High-performance valves

DN: 0.25 mm - 4 mm
Flow rate: 5 m³/h - 435 m³/h

- Approvals: DGRL 2014/68/EU, CRN, ATEX (manufacturer declaration, except manual version), 3.1 material certificates - without ISO 5211 flange mounting: • 2-piece, 2-way without ISO 5211, with lockable hand lever - with ISO 5211 ...

Temperature: -60 °C - 600 °C
DN: 50 mm - 1,200 mm

High operating pressures and extreme temperatures - wherever other valves reach their physical limits, this series is the ideal solution. The double eccentric design of the valve disc, ...

Temperature: -60 °C - 600 °C
DN: 50 mm - 1,200 mm

High operating pressures and extreme temperatures - wherever other valves reach their physical limits, this series is the ideal solution. The double eccentric design of the valve disc, ...

Temperature: -60 °C - 600 °C
Pressure: 40, 25 bar
DN: 80 mm - 600 mm

High operating pressures and extreme temperatures - wherever other valves reach their physical limits, this series is the ideal solution. The double eccentric design of the valve disc, ...

Temperature: 170 °C
Pressure: 0 bar - 16 bar
DN: 15 mm - 100 mm

... actuated 2-port angle pattern clean service control valve suitable for a wide range of applications in the pharmaceutical industry. The self-draining crevice free design incorporates high performance ...

Temperature: 0 °C - 80 °C
Pressure: 0 bar - 5.5 bar
DN: 0.25 in

... HPVM Molded Valve was developed to add critical features including visual indication and standard FlareGrip® II end connections to the robust HPV machined versionThis pneumatically actuated 2-way diaphragm valve ...

Temperature: 0 °C - 80 °C
Pressure: 0 bar - 5.5 bar
DN: 0.25 in

... HPVM Molded Valve was developed to add critical features including visual indication and standard FlareGrip® II end connections to the robust HPV machined versionThis pneumatically actuated 2-way diaphragm valve ...

Temperature: -50 °C - 260 °C
Pressure: 25 bar
DN: 50 mm - 1,200 mm

This is one of the most advanced double-offset butterfly valves, equipped with a metal or a plastomer-seat ring, depending on what suits you. The materials used, like stainless and cast steel, provide extra durability. It ...

Temperature: 210 °C
Pressure: 207 bar

If you wanted to invest in a ball valve with a guaranteed high performance, this should definitely be one of the options to look for. In addition to advanced features, the manufacturer ...

Pressure: 0 bar - 34.7 bar
DN: 0 mm - 1.5 mm

This needle valve comes with an adjustable orifice, which can be used to control flow rates, as well as timing circuits, filing heads, bleeding vents and various other applications. In addition to this, ...

Pressure: 0 bar - 13.8 bar
DN: 1.1 mm

... offer this 10-32 Thread Venting, Slide Sleeve Valve, constructed from brass, silicon, viton, chemraz, buna-N, and Flourosilicone to ensure it provides a trouble free and extended working life. This valve ...

Pressure: 0 psi - 250 psi
DN: 1.78 mm

... Description: Beswick’s miniature mixing/diverting ball valve is an excellent choice for applications requiring a port selection valve. The valve features one common inlet port, and two ...

DN: 80 mm - 1,200 mm

High-performance butterfly valve metal seated DV500.MTV DV500.VSS Control and on-off functions Diameter DN80–DN1200 Low noise for high differential pressures ...

Temperature: 0 °C - 550 °C
DN: 80 mm - 600 mm

High-performance butterfly valve metal seated low noise DV500.VSS LN Especially designed for control at high differential pressures. The valve is designed ...

Temperature: 0 °C - 100 °C
Pressure: 6 bar - 16 bar
DN: 40 mm - 300 mm

The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term ...

Pressure: 7 bar
DN: 350 mm - 400 mm

... FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This ...

Pressure: 16 bar
DN: 40 mm - 300 mm

The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term ...

Temperature: -20 °C - 220 °C
Pressure: 40 bar
DN: 15 mm - 100 mm

The 710 series, which are manufactured by Sferaco, are 3-piece ball valves with flange. They feature a full bore, an anti blow-out stem, a gland pack that has an elastic washer, and a locking device. The unit is also ...

Temperature: -20 °C - 220 °C
Pressure: 40, 63 bar
DN: 0.25 in - 4 in

The valve comes built with a full bore and anti blow-out stem in a PTFE stainless-steel seat, along with an ISO 5211-rated mounting pad. An antistatic device (DN8-32) is incorporated into the valve, with ...

Temperature: -20 °C - 200 °C
Pressure: 20 bar
DN: 15 mm - 100 mm

... actuated high pressure needle valves, fittings, tubing, check valves, adapters and couplings as well as accessories for High Pressure ...

