DN: 0.5 in - 4 in
Pressure: 10, 30, 5 bar
Temperature: 0 °C - 150 °C
... The VSS high purity ball valves are engineered to be a true process piping component, suitable for intercepting pure steam and pharmaceutical fluids under pressure. These three pieces ball valves are machined from solid ...
AERRE INOX Srl
Pressure: 400 bar
Temperature: -30 °C - 80 °C
... advantage of the numerous benefits this brings. The DM - XOVER product is sold pre-assembled with the dual line divider valve elements (from 1 to 4 depending on the model) installed. This can be installed directly into the pipe centers ...
Dropsa spa
DN: 150 mm - 350 mm
Pressure: -1 bar - 6 bar
Temperature: -52 °C - 180 °C
... Application The diverter valve Y is used especially for diverting the bulk material flow in pneumatic dense- and dilute-phase conveying systems. The patented design of the plug enables application in any conveying direction. Design ...
Zeppelin Silos & Systems
DN: 0.5 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
... Certificates: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL ...
Rotex Automation Limited
DN: 3 in - 5 in
... area series of butterfly air intake shutoff valves are ATEX approved for Zone 1, Gas Group IIB, T4 or Zone 21 hazardous area applications. The 12 and 24VDC valves are designed with “fail safe” ...
DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C
... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve to the cylinder ...
DN: 25 mm - 150 mm
Pressure: max 22.7 bar
... Reliable flow direction control in a hygienic production process - Two-part valve disc, screwed, with a defined space for the sealing ring for easy installation - Seal resistant to seepage and ripout - Shaft seal design: ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - Gases - Municipal ...
Emile Egger & Cie SA
DN: 40 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 200 °C
... Cast iron bail valve with ISO 5211 mounting pad full bore for ail common fluids of 2nd group. 2 FKM O Ring and 1 PTFE gasket on stem, PTFE body gasket and PTFE seat. Compatible with explosive atmosphère, ATEX Zone 1&21 ...
SFERACO
DN: 150, 200, 250 mm
Pressure: 1 bar
Temperature: 100 °C
... Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The product is ...
COMAV
DN: 50 mm - 600 mm
Pressure: 4, 10 bar
... With steel or ductile iron handwheel (without protective cage) Can be used as an intermediate flange or end slide valve Standard version in stainless A4, special versions on request External spindle ...
DN: 25 mm
Pressure: 6, 12, 16 bar
Temperature: 0 °C - 130 °C
... Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from the vessel), to control product contamination against external air that may fill ...
VALSTEAM ADCA Engineering S.A.
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...
Athena Engineering S.r.l.
Pressure: 0 MPa - 25 MPa
Temperature: -20 °C - 80 °C
Flow rate: 210 l/min
... 1.Rated pressure 19Mpa 2. Maximum pressure 25Mpa 3. Rated flow 210L/min 4. Working temperature -20 to 80°C 5. Working medium : Anti-wear hydraulic oil ...
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
DN: 1.25 in - 4 in
Temperature: 100 °C
... 3-way high flowrate vacuum valve VACUUM/VACUUM BREAKER valve when used with vacuum pumps DIVERTER VALVE when used with blowers Advantages • Rapid vacuum interception and interruption • Remote ...
MAROS Engineering
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust the control ...
Zaklady Automatyki POLNA S.A.
DN: 8 mm - 100 mm
Pressure: 10, 25, 100 bar
Temperature: -220 °C - 200 °C
... stem freezing and allows easy valve operation. Approvals: PY4 CY design: EN1626 PY4 CY Fire Safe design: EN12567, ISO10497, API607 and API6FA PED 97/23/CE TA-Luft (fugitive emissions) AD2000 Merkblatt Options: ATEX ...
DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C
... -25 EX Certificate: ATEX 94/9/EG Group II Category 2 GD ABS Certificate: ABS Steel Vessel Rules 1-1-7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves ...
DN: 15 mm - 50 mm
Pressure: 10 bar - 25 bar
Temperature: -271 °C - -30 °C
... Easy replacement of the compatible valve inserts - Prepared for installation into vacuum-jacketed lines - Cryogenic valve and filter series (globe or control valve, filter) in standard execution - ...
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... SAFETY QUICK-CLOSING BUTTERFLY FLAP VALVE Being part of the proven KÜHME high-performance valve series for industrial applications, the PKIII type is used in any application where safe and quick shut-off ...
Kühme Armaturen GmbH
... HVHS VENTING SAFETY LOCK-OUT VALVE It is easy to be maintained because it can realse the pressure of the hypo-pressure side when it is working. It can ensure the safety of the maintenance man because of the lockup function. ...
DN: 25 mm - 300 mm
Pressure: 69 bar
Temperature: 540 °C
... The SMS-7100 direct spring operated pressure relief valves has been designed to protect against excess pressure steam boilers and to provide superior performance. These valves are designed and manufactured according ...
Pressure: 20, 10 bar
Temperature: -20 °C - 280 °C
... emission limits of ≤ 1 μg/m³ • intuitive and safe handling • robust and compact design • integrated AVAX interface • Hybrid operation with AVAX plastic variant possible • CIP & SIP-capable version • ATEX conformity ...
DN: 150 mm - 400 mm
Pressure: 50, 25 bar
... INTER-TECH valve is equipped with métal to métal sealing, for severe applications where a plastomer seat is not viable. TECHNOLOGY Plate standardisée) in accordance with EN-ISO 5211 Adjustable stuffing box Graphite packing Treaded ...
the best suppliers