Gas radiant heater DSR 18 Premium Edition

Daygas brings together efficient, economical, quality, and functional products that prioritize innovation and R&D, thus saving energy in the heating sector for end consumers. - Power: 18 kW - Short start-up and thermal effect. - Possibility of operation in 2 steps and 5 steps with remote control. - Thanks to the separator cap, heated air is projected forward, allowing installation closer to the ceiling. - Step display and manual control option on the display screen. - Special color options resistant to temperatures up to 1300°C. - Regional temperature control installation. - Energy saving. - High level of safety. Safe gas valve system. - Low energy consumption. - Simple service and assembly. - Frost protection. Technical Specifications: - Capacity: 18kW - Gas Consumption: NG 1.71m³/h, LPG 1.27kg/h - Dimensions: 270h x 1505L x 225w mm - Weight: Net 30.55kg, Gross 33.1kg - Working Pressure: 21-55mbar NG, 32-55mbar LPG - Heating Area: min 25m², avg 30m², max 50m² - Stage: Standard 2, Plus 5 - Ceramic Plate: 12 pcs - Electrical Connection: 230-240VAC 50-60Hz +/-15% - Gas Connection: G ¾ - Installation Height: 210 – 450cm Daygas ceramic radiant devices use special edition Daygas ceramic stones. The radiant wavelength must be within the infrared range. This is because the ceramic stone surface area is radiated in accordance with the desired conditions, the selection and quality of the stone are very important. - Remote control. - Integration via control board. - Pako switched manual control. - Thermostat-switched automatic control. - Integration into the automation system (Control via Scada). The variety of control scenarios offered as 5 different alternatives allows the products to be managed correctly and in a desired way. The most appropriate control scenario is selected by evaluating the on-site use of the devices in our product range and the site conditions. Therefore, the control with the right solution scenario facilitates both fuel savings and long-lasting trouble-free service. - Password protection. - Heat preservation mode. - Freeze protection feature. - 24/7 programmable feature. - 128 x 64 graphic LCD display. - Communication port with computer. - Possibility of automatic and manual control. - Ability to connect external temperature sensor. - Possibility to control 8 independent zones and 32 devices in total. It makes your work easier thanks to many commands, from the command to turn the devices on and off on the working days and at the time intervals you want, to keep the environment warm in the temperature range determined for freezing protection when the business is closed. - Freeze protection mode. - Possibility of modulating control. - Temperature adjustment via the device. When your devices approach the temperature you programmed with the Daygas temperature sensor, it provides fuel saving by reducing the modulation value of the device according to the weather conditions. When the environment reaches the desired temperature value, the device automatically shuts down, and then when it falls below the desired value, the device automatically switches on at the temperature level most suitable for the environment and starts working again. With pako switched control, step adjusted manual control can be provided over the pako. For more local solutions where there is no control panel or it is not needed, the devices can be operated at the desired level via the paco switch. The heaters can be controlled with an independent step setting. Since the device is not powered on stand-by (0) position on the Pako, the device to be turned off goes to sleep after the closing procedures and thus long service life of the devices is ensured. Daygas remote controls are simple-to-use control devices with 3 buttons and easy functions. Thanks to the Daygas remote control, all functions of the device such as on-off, heat setting up-down and reset can be easily controlled. All Daygas products can be controlled remotely with a single remote.