DN: 2 in - 12 in
Pressure: 20 bar
Temperature: -60 °C - 538 °C
... available • Integral top-works direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • ...
HABONIM
DN: 80 mm - 300 mm
Pressure: 10, 25, 16, 40 bar
Temperature: -50 °C - 450 °C
... Triple offset valve with lugs for high pressure and temperature loads. Can be removed from the flange on both sides. For installation between flanges EN 1092, PN 10/16/25/40, PS25, ASME ...
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... passengers and/or crew. Regulating temperatures of tank heating coils: HAT valves limit the temperatures of the heating element by closing before coil temperatures are ...
Thermomegatech
Pressure: 207 bar
Temperature: 121 °C
... could otherwise be harmed by high temperature samples. The valve responds only to temperature. Under normal operation the valve is fully open. If the sample temperature ...
DN: 40 mm
Pressure: 0 bar - 0.2 bar
Temperature: 5 °C - 90 °C
... or hose connections. The Valve with valve body made of PPE, is suitable for water of higher temperature and chemically resistant. By using high quality insulation materials, continuous ...
Temperature: -18 °C - 343 °C
... seals, the FL-HT gate valve design takes advantage of our latest technology in materials and seal design. In addition, the FL-HT gate valve is rated for API Temperature Class Y, 0 to 650 degF [–18 to ...
DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar
... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 400 °C
... The CP-06 offer a wide array of needle valves that are specifically constructed to be applied with liquids that both posses high pressure and temperature service. Fabricated from AISI-36 ...
TECVAL, S.L.
DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C - 300 °C
... 125M High Temperature The 125M sampling valve is equipped with a metallic piston (Stainless Steel, Hastelloy) for sampling process up to 300°C (572° F). The piston is equipped with a expandable ...
FAMAT
DN: 150 mm - 1,200 mm
Pressure: 16, 10, 25 bar
... Double-offset flanged butterfly valve (resilient-seated) with albronze coating for high temperatures of up to 150° to 200° C. Long service life, as the medium does not come into contact with the bearing, ...
DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C
... treatment, sludge, saturated steam, super‑heated steam, high temperature, high velocity, powder (PP.PE) Options • Ball surface hardening process • Extension bonnet • Jacketed ball valve ...
Pentair Valves & Controls
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C
... Features • High reliability due to thick-walled PFA lining: universal resistance and maximum permeation resistance •Safety also at high pressures and temperatures due to Heavy-Duty bellows •Chlor ...
Richter Chemie Technik
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
... industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316 ...
DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 450 °C
... Double Plate Gate Valve refers to Australian "Armstrong" valve technology and has been successfully developed by researchers for many years. The valve is replaced by double valve plate ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 3 mm - 16 mm
Temperature: -196 °C - 550 °C
... Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Steam conditioning VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 15 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 300 °C
... Body material Cast iron Check valve material Stainless steel PN (End) PN16 End Flanged Contact sealing Métal/Métal Operating system Handwheel ...
DN: 0.25 in - 2 in
Pressure: 140, 100 bar
Temperature: -20 °C - 220 °C
... specialized with a locking device, hand wheel, stem extension and an ISO 5211 mounting pad. For high temperature, PEEK seat is on request. 3 pièces carbon Steel bail valve fully encapsulated bolts ...
SFERACO
DN: 0.5 in - 2 in
Pressure: 0.5 bar - 8 bar
Temperature: 0 °C - 80 °C
... The diaphragm float valves series F can be combined with our float hollow balls made of high-quality PE-HD plastic (max. 70 °C), alternatively with copper or stainless steel balls for high temperatures. ...
PVA Schwimmerventile GmbH
DN: 1.5 in - 12 in
Pressure: 16 bar - 420 bar
... primarily for high pressure compressible fluid or two-phase applications. - It effectively controls erosion, vibration and high noise conditions, making it an ideal solution for high ...
Athena Engineering S.r.l.
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
DN: 45 mm
Temperature: 180 °C
... Microcast (CF-8M). Piston - Stainless Steel 316. Spring - Steel (SAE 6150) - White Zinc Treatment Cr3+. Media Oils at high temperature, solvent, Silicon fluid , air, LGP, NVG, Di-Es- ter lubricant based,Oxigen and ...
DN: 0.5 in - 6 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 593 °C
... suitable for high pressure différence working conditions. For small flow and large pressure différence, a needle valve core is used, which has a large ...
Suzhou Delan Energy Science & Technology Co.,Ltd
DN: 200 mm - 2,000 mm
Pressure: 2.5, 6, 10 bar
Temperature: -40 °C - 1,100 °C
... • Double flange damper is used as a control or shut-off valve intended for operation with air or process gases, • Lamellar sealing suitable for dusty gases, • Possibility of customising face to face length and flange connections, standard ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
... regulates fluid flow in pipelines Used in applications requiring full open or full close operation Suitable for high-pressure and high- temperature environments Ideal for industries requiring ...
DN: 0.5 in - 2 in
Pressure: 16, 40 bar
Temperature: 0 °C - 187 °C
... Modulating valve with stainless steel or brass body. Angled seat pneumatic valve with electronic control of flow rate modulation. Electronic flow modulation with exclusive MAROS technology Parabolic ...
MAROS Engineering
the best suppliers