Temperature: 815 °C
Pressure: 10 bar - 160 bar
DN: 2 in - 88 in

... an allrounder for many different industrial applications. Zwick valves are used for industrial and exhaust gases, liquids, hot water or steam at lowest as well at high temperature ...

Pressure: 0.1 bar - 10 bar

Spray valve very reliable and cheap. Perfect for many spray applications.

Temperature: 104 °C - 720 °C
Pressure: 10 bar - 250 bar
DN: 0.5 in - 6 in

... solution to attain its reliability. The valves consist of metallic seats down to the temperature of 100°C maximum. They are made up of polymetric seats for lower level of temperature which enables the ball valves ...

Temperature: -20 °F - 180 °F
Pressure: 0 psi - 125 psi

Any TAC Push Button Valve may be operated with a choice of four TAC Air Pilot Operators. Valves are miniature 2, 3 and 4-way, and available in 10-32 UNF, 1/8 and 1/4 pipe sizes. Thread Air Pilot Operator ...

Temperature: -20 °F - 180 °F
Pressure: 0 psi - 125 psi

Humphrey TAC3 Series, 1/4 pipe, 4-Way Valves are five ported and compact. TAC3 valves available in three models: the Single Air Piloted-Spring Return model or the Double Air Piloted-Detent model. The ...

Temperature: -20 °F - 180 °F
Pressure: 0 psi - 125 psi

TAC Miniature Toggle Valves are miniature pneumatic 2, 3 and 4-way valves available in 10-32 UNF and 1/8 PIPE sizes. Compact and rugged, TAC Toggle valves provide excellent flow, and ...

Temperature: -29 °C - 180 °C
Pressure: 0 bar - 12 bar
DN: 65 mm - 300 mm

... due to absolute tightness - Optionally available as quick-closing control valve combination - Heavy duty design for high amount of operating cycles - High-performance ...

Temperature: -25 °C - 180 °C
Pressure: 0 bar - 1.2 bar
DN: 200 mm - 400 mm

... Advantages - Closing time < 1 second - High safety level through zero leakage - Heavy duty design for high amount of operating cycles - High-performance ...

Temperature: -196 °C - 400 °C
Pressure: 0 bar - 60 bar
DN: 25 mm - 300 mm

... Due to its application-specific design, the valve type KVL offers a safe and reliable solution to shut-off process media even under most extreme conditions. Because of its extraordinary reliability, the valve ...

Pressure: 0 bar - 100 bar

... Metering Impulse Valve in the P1 series with a compact design is an extremely fast-switching pneumatically controlled high-performance valve for the contactless dosing ...

Temperature: -20 °C - 110 °C
Pressure: 10, 16 bar
DN: 40 mm - 600 mm

High performance butterfly valve. Replaceable liner vulcanized on back-up ring. Modified ISO top. Option: Alu-bronze disc Type E6820 CE - ATEX - 3D

Pressure: 10 bar
DN: 50 mm - 300 mm

High performance butterfly valve. PTFE liner on flexible silicone backup ring ensures perfect tightness at full differential pressure. Resistant to most media. ATEX - SIL

DN: 50 mm - 300 mm

Gas approved high performance wafer butterfly valve. Liner in gas approved NBR rubber, vulcanized on back-up ring. Suitable for vacuum. ATEX - DVGW - SIL

Pressure: 1,000 psi
DN: 0.25 in - 2.5 in

Size Range 1/4"~2-1/2" Blow-out proof stem design ISO5211 mounting pad Chemical, food, oil/gas, etc. All S.S weld ends in S.S 316L/CF3M 100% tested air under water at 100psi, open and closed ...

Temperature: 0 °C - 107 °C
Pressure: 285 psi - 3,705 psi
DN: 2 in - 16 in

The SchuF Maniflow Selector Valves (MSV) - a multiport selector valve type - is used in oil fields and other Oil and Gas applications for the testing and analysis of oil from two or more production wells. ...

The NAF Duball is a ball valve that is made as a modulating control valve and can work with a shut-off or on/off control valve. It is made with a stainless steel body but other options ...

Temperature: -400 °F - 1,500 °F
DN: 3 in - 96 in

... conventional resilient seated and high performance butterfly valves over all services ranges. Tricentric® Triple Offset Valves incorporate 3-way eccentricity. The metal ...

Temperature: 260, 300 °C
DN: 50 mm - 750 mm

... of ball valves, with floating and trunnion mounted options, are designed for reliability and high-performance, and are an excellent choice for shutoff applications in the power, oil & ...

Eaton's pressure control valves are made to keep hydraulic systems active without risking excess pressure controls. These devices can manage pressure relief and reduction functions while using sub-plate and in-line mounting ...

Pressure: 5,000 psi

... Auto-Flo Valves offer an accurate deposition and control for applications which need uniform bead and spray patterns as well as sharp material cut-off because of the automatic on/off valve. The valves ...