- Production Machines >
- Forming Machine >
- Manual press
Manual presses
Force: 600 kgf - 2,500 kgf
Opening: 79 mm - 120 mm
Manual Toggle Press Clamp (WDS 4043) (Available)£94.33 - £352.93 Each WDS 4043 Type - Toggle Presses MATERIAL Frame: S.G. Iron Clamp Body: Mall. Iron Piston and Handle: Steel For details of ...
WDS Component Parts
... tackle stubborn wrinkles while reducing ironing time by up to 50 percent. With its advanced design and build, a PSP steam press will leave a professional dry-clean finish on all types of garments.
Force: 300 kN
Opening: 0 mm - 150 mm
•The LabManual 300 is a manually operated press especially designed for basic pressing operations and moderate use. •2 column press frame: extraordinarily high parallelism and easy access ...
Force: 50 kN
Opening: 150 mm
Table width: 200 mm
The LabManual 50 is a manually operated press especially designed for basic pressing operations and moderate use. •2 column press frame: extraordinarily high parallelism and easy access ...
Force: 2,000 daN
Weight: 87 lb
■ High operating precision ■ High pressing force ■ Simple operation ■ Designed for use in any kind of pressing of various fitted elements Unit Of Measure: EA
Force: 20,000, 22,000, 30,000 tf
YR27 20000/22000/30000 TON HYDRAULIC PRESS The machine is mainly used for forming large sheet shell such as titanium, stainless steel and heat exchanger platen, etc. It also can be used for forming large cover parts. The ...
SYHP
Force: 10,000, 12,000, 15,000 tf
YR27 10000/12000/15000 TON HYDRAULIC PRESS The machine is mainly used for forming large sheet shell such as titanium, stainless steel and heat exchanger platen, etc. It also can be used for forming large cover parts ...
SYHP
Force: 6,000, 7,000, 8,000 tf
... system and hydraulic system. The electric system is controlled by PLC program. It has centralized button-control system with manual and semi-auto work modes for selection. Work pressure and speed of work feed can be adjusted. This ...
SYHP
Force: 147.1 kN
15 ton Hydraulic Press- Manual Type Welded steel with fast return springs Designed for use with automotive, industrial, and general shop work for pressing, bending, straightening, and assembling jobs. ...
35 Ton Hydraulic Press- Manual type Welded steel with fast return springs Designed for use with automotive, industrial, and general shop work for pressing, bending, straightening, and assembling jobs. ...
LPCZ100 Portable transmission belt press LPCZ100 Easy-to-use portable press for splicing transmisssion belts.
ESBELT
Force: 50 tf
Opening: 136 mm - 1,000 mm
Stroke: 150 mm
Single-acting cylinder manual presses Activated by means of a manual pump. Single-acting cylinder with spring recoil and approximation spindle screw. Solid structure in a monoblock format to ensure ...
MECAMAQ, SL
Force: 3,150 kN
Stroke: 250 mm
... the die, for obtaining high quality products. C-frame mechanical presses are specifically used for blanking and for the manual single-stroke or automatic cycle stamping of small parts. Quality as Standard The ...
... and production. Technical specifications of presses for glove box: From the small manual press used in the crimping of button cells to the industrial press of several tons used ...
Force: 50 kgf - 2,000 kgf
Opening: 0 mm - 45 mm
Stroke: 0 mm - 45 mm
Our percussion pneumatic riveting machines are suitable for: marking - riveting - chamfering - punching pressing - deep drawing - bending - forming Features common to all models: beating force adjustement with one command anti ...
Force: 5 kN
Opening: 40 mm
The EP 500-40 is a manual toggle press with a round ram. The press exert the rated force at the end of the stroke at the bottom dead center. Through this procedure, the high pressure ...
KMT Produktions- + Montage-Technik GmbH
... presses. These presses enable the realization of several assemblies, camberings, and fixings. The series includes two types of press. They are suited for a range of applications. The rack bench presses enable carrying ...
Product Description The single-arm hydraulic press has a C-type structure and is submerged arc welded. After welding, it is treated by vibration to ensure the degree of deformation of the fuselage. The hydraulic system ...
TengZhou Zhongyou Heavy Industry Machinery Equipment Co.,Ltd
Force: 1.5 kN - 30 kN
Pressure range from 1.5 kN to 30 kN Manual lever presses offer high economic efficiency with regard to production processes and batch sizes where automation is not required. In these cases they can be used quickly and ...
ips - Werkzeugtechnik gmbh
Force: 60 tf
Stroke: 1,000 mm
... WITH THREE MANUFACTURING CYCLES: MANUAL, SEMIAUTOMATIC, AUTOMATIC AND WITH BIMANUAL PUSH-BUTTON CONTROL PANEL - LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S ...
AEM3 S.r.l.
Force: 3 tf
Weight: 170 lb
Our AP-3R arbor press harnesses a whopping 3 tons of force. A great value, this sheet metal-forming arbor press will offer decades of profitable duty at full capacity. Features Solid, case-hardened ...
Baileigh Industrial
Force: 12, 25, 30 tf
Opening: 1 in - 7 in
(Model Mini C) Twelve ton manual, two-column hydraulic press with 6" x 6" square platens. Compact and portable, requiring less bench space than our Model C. This press is ideal for constricted ...
Carver Inc.
Simple press with manual operation for various workpieces and materials. The press has a small pitch of the spindle, thus a high pressure is achieved. Technical data: Weight: Approx. ...
Force: 200 kN - 3,000 kN
Table width: 200 mm - 1,300 mm
Table length: 300 mm - 800 mm
Manual/electric hydraulic press lakes the advantages of small size, simple structure, especially suitable for field and frequent power outages of occasions.
Force: 200 tf - 2,000 tf
... Exercising Press, in other words "Spotting Press", is one of the machines needed by mold producers. Especially for automotive molds, after the machining process, in order to get the final part with the ...
Force: 1.5 kN
Opening: 85 mm - 180 mm
... , and thus the clamping pivot is not damaged. * applies only to 4HZPP T-Slot 1 x DIN 650 M8x10 Accessories - GECHTER Manual rack and pinion presses Type 2 HZP, Type 4 HZP (Move the mousepointer in spreadsheet or ...
GECHTER
The manual bagging press is especially designed for 1 operator to weigh and press a load of wipers into a bag (or cardboard box). The press is equipped with an integrated ...
Force: 3 tf
Weight: 67 kg
... Rugged welded plate construction 4.Bronze bushings for long life 5.Can be used as a standard arbor press 6. Accept all bench press and louver press tooling
Weight: 15 kg
Overall length: 250 mm
Overall width: 300 mm
These Cutters are manufactured from high-grade D3 tool steel to give long-lasting cutting-edge sharpness for repeatable test specimens and more accurate test results. The cutters are heat treated several times during the manufacturing ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining