IP40 torque sensors

Torque: 0 Nm - 1,000 Nm

The 8661 precision torque sensor is the ideal choice for reliable measurement of static and dynamic clockwise and counter-clockwise torques. Thanks to its high measurement quality and ...

Torque: 0 Nm - 100 Nm

Precision torque sensor - 8656 The very short torque sensor model 8656 is contactless constructed. The torque is recorded by the torsion of the shaft ...

Torque: 0 Nm - 160 Nm

Torque sensor 8655 The compact torque sensor model 8655 with standard square is contactless constructed. The torque is recorded by the torsion of the ...

Torque: 0.02 Nm - 20,000 Nm
Precision: 0.15, 0.1 %
Rotational speed: 0 rpm - 37,000 rpm

27 torque ranges from ± 0 - 0,02 Nm up to 20.000 Nm precise measurement of torque, speed and angle of rotation Features DRVL • contactless signal transmission • integral signal amplifier • low ...

Torque: 0.5 Nm - 1,000 Nm
Precision: 0.5 %
Rotational speed: 0 rpm - 22,000 rpm

Torque ranges from 0,5 to 1000 Nm Features • Low-Cost Torque transducer • Current output and voltage output • Very short • Measurement accuracy: ≤ 0.5% of full scale • Contactless ...

Torque: 0 Nm - 5,000 Nm
Precision: 0.1 %
Rotational speed: 0 rpm - 36,000 rpm

2-range- torque transducer "DRDL" Simultaneous measurement of peak torque and operating torque Torquesensor with speed or angle measurement High accuracy with 100% ...

Torque: 0.5 Nm - 1,000 Nm
Precision: 0.25 %
Rotational speed: 0 rpm - 25,000 rpm

... options • torsion shaft stainless • mistake-proof installation • oriented mounting • large coupling selection The torque sensors of the DRBL series are a further development of our DRBK series ...

Torque: 0 Nm - 10,000 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 12,000 rpm

... and to sense loosening torques, etc. lt can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. ...

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 10,000 rpm

Torque sensor "DRFS ¼" hexagonal drive 7 Measurement range from ± 0 - 1 Nm up to ± 0 - 20 Nm optionally with angle measurement Features: • No service needed because of contactless data acquisition • ...

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 8,000 rpm

... frequency modulation and DMS principle • high interference immunity due to amplified active signal • integrated chip for sensor detection in conjunction with evaluation unit GMV2 and ValueMasterBase

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 10,000 rpm

Torque sensor with quick-change chuck "DRFSk" hexagonal drive very short construction 6 torque range from ± 0 - 2 Nm to ± 0 - 20 Nm rotation angle measurement option Features ...

Torque: 0 Nm - 50 Nm
Precision: 0.15 %
Overload limit: 100 %

... : 0,5 - 20 Nm DRDMS: 0,5 - 20 Nm DRDMN: 10 - 50 Nm With mechanical coupling for maxon gears. As a complete drive and torque measuring unit. For Test bench construction and Bolting technology

Torque: 0 Nm - 6,000 Nm
Precision: 0.1 %
Overload limit: 50 % - 100 %

Reaction torque transducer "DRT" 16 Measureing range between ± 0 - 2 Nm to± 0 - 6000 Nm • for static use • active and passive execution • optionally with bracket Features • Pulse ...

Torque: 0.2 Nm - 5,000 Nm
Rotational speed: 5,000 rpm

• Dual range sensor with two separately calibrated torque measuring ranges • Well suited for static and dynamic measurements with a cut-off frequency (–3 dB) 10 kHz • Very high accuracy thanks to linearity ...

Torque: 2 Nm - 5,000 Nm
Rotational speed: 50,000 rpm

• Dual range sensor with two freely selectable measuring ranges in 5% steps • Well suited for static and dynamic measurements with a cut-off frequency (–3 dB) 10 kHz • Very high accuracy thanks to linearity error including ...

Torque: 0.5 Nm - 1,000 Nm
Rotational speed: 12,000 rpm

... ends Product type Rotating / Non-rotating Rotating Mechanical properties Overload capacity at service torque 1,5 x Mnom Limiting Torque 150 % Metrological characteristics Linearity including ...

