Gas heater DSR 6 LCD / Plus

natural gashigh-temperaturefor frost protection

Daygas brings together efficient, economical, quality and functional products that prioritize innovation and R&D, thus saving energy in the heating sector for end consumers. - Power: 6 kW - Short start-up and thermal effect. - Possibility of operation in 2 steps and 5 steps with remote control. - Thanks to the separator cap, heated air is projected forward, allowing installation closer to the ceiling. - Step display and manual control option on the display screen. - Special color options resistant to temperatures up to 1300°C. - Regional temperature control installation. - Energy saving. - High level of safety. Safe gas valve system. - Low energy consumption. - Simple service and assembly. - Frost protection. Capacity: 6kW Gas Consumption: NG 0.57m³ / LPG 0.42kg/h Dimensions: 270h / 780L / 225w Weight: Net 16.40kg / Gross 17.8kg Operating Pressure: 21-55mbar NG / 32-55mbar LPG Heating Area: min 7.65m² / avg 12.75m² / max 17m² Step: Standard 2 / Plus 5 Ceramic Plate: 4 pcs Electrical Connection: 230-240VAC 50-60Hz +/-15% Gas Connection: G ¾ Installation Height: 180 – 300cm Product Features: - Special design with high heat capacity Daygas ceramic stone, effective and economical power for local heating solutions. - Sun technology. - All metal components are resistant to high temperatures and durable. - All electrical components are made of non-flammable silicone cables with high heat resistance. Ceramic Stones: Daygas ceramic radiant devices use special edition Daygas ceramic stones. The radiant wavelength must be in the infrared. The surface of the ceramic stone radiates according to the desired conditions, so the choice and quality of the stone are very important. Control Device: Various scenarios and control elements are available for device control, including: - Remote control. - Pako switched manual control. - Integration via control card. - Automatic thermostat control. - Integration into automation system (SCADA control). The variety of control scenarios offered as 5 different alternatives allows proper and appropriate management of the products. The most suitable control scenario is chosen by evaluating the on-site use of the devices and site conditions. Proper control with the right solution scenario facilitates both fuel savings and long-term trouble-free service. Automation System Integration (SCADA Control): Devices can be integrated directly into building automation systems (BMS) via Modbus communication protocol through the RS485 port (internal), or if no BMS is available, devices can be fully automatically controlled from a single center via an HMI touch screen or PC. - Device operation scheduling by days and hours. - View error codes and identify problematic devices. - Step and regional/individual modulation control of heating devices. - Functional controls such as instant, daily, weekly, or monthly fuel consumption monitoring. Control Panel: - Password protection. - 24/7 programmable function. - 128 x 64 graphic LCD screen. - Heat retention mode. - Frost protection device. - Computer communication port. - Automatic and manual control options. - External temperature sensor connection. - Ability to control 8 independent zones and up to 32 devices in total. Makes your work easier with many commands, from turning devices on and off on working days and at desired time intervals, to keeping the environment warm within the set temperature range for frost protection when the business is closed. Analog Thermostat: The Daygas analog thermostat automatically turns off the device when the set temperature is reached, then when the ambient temperature drops below the desired value, the device automatically switches on at the maximum level and starts working again, saving fuel. Temperature Sensor: - Frost protection mode. - Modulation control capability. - Temperature adjustment via the device. When your devices approach the programmed temperature with the Daygas temperature sensor, it saves fuel by reducing the modulation value of the device according to weather conditions. When the environment reaches the desired temperature, the device turns off automatically, then when it falls below the desired value, the device automatically turns on at the most appropriate temperature level for the environment and starts working again. Pako Switched Manual Control: With the Pako switched control, manual step adjustment can be provided on the Pako. For more local solutions where there is no control panel or it is not necessary, devices can be operated at the desired level via the Pako switch. Heating elements can be controlled with independent step adjustment. Since the device is not powered in standby (0) position on the Pako, the device to be turned off goes to sleep after shutdown procedures, thus ensuring the longevity of the devices. Remote Control: Daygas remote controls are easy-to-use control devices with 3 buttons and simple functions. With the Daygas remote control, all device functions such as on/off, heat adjustment, and reset can be easily controlled. All Daygas products can be controlled remotely with a single remote. - Frost protection mode. - Modulation control capability. - Temperature adjustment via the device. Technical Specifications: - Power: 6 kW - Gas Consumption: NG 0.57m³/h, LPG 0.42kg/h - Dimensions: 270h / 780L / 225w (mm) - Weight: Net 16.40kg / Gross 17.8kg - Operating Pressure: 21-55mbar NG / 32-55mbar LPG - Heating Area: min 7.65m² / avg 12.75m² / max 17m² - Step: Standard 2 / Plus 5 - Ceramic Plate: 4 pcs - Electrical Connection: 230-240VAC 50-60Hz +/-15% - Gas Connection: G ¾ - Installation Height: 180 – 300cm