... Planetary gearbox with pneumatic clutch brake Standard output torque: 4,000-160,000 Nm One-stage reduction up to i=10 Standard units and customised solutions ...
Rotational speed: 2,000 rpm - 2,000 rpm
Gear ratio: 11 unit - 40 unit
... wave drive integrates a cross-roller bearing coupling for the wave generator to enable automatic fine adjustment of coaxiality. The camshaft bore can be adapted to the customer's motor model. The input shaft fits directly ...
Suzhou Honpine Precision Industry Co., Ltd.
Rotational speed: 3,500 rpm - 15,000 rpm
Backlash: 0 rad - 0 rad
Gear ratio: 11 unit - 40 unit
... strain wave drive integrates a cross‑roller bearing coupling on the wave generator to enable automatic fine adjustment of coaxiality. The cam‑ shaft bore can be tailored to the customer's motor; the input shaft ...
Suzhou Honpine Precision Industry Co., Ltd.
Rotational speed: 4,000 rpm - 15,000 rpm
Gear ratio: 11 unit - 40 unit
... /b>
- Large hollow shaft structure for cable and optical line routing
- Fully sealed integrated flange design, pre-filled with specialized lubricating grease
- Input connection via timing pulleys
Suzhou Honpine Precision Industry Co., Ltd.
Power: 0 kW - 140 kW
Gear ratio: 6.8 unit - 597 unit
...
Input options include a projecting input
shaft or pre-engineered motor
coupling variants (bell and joint or compact motor coupling). An optional second input
shaft can be provided on request. The ...
TRAMEC
Power: 0 kW - 270 kW
Gear ratio: 5 unit - 250 unit
... br>
Accessories
- Output shaft
- Mounting and dismounting kit for hollow output shaft
- Hollow output shaft with shrink disc
- Output
TRAMEC
Power: 0 kW - 90.2 kW
Gear ratio: 5 unit - 63 unit
... output shaft mounting/dismounting kit, hollow output shaft with shrink disc, output flange, torque arm, hollow shaft protection kit, backstop device
TRAMEC
Backlash: 0.1 grad - 0.6 grad
Gear ratio: 13,600 unit
... ACBAR eccentric gears are indestructible and allow greatest gear ratios in minimal space. What ACBAR eccentric gears especially characterized. • Compact and indestructible • Ratios up to 13‘600:1 single ...
AKIM AG
Backlash: 0.02 grad - 0.5 grad
... AKIM two-Disc Gears are robust, strong and reliable – even for rough use. They are available in two versions: with output side shaft end or with hollow output shaft to put on. What ...
AKIM AG
... AKIM Centrifuge Gears are extremely low vibration. Construction according to customer specification. What AKIM Centrifuge Gears especially characterized. • Construction according to customer specifications • Compact ...
AKIM AG
Power: 3.3 kW - 190 kW
Gear ratio: 4, 3, 2, 5, 1 unit
... • Ultra Compact Bevel Gearbox Design • 2-way, 3-way & 4-way Configurations • Solid Shaft & Hollow Shaft • Gear Ratios: 1:1, 1.5:1, 2:1, 3:1 & 4:1 • Torque Ratings ...
Rotational speed: 433, 361, 260, 217, 173 rpm
Power: 25 W - 250 W
Gear ratio: 3 unit - 200 unit
... its tooth profile meshing ratio is more than twice that of ordinary spur gears. The bevel gear of the reducer adopts a hypoid spiral bevel gear, and the tooth surface is grinded, which ...
WANSHSIN SEIKOU (HUNAN) CO., LTD.
Rotational speed: 2,000 rpm
... reduction gears with through-holes in the shafts, also known as the hollow- shaft version. Cables, tubes with compressed air, drive shafts and so on can be led through ...
Power: 0.06 kW - 4 kW
... It is the best solution for the resistance to corrosion. Suitable for all applications. Entirely in stainless steel with smooth surfaces for easy cleaning. Also available with stainless steel motor SPM series ...
CLEAN-GEARTECH
... mounting options with protruding / hollow input and output shafts. • Flanges for direct connection to machine, motors and display with position indicators. • Available versions: - Gear reducer - ...
