Gas radiant heater DSR 12 LCD / Plus

single-phaseACelectric

Daygas brings together efficient, economical, quality and functional products that give importance to innovation and R&D studies, thus saving energy in the heating sector, with final consumers. - Power 12 kW - Short start-up and thermal effect. - Possibility to operate in 2 stages and 5 stages with remote control. - Thanks to the separator cap on it, the heated air is thrown forward and creates the possibility of mounting closer to the ceiling. - Step display and manual control possibility on the display screen. - Special color options resistant to temperatures up to 1300°C. - Regional temperature control facility. - Energy saving. - High level of security. Safe gas valve system. - Low energy consumption. - Simple service and assembly. - Freeze protection. - Thanks to its special stones, it does not fade in windy and sudden weather changes. - Thanks to its specially designed high temperature resistant glass, it has 85% heat transmittance. - It maintains its integrity even in sudden temperature changes and does not lose its color. Technical Specifications / Features: - Capacity: 12kW - Gas Consumption: NG 1.71m³/h / LPG 1.27 kg/h - Dimensions: 270h / 960L / 225w - Weight: Net 18.80kg / Gross 20.45kg - Working Pressure: 21-55mbar NG / 32-55mbar LPG - Heating Area: min 15.3m² / avg 21.25m² / max 34m² - Stage: Standard 2 / Plus 5 - Ceramic Plate: 6 pcs - Electrical Connection: 230-240VAC 50-60Hz +/-15% - Gas Connection: G ¾ - Installation Height: 190 – 350cm Technology from the sun. All metal components are high temperature resistant and long lasting. All electrical components consist of high heat resistant non flammable silicone cables. Daygas ceramic radiant devices use special edition Daygas ceramic stones. The radiant wavelength must be within the infrared range. This is because the ceramic stone surface area is radiated in accordance with the desired conditions, the selection and quality of the stone are very important. - Remote control. - Integration via control board. - Pako switched manual control. - Thermostat-switched automatic control. - Integration into the automation system. (Control via Scada) The variety of control scenarios offered as 5 different alternatives allows the products to be managed correctly and in a desired way. The most appropriate control scenario is selected by evaluating the on-site use of the devices in our product range and the site conditions. Therefore, the control with the right solution scenario facilitates both fuel savings and long-lasting trouble-free service. - Operation order of the devices on the specified days and hours - Operation of the heaters with regional or individual step and modulation control - Seeing the fault codes from the devices in the system and which device is the problem and keeping it in memory - Functional controls such as instant, daily, weekly or monthly monitoring of fuel consumption are the advantages of the automation integrated system. Password protection. Heat preservation mode. Freeze protection feature. 24/7 programmable feature. 128 x 64 graphic LCD display. Communication port with computer. Possibility of automatic and manual control. Ability to connect external temperature sensor. Possibility to control 8 independent zones and 32 devices in total. It makes your work easier thanks to many commands, from the command to turn the devices on and off on the working days and at the time intervals you want, to keep the environment warm in the temperature range determined for freezing protection when the business is closed. Daygas analog room thermostat automatically turns off the device when the temperature value you have set is approached, and then when the ambient temperature drops below the desired temperature value, the device automatically switches on at the maximum level and starts working again. In this way, it saves fuel. Freeze protection mode. Possibility of modulating control. Temperature adjustment via the device. When your devices approach the temperature you programmed with the Daygas temperature sensor, it provides fuel saving by reducing the modulation value of the device according to the weather conditions. When the environment reaches the desired temperature value, the device automatically shuts down, and then when it falls below the desired value, the device automatically switches on at the temperature level most suitable for the environment and starts working again. With pako switched control, step adjusted manual control can be provided over the pako. For more local solutions where there is no control panel or it is not needed, the devices can be operated at the desired level via the paco switch. The heaters can be controlled with an independent step setting. Since the device is not powered on stand-by (0) position on the Pako, the device to be turned off goes to sleep after the closing procedures and thus long service life of the devices is ensured. Daygas remote controls are simple-to-use control devices with 3 buttons and easy functions. Thanks to the Daygas remote control, all functions of the device such as on-off, heat setting up-down and reset can be easily controlled. All Daygas products can be controlled remotely with a single remote.