- Hydraulics - Pneumatics >
- Pump >
- Large pump
Large pumps
Flow: 1.3 l/min
Pressure: 238, 7 bar
Weight: 16 kg
... medium-solid products to dispensed in total efficiency thanks to the perfect coverage of airless atomisation for finishing large surfaces in a shorter time. This airless anticorrosion spray unit, Atex certified, thanks to the quality ...
LARIUS SRL
Flow: 3.8 l/min
Pressure: 210, 7 bar
Weight: 25 kg
... medium-solid products to dispensed in total efficiency thanks to the perfect coverage of airless atomisation for finishing large surfaces in a shorter time. This airless anticorrosion spray unit, Atex certified, thanks to the quality ...
LARIUS SRL
Flow: 3 l/min
Pressure: 6.5, 260 bar
Weight: 25 kg
... medium-solid products to dispensed in total efficiency thanks to the perfect coverage of airless atomisation for finishing large surfaces in a shorter time. This airless anticorrosion spray unit, Atex certified, thanks to the quality ...
LARIUS SRL
Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C
... The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...
Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C
... Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, ...
Flow: 188 m³/h
Head: 22 m
Power: 11 kW
... ELECTRIC PUMPS FOR SWIMMING POOLS Self-priming electric pump for swimming pools with large prefilter which, alongside its excellent hydraulic performance, also offers impressive filtration capacity. ...
Flow: 24, 13.86 l/min
Head: 10 m
Power: 50, 45.8 W
... , Gas Boiler Heat Pump ● Radiant Floor Heating, Wall-hung Boiler ● Wall-mounted solar water heater ● Dedicated pump for pressure-bearing water tanks ● Engineering separated type water heater ● Pressure-bearing piping ● ...
Flow: 29, 17.7 l/min
Head: 12 m
Power: 58, 57.8 W
... , Gas Boiler Heat Pump ● Radiant Floor Heating, Wall-hung Boiler ● Wall-mounted solar water heater ● Dedicated pump for pressure-bearing water tanks ● Engineering separated type water heater ● Pressure-bearing piping ● ...
Flow: 0.02 l/min - 0.5 l/min
Fluid temperature: 41 °F - 113 °F
Length: 3 in
... VAPex personal sampling pump has outstanding back pressure capability. This capability ensures a uninterrupted smooth operation of the pump in even the most demanding situations. Do not worry about battery life either. ...
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... get good wear resistance, and high efficiency. High chromium alloy is applied to the pump material, and the variable wall thickness design is used for the large size parts. It is the combination of mechanical seals ...
Flow: 200 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m
... UP10 pump makes the difference through: · HIGHER EFFICIENCY. Maximum fluid flow with reduced air consumption. · INCREASED RELIABILITY. No stall, no icing, reliable start-up and longer air valve and diaphragm lifes. · MAXIMUM VERSATILITY. ...
SAMOA Industrial, S.A.
Flow: 250 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... Very reliable diaphragm aluminium pumps for large volume transfer dispensing and evacuating a variety of fluids. These pumps have an aluminium air motor. Typical applications for these pumps ...
SAMOA Industrial, S.A.
Flow: 16.5 l/min
Pressure: 490 bar
Fluid temperature: 20 °C
... piston pumps. High pressure double acting pump for use in applications that require extra pressure output or when cold temperatures a low air pressure could limit pump performance. Pumps ...
SAMOA Industrial, S.A.
Flow: 0 m³/min - 12 m³/min
Head: 0 m - 50 m
Power: 37, 75, 55 kW
... is a high-powered heavy-duty slurry pump that delivers high head and high volume discharge. It is designed and built for continuous operation under the rough conditions often found at large-scale construction sites and ...
Flow: 35 l/s
Pressure: 10 bar
Head: 30 m
... Pump with a hybrid impeller. Combines the advantages of our semi-open impeller with those of a Turo® vortex impeller. Suitable for the transport of fluids with high gas content and large diameter solids. Applications - ...
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
... pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil tank capacity is 25L and oil flow ...
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... the efficiency of the large high-pressure pump is higher than that of the small high-pressure pump, so energy saving From a point of view, it is better to choose one large ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... because one large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large ...
Tinajin Harvest
Flow: 246 l/min - 510 l/min
Pressure: 40 bar - 240 bar
Power: 30 kW - 110 kW
... because one large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large ...
Tinajin Harvest
Flow: 0.3 m³/h - 90 m³/h
Power: 0.55 kW - 37 kW
... VISCOSITY MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, driving ...
Flow: 5 m³/h - 30 m³/h
Head: 10, 15, 18, 20 m
Power: 1.5, 4, 5.5, 7.5 kW
... CIP self-priming
pump adopts acid-resisting stainless steel (AISI 316) in valve body,
which has unique acid and alkali resistance, and comply with sanitary requirements for foods.