FIAMA
Rotational speed: 400 rpm
Power: 0 kW - 600 kW
... Series is specially designed for applications and sectors that request high torque within restricted area. The design of our IPR gear units not only provide high performance ratings into compact dimensions, but the large range of configuration ...
I-MAK Réducteurs
... -V / H-EThe PSC-V / H-E sub-assemblies are particularly low-backlash gearboxes and are mainly used in the field of robotics. More about our sub-assembliesYour advantage:The gearboxes can be mounted directly to your equipment ...
Melior Motion GmbH
... PGF low backlash planetary gearbox offers IP65 class enclosure and lifetime lubrication. Flange mounting system allows users to install it in any position. PGF servo motor planetary gearheads are available in 3 backlash ...
... for high quality Of course, we do also offer the PowerMaster gearboxes with hollow shaft, and with hollow shaft and shrink disk. ...
... WORM GEARBOX WITH STAINLESS STEEL OUTPUT SHAFT Paint on request [ ANTICORROSIVE GEAR ] POINT OF STRENGTH THE SOLUTION Worm gearbox panted with stainless steel hollow ...
... 2SP78.. was developed to operate in conditions where the highest quality of control is an absolute prerequisite. Key features: -Unsurpassed level of precision: Max. 0.2° tolerance -Continuous duty: Meets Class D requirements of EN 15714-2 ...
... advanced gear and transmission solutions suitable for a wide range of industries. Radicon, a part of the Elecon Group, is known for its extensive product range and innovative solutions in the field of gears and transmissions. - ...
Rotational speed: 1,800, 1,400 rpm
Power: 0.5 kW - 24.9 kW
Gear ratio: 5 unit - 100 unit
... die cast aluminium • Motor flexible coupling • Gears in cemented and hardened alloy steel • Support hub in grey cast iron • Synthetic oil for lifetime lubrication of the gears • RCA oil seal in NBR • ...
VARVEL
Gear ratio: 0 unit - 80 unit
... The input drive shaft of the hollow- shaft model, mounted in ballbearings, enables the gear to be self-sustained and allows the attachment of standard motors without any problem or the ...
Rotational speed: 5 rpm - 240 rpm
Power: 0.17 kW - 9.4 kW
... The high degree of modularity is a design feature of ATS shaft mounted range. It is possible to set up the version required by using input and output kits. The main features of ATS range are: Die-cast aluminum housings and input flanges Permanent ...
Rotational speed: 17.2 rpm - 250 rpm
Power: 0.25 ch - 5 ch
Gear ratio: 7 unit - 100 unit
... Aluminum Shell Worm Gear, 257 - 2921 in-lbs., 1/4 - 5 HP, 17.2 - 250 RPM Standard Hollow Output Shaft Mounting Reduces total drive envelope size, weight and cost. Single output shaft ...
BISON
Gear ratio: 15, 20, 25, 5 unit
... series J is the latest generation of the very famous SALA pinion gearboxes. The gear design has in many ways laid the foundation for a market standard for this type of gear and is still perceived as the "original" ...
BENZLERS
... Rack and pinion gear Ket-Motion 2020 ZxK The function of the universally applicable linear gear units is to convert rotating movements into axial ones. They are used wherever vertical or horizontal ...
Ketterer
Rotational speed: 2,200 rpm - 6,000 rpm
Backlash: 0.02 ° - 0.07 °
... Precision ground gears have smooth surfaces and accurate profiles. The series case and inner ring gear, designed into a one-piece structure, are made of special stable alloy steel. Low Noise For the high standard ...
Sunus Tech Co., Ltd.
Rotational speed: 0 rpm - 12,000 rpm
Power: 400 ch
... noise levels. This compact, light-weight design matches the latest spindle drive motor technology and offers: Hollow through bore to facilitate a draw bar and through spindle coolant Round Housing ...
REDEX Group
Power: 45 kW
Gear ratio: 1.23 unit - 282.1 unit
... Available versions: H - fitted for motor coupling, IH - with input shaft, CH - with compact motor, PH - fitted for motor coupling with flexible joint Casing with feet, flange F or universal U Gears ...
MOTOVARIO
the best suppliers