Torque: 2 Nm - 1,000 Nm
Rotational speed: 3,000 rpm

... measurement Product type Rotating / Non-rotating Rotating Mechanical properties Overload capacity at service torque 1,5 x Mnom Limiting Torque 150 % Metrological characteristics Linearity ...

Torque: 1 Nm - 1,000 Nm
Rotational speed: 10,000 rpm

... Integral speed measurement with 60 pulses/revolution Rotating / Non-rotating Rotating Mechanical properties Limiting Torque 150 % Metrological characteristics Linearity including hysteresis 0.5 %FSO Dual-range No Accuracy ...

Torque: 0.2 Nm - 1 Nm

• Nominal value: 1 Nm • Autocode identification The robust static torque sensors of Type 5413-1030 are applied for measuring torques. The torque sensor ...

Torque: 100 Nm - 500 Nm

• Autocode identification The robust static torque sensors of Type 5413-1030 are applied for measuring torques. The torque sensor measuring shaft ...

Torque: 2 Nm - 10 Nm

The robust static torque sensors of Type 5413-1030 are applied for measuring torques. The torque sensor measuring shaft is equipped with strain gauges ...

Torque: 0.2 Nm - 1 Nm
Rotational speed: 5,000 rpm

The robust rotating torque sensors Type 5413-1100/, 5413-1160/ and 5413-1151/ were designed for measuring torques and torques / angles of rotation. The torque ...

Torque: 400 Nm - 2,000 Nm
Rotational speed: 3,000 rpm

The robust rotating torque sensors Type 5413-1100/, 5413-1160/ and 5413-1151/ were designed for measuring torques and torques / angles of rotation. The torque ...

Torque: 300, 150, 700 Nm

FUTEK’s Reaction Torque Sensor - Flange/Square Drive offers a unique solution for auditing and calibrating mechanical torque wrenches, also used in production and automated assembly applications. ...

Torque: 1,400 Nm

... TDF Reaction Torque Sensors are frequently used as auditing and torque wrench calibration tools. If you are wondering how to calibrate a torque wrench, FUTEK’s TDF ...

Torque: 2,712 Nm

... TDF Reaction Torque Sensors are frequently used as auditing and torque wrench calibration tools. If you are wondering how to calibrate a torque wrench, FUTEK’s TDF ...

Torque: 0.5 Nm - 18 Nm
Rotational speed: 0 rpm - 7,000 rpm

FUTEK’s Rotary Torque Sensor - Non Contact Hex Drive with Encoder offers a unique solution for torque auditing applications. The TRH605 Rotary Torque Sensor ...

Torque: 20, 12, 6, 2 Nm
Rotational speed: 0 rpm - 3,000 rpm

FUTEK’s Rotary Torque Sensor - Hex Drive offers a unique solution for torque auditing applications. The TRH300 Rotary Torque Sensor - Hex Drive is available ...

Torque: 1 Nm
Rotational speed: 0 rpm - 150 rpm

... Rotary Torque Sensor w/ Integrated TEDS, 6mm Male Shaft to Shaft , RoHS Compliant , Material - 17-4PH S.S. Shaft Aluminum Housing, 7 Pin Quick Disconnect Nano Receptacle The QTA163 rotary torque ...

Torque: 0.04 Nm - 56 Nm

... Reaction Torque Sensor offers a unique solution for torque auditing applications. The TFF425 Reaction Torque Sensor is available in Aluminum construction ...

Torque: 11.3 Nm

FUTEK’s Reaction Torque Sensor offers a unique solution for torque auditing applications. The TFF500 Reaction Torque Sensor is available in both Aluminum ...

Torque: 225, 1,130 Nm

... evaluate low-torque components and controls. Flange-reaction torque sensors measure small-reaction torque levels using flange-to-flange connections in-line with the component ...

Torque: 60, 150 Nm

... Reaction Torque Sensor offers an OEM solution for torque auditing applications. The TFF350 Reaction Torque Sensor is available in Aluminum and 17-4 Stainless ...