Gas radiant heater DSR 56

for heatingindustrialmobile

Daygas combines efficient, economical, high-quality, and functional products that prioritize innovation and R&D, saving energy in the heating sector for end users. - Power: 56 kW - Fast start-up and thermal effect. - Possibility to operate in 2 stages and 5 stages with remote control. - Thanks to the separator cover, the heated air is directed forward, allowing installation closer to the ceiling. - Stage display and manual control option on the display screen. - Special color options that withstand temperatures up to 1300°C. - Regional temperature control. - Energy saving. - High safety level. Secure gas valve system. - Low energy consumption. - Easy maintenance and installation. - Frost protection. Technical Specifications: - Capacity: 56 kW - Gas consumption: NG 5.32 m³/h / LPG 3.94 kg/h - Dimensions: 710h / 1440L / 410w - Weight: Net 51.85 kg / Gross 58.3 kg - Operating pressure: 21-55 mbar NG / 32-55 mbar LPG - Heating area: min 80 m² / avg 100 m² / max 135 m² - Stage: Standard 2 / Plus 5 - Ceramic plate: 24 pcs - Electrical connection: 230-240VAC 50-60Hz +/-15% - Gas connection: G ¾’’ - Installation height: 350-1200 cm - Package dimensions: 730h / 1470L / 450w DSR Radiant Heaters: - Special design with high heat capacity, Daygas ceramic stone, effective and economical performance in local heating solutions. - Sun technology. - All metal components are high-temperature resistant and durable. - All electrical components are made of high-temperature resistant, non-flammable silicone cables. Ceramic Stones: Daygas ceramic radiant devices use special Daygas ceramic stones. The radiation wavelength must be in the infrared range. This is because the surface of the ceramic stone is irradiated according to the desired conditions. The selection and quality of the stone are therefore very important. Device Control: - Remote control - Integration via control panel - Pako switched manual control - Thermostat-controlled automatic control - Integration into the automation system (SCADA control) The variety of control scenarios offered as 5 different alternatives allows the products to be controlled correctly and as desired. The most suitable control scenario is selected by evaluating the on-site use of the devices in our product range and the site conditions. Therefore, control with the right solution scenario facilitates both fuel savings and long-lasting, trouble-free operation. Integration into the Automation System (SCADA Control): Our devices can be directly integrated into building automation systems (BMS) via the Modbus communication protocol via the RS485 port (internal). If no BMS system is available, the devices can be fully automatically controlled from a single center via an HMI touch panel or a PC. In the BMS system: - Operating sequence of the devices on specified days and hours - Operation of the heating devices with regional or individual step and modulation control - Display of device error codes in the system to identify the faulty device and keep the errors in memory - Functional controls such as immediate, daily, weekly, or monthly monitoring of fuel consumption are the advantages of the integrated automation system. Control Units: - 128x64 graphic LCD display - Automatic and manual control - Communication port with computer - Possibility to connect an external temperature sensor - Possibility to control 8 independent zones and a total of 32 devices - 7 days, 24 hours programmable function - Heat protection mode - Frost protection function - Encrypted protection function It makes your work easier thanks to many commands, from controlling the switching on and off of the devices on the desired working days and time intervals to maintaining a warm environment in the temperature range set for frost protection when the company is closed. Analog Room Thermostat: Thanks to the Daygas analog room thermostat, the device automatically switches off when the heat value you set is reached. When the room temperature then falls below the desired temperature, the device automatically switches on at the maximum level and starts working again. In this way, it saves fuel. Digital Room Thermostat: - Frost protection function - Temperature control on the device - Possibility of modulation control When your devices reach the temperature programmed with the Daygas temperature sensor, the modulation value of the device is reduced depending on the weather conditions, resulting in fuel savings. As soon as the environment reaches the desired temperature, the device switches off automatically, and when the temperature falls below the desired value, the device switches on automatically and starts working at the most suitable temperature level for the environment. Pako Switched Manual Control: With the Pako switch control, step-by-step manual control can be provided via the Pako. For more local solutions where no control panel is available or required, the devices can be operated at the desired level via the Pako switch. The heating devices can be controlled with an independent step setting. Since the device is not switched on in standby mode (0) on the Pako, the device goes into standby mode after the shutdown procedures, ensuring the long service life of the devices. Remote Control: With the Daygas remote control, all functions of the device such as on/off, temperature increase and decrease, and reset can be easily controlled. All Daygas products can be controlled remotely with a single remote. - Sun technology - All metal components are high-temperature resistant and durable - All electrical components are made of high-temperature resistant, non-flammable silicone cables - Remote control operation - Manual and automatic control options - Integration with building management systems (BMS) via Modbus protocol - Programmable operation for up to 8 zones and 32 devices - Frost and heat protection modes Technical Specifications / Features: - Power: 56 kW - Gas consumption: NG 5.32 m³/h / LPG 3.94 kg/h - Dimensions: 710h / 1440L / 410w - Weight: Net 51.85 kg / Gross 58.3 kg - Operating pressure: 21-55 mbar NG / 32-55 mbar LPG - Heating area: min 80 m² / avg 100 m² / max 135 m² - Stage: Standard 2 / Plus 5 - Ceramic plate: 24 pcs - Electrical connection: 230-240VAC 50-60Hz +/-15% - Gas connection: G ¾’’ - Installation height: 350-1200 cm - Package dimensions: 730h / 1470L / 450w