As a positive displacement
pump, ...
Flow: 15 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 45 m
... run dry without damaging it •The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber •Can be operated by small power packs or by the hydraulic circuit of mini ...
DOA Hydraulic Tools Srl
Flow: 30 l/min - 3,000 l/min
Pressure: 17 bar - 210 bar
Length: 400 mm
... without damage indefinitely • The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber • Can be operated by small power pack or by the hydraulic circuit ...
DOA Hydraulic Tools Srl
Flow: 50 l/min - 5,500 l/min
Pressure: 17 bar - 350 bar
Length: 500 mm
... • Pump everything! The shearing impeller can shred and pump branches, algae, rags, ropes, bags and solid objects with dimensions up to 55 mm • High performance, weight/size/power ratio unmatched by other types ...
DOA Hydraulic Tools Srl
Flow: 70 l/min - 101 l/min
Pressure: 20, 50, 30, 40 bar
Power: 0.6 kW - 9.2 kW
... diaphragms in NBR (Desmopan® and Viton available on request). Parts in contact with spray liquid: brass. Standard: pressure accumulator and safety valve. On request: PTO protection. Available versions with adjustment valves and pressure gauge and ...
COMET Spa
Flow: 106, 90 l/min
Weight: 9.09 kg
... GEMINI 88 PLUS DUAL RATE SYRINGE PUMP DUAL RATE INFUSION/WITHDRAWAL PUMP KD Scientific offers the NEW Gemini 88 Plus Dual Rate Syringe Pump. This unique pump is really two pumps ...
Flow: 0 l/min - 945 l/min
Head: 0 m - 23 m
Power: 3.8 kW
... Torpedo Pump G1275 CLAW THROUGH THE TOUGHEST SITUATIONS WITHOUT FAIL QED G1275 slurry and solids pumps are built to handle conditions which make other pumps fail. Constructed of stainless steel and ...
Flow: 4.1 l/min
Pressure: 4,100 bar
Power: 37 kW
... The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier Pumps. Dependable and easy to maintain, the HERO 50 can cut and trim a large array of ...
JET EDGE
Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar
... Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation ...
WANGEN PUMPS
Flow: 3.5 l/min - 6 l/min
Pressure: 0.2 MPa - 1.15 MPa
Length: 209, 272, 210 mm
... controls and production rates on large commercial pure water machine for 800-1000 people. Features of 24VDC 800GPD RO Booster Pump *High water preventing level. *Compliant with CE, Rohs, CQC certifications. * Large ...
LEFOO Group
Flow: 800, 500 m³/h
Pressure: 10 bar
Head: 100 m
... Self-priming centrifugal pump to EN 733 (DIN 24255), Vertical or Horizontal Standardized and modular design Self-priming Built-in vacuum pump with external adjustment Large ...
Johnson Pump
Flow: 14 m³/h
Power: 1,100 W
Fluid temperature: 110, 80 °C
... and vibration-free operation. Submerged setup Designed to operate only in the bath, this pump can run dry without deterioration. It also allows for large bath level variations. ...
Siebec
Flow: 12.25 l/min - 42.8 l/min
Pressure: 6.9 bar - 103 bar
Fluid temperature: -46 °C - 121 °C
... displacement gears, these pumps are configured to provide optimum flow with 4-pole motor speeds not exceeding 1750rpm. These designs allow for large plant systems to use common motors across a wide range of products. GNH ...
Micropump
Flow: 4 l/h - 1,020 l/h
Pressure: 0 bar - 16 bar
Fluid temperature: 5 °C - 80 °C
... feedback). The pump is fitted with a 0 – 20 mA analogue output. The MEMDOS LA is compatible with all conventional control systems. The pump is also fitted with a level input, can evaluate suction lines ...
Flow: 44.4 us gal/h - 855.9 us gal/h
Pressure: 43.5 bar - 145 bar
Power: 0.25 kW - 1.5 kW
... LK Series metering pumps are motor-driven, mechanically-actuated diaphragm metering pumps. This larger Series can achieve outputs up to 856 GPH (3240 l/h) and maximum pressures of 220 PSI (1.5 MPa). The LK Series is ...
Flow: 3 ft³/h - 1,817 ft³/h
Head: 1.5 m - 88 m
... Fairbanks Nijhuis submersible dry-pit solids handling pumps have over 40 years of proven experience in the pumping of solids, slurries, sludge, pulp, trash, sewage and grit. These pumps are specifically designed to ...
Fairbanks Nijhuis
the best suppliers
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group