of contact heaters have been designed and manufactured for preheating and maintaining the oil temperature constant in air-cooled endothermic engines. They are in fact applied in contact under the oil sump. ...

Power: 80, 90 W
Temperature: 80 °C

These types of contact heaters have been designed and manufactured for preheating and maintaining the oil temperature constant in air-cooled endothermic engines. They are in fact applied in contact under the oil sump. ...

Power: 500 W - 15,000 W
Temperature: -10 °C - 80 °C

... passage of the device. We offer two types of immersion heaters: Our A-mounted immersion heater which is particularly suitable up to 6 kW. Standard configuration: Teflon® FEP insulated heating ...

Power: 1 kW - 15 kW

... , FEP or stainless steel frame Standard configuration : heating cable coated Teflon® FEP and metallic frame coated PP or PVDF. For use with feet at the bottom of the tank. Available for heaters with ...

Power: 1 kW - 15 kW

... With a PVDF or PP fixing bracket to secure the heater on the side. Recommended up to 6 kW. Assembly type B On metallic frame coated PP, PVDF, FEP or stainless steel frame Standard configuration : heating ...

Power: 500 W - 6,000 W

... to help protect your liquid and processes. Screw Plug industrial heaters from WATTCO™ are used for heating gases and liquids in tanks or vessels. These submersible heating elements ...

Circulation Heaters, also known as “in line heaters,” have uses in many applications. They can use steel, stainless steel, or titanium depending on the application. Lube oil and waste oil applications ...

Power: 0 kW - 750 kW

... transfer to any medium. Types of Immersion Heaters WATTCO manufactures a variety of immersion heaters including flanged immersion heaters, circulation heaters, inline ...

Power: 5, 9 W
Temperature: -45 °C - 70 °C

... SEMICONDUCTOR HEATER RCE 016 | 5W, 9W - Wide voltage range - Dynamic heating up - Energy saving - Compact Small heaters designed to prevent condensation and to ensure a minimum ...

Power: 3 kW - 30 kW

Explosion protected air heaters are used for air heating in hazardous areas zone 1 or 2. A heating coil and ventilator both of explosion proof design are installed in a duct shaped housing. in ...

Heaters with a bundle of tubular heating elements or cartridge type with withdrawable heating insets. Flameproof heater enclosure made of cast iron, carbon steel with ...

... d or de IIB + H2 Heater for fluids type DHF..C.. Heater for gas type DHG..C.. Flameproof enclosure, welded type made of carbon steel or stainless steel, with built-in temperature limiter and monitor ...

Temperature: 500 °C

Chip heaters made of silicon nitride are normally rectangular. Various dimensions and batch sizes up to our die diameter of 400 mm can be produced. The special properties and the low mass of ceramic allow fast heating ...

Power: 80 kW - 300 kW

Radiant heaters that have the possibility to install the burner and the gas network outdoor. This avoid hole in the roof and the ordinary maintenance is carried out outside the building without interrupting the company ...

Power: 1 kW - 6 kW
Temperature: 0 °C - 280 °C

... Internal insulation in micanite • - Resistive wire* internal insulating Additional information Applications - SOLID heating Areas of use - Agriculture, Food, Industrial

Power: 0 kW - 10,000 kW
Temperature: 340 °C
Pressure: 0 bar - 15 bar

Pirobloc designs, manufactures and installs customized suction heaters based on the needs of each customer and project. Our suction heaters are supplied with all nozzles for the thermal fluid inlet ...

Power: 136 kW - 225 kW
Pressure: 250 Pa - 400 Pa

... flame control with photocell • Fan-Limit thermostat with automatic reset • Limit thermostat with manual reset • Fuel pre-heater • Two oil filters: oil pump filter and suction filter • Quick connector to external ...

Power: 9 kW
Temperature: 20 °C - 60 °C

Model description • Compact and lightweight (35 kg) • It delivers 1.400 m3/h of hot air using only 9 kW at 380 V (three phase) • Connection to an external digital remote thermostat THK, specific for this application, included ...

Power: 111, 44, 20, 48 kW

Master direct oil heaters are highly efficient devices that provide large volumes of instant heat where it is required. They are best for open or well ventilated areas like factories, warehouses or construction sites. ...

Power: 0 kW - 2 kW
Temperature: 650 °C
Pressure: 0 bar - 6 bar

Housing made from stainless steel; connection chromedbrass Length of the connection cable and thermocouple line 1,5 mtr. Air hose available per meter Other voltage available on request 24 month warranty (except wear parts)

Power: 0 kW - 1 kW
Temperature: 0 °C - 600 °C

The short one for direct installation! With mounting thread directly in the housing. Smallest installation height despite air hose with internal connection line. The perfect device for confined spaces and installation positions. Voltage ...

Power: 0 kW - 1 kW
Temperature: 600 °C

Different voltages, power and special versions, such as external activation via controller or SPS possible. Available on request!!! Special accessories on request!!! - 24 month warranty (except wear parts) Voltage [VAC] ...

... while heating enables pumps and stirrers to be easily employed. The Thermosafe is IP66 rated, so can be hosed down, even when operational, in complete safety. For more informations about the THERMOSAFE® Induction Heater ...

... container heating products. Our steadfast THERMOSAFE® Induction Heater has dominated the market for 30 years and is still the safest, most efficient and most reliable drum heater in ...

Power: min 90.0 W
Temperature: min 20.0 °C

Many power, voltage, material and control options available. All products manufactured to short lead-times. Indoor and Outdoor styles. Can be designed to meet UL/CSA standards, ATEX, IECEx etc. For more information contact LMK Thermosafe

Power: 0 kW - 75 kW
Temperature: 0 °C - 400 °C
Pressure: 0 bar - 25 bar

... circulation heaters. Vulcanic screw plug heaters comprise a very compact bundle of pin heating elements available in several materials compatible with the fluids to be heated (steel, ...

Power: 0 kW - 75 kW
Temperature: 0 °C - 400 °C
Pressure: 0 bar - 25 bar

Screw plug heaters can be equipped with control and safety devices (thermostats, Pt100 sensor, thermocouples, etc.) for the measurement of the temperature in the fluid or of the heating elements. An ...

Power: 1 kW - 12 kW
Temperature: 100 °C

... for frost protection and made of fluoropolymer, the circular heaters allows heating or maintenance of temperature of corrosive chemical baths in storage tanks. The flexible heating element ...

Known for its versatility , ruggedness and dependability , tubular heaters can virtually be factory-configured to suit a variety of industrial heating applications. Sheath Material : Copper, Steel, ...

Power: 2,000 kW

Duct heaters are heat transferring devices which are an assembly of heating elements mounted in a frame or duct. Preferably used for non-pressurized air-heating systems, there are three types of duct ...

... such that direct immersion heaters cannot be installed, portability is required, heaters are to be removed without emptying the tanks, or when there is no access to the liquid medium except from the top, ...

Circulation heaters are made of a steel or stainless steel vessel equipped with 3 nozzles (input-output) and with an immersion heater (generally threaded) equipped with space to add a control device temperature. The ...

Power: 18 kW - 200 kW

Electric air duct heaters are commonly used to heat air or gas up to a temperature of 850 ° C in drying, dehydration, air treatment application ... under low pressure. Industrial air duct heating elements ...

... immersion heater is made up of 3 or 6 tubular heating element sgenerally mounted in a circle, brazed or welded to a brass, steel or stainless steel screw plug. The watt density and the various type of ...

... The SADH flameproof air duct heater is designed for duct system heating application in industrial hazardous areas with potentially explosive gas and/or dust. The heat resource is electric resistance wire ...