Pressure: 30 bar - 250 bar
Temperature: 80 °C
Flow rate: 8 l/min
... Sequence valve as timer: up to 250 bar, Delay 1-10 s - Absorption of pressure peaks - Delay time adjustable - Large adjustment range - Pressure-independent switching sequences possible - Only one adjustment srcew - Valve ...
DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
... FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand of miniaturization. Many ...
AIGNEP
DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 200 °C
... avoided which can cause sparks and fire in an inflammable/explosive environment Contact safety throughout the entire life of the valve 2. Double antifriction washer Less Breakaway Torque is granted Less wear comparing with the execution ...
OMAL Spa
Pressure: 210 bar
Flow rate: 20 l/min
... The Leak Free Solenoid Valve is specifically designed to provide a good quality performance and functionality. It is built with a sub-plate or screw-in, two-way, poppet style normally used to cut off the hydraulic power. ...
DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: 0 °C - 400 °C
... Nominal diameter DN 15 .200 Nominal pressure PN 16,25,40 Body made of sph. cast iron EN -GJS-400-18-LT, EN-GP-240-GH Bellows seal (TA-Luft') with safety stuffing box High Kvs-values (favorable Zeta-values) High seat tightness External threaded spindle Handwheel ...
DN: 0.5 in - 2 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 95 °C
... overflow valve allows high flow rates at low differential pressure. In its closed, gastight version it is suitable for liquid and gaseous media. Fitted with Viton seals, its range of applications is extended so that it is suitable for ...
DN: 15 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
... In media-separated piston valves, a pivoted lever in conjunction with the membrane fitted on it ensures low-friction power transmission with high tightness. Due to the “lever arm effect”, only a small dimensioned pneumohydraulic drive ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 260 °C
... Thread end connection resilient seated 2 piece ball valve An economical manual operated valve rated to 138 bar/2000 psi Features Robust engineering design High quality Benefits Long service life Bubble tight shut off ...
Metso Automation
DN: 0.5 in
Pressure: 207 bar
Temperature: 149 °C
... Temperature) automatic thermal shutoff valve is used to sense the sample temperature after the sample cooler. Under normal conditions, the valve is wide open so the sample fluid passes through the valve. ...
Pressure: 6,000 psi
... 207bar) PSB4NS-X4 - 6,000psi (414bar) The 4-way multi diverter valves are an economical and safe method of diverting high pressure lines, this replaces several high pressure 2-way valves. Ideal for sampling or vent / ...
Alco
DN: 51, 25 mm
... closes valve for for fuel gas Operation is automatic or semi-automatic Pneumatic control pressure can be air, gas or oil Models for 2 in. or 1 in. (51 mm or 25 mm) fuel gas lines These ...
Pressure: 400 bar
... Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve shuts the flow from P to A ...
DN: 0.5 in - 4 in
Pressure: 300 psi
Temperature: -20 °C - 180 °C
... Screw-in Bonnet, Solid Wedge, Non-Rising Stem BSEN12288, Threaded Ends Comply to BS21 or ANSI 2.1 ...
Taloar
DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F
... Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or solenoid valve. ...
Pressure: 4,500, 2,500, 3,000 psi
Flow rate: 40 us gal/min
... The CROSS SSD4 series selector valves are 6 way, 2-position units with cast-in metering notches for smooth operation. They provide an economical way of diverting flow to two separate hydraulic circuits. Features: SSD4: ...
Pressure: 15 bar
Flow rate: 1.6 l/min
... The adjusting valve is built into a junction, which is produced from an extruded light alloy aluminium bar. The device (quite simple and cheap) is particularly suitable for the distribution of oil in lubricating systems. For ...
Dropsa spa
Pressure: 250 bar
Flow rate: 80 l/min
... EDF*M COMPENSATED PROPORTIONAL FLOW CONTROL VALVES Description EDF03M and EDF05M are direct operated normally closed proportional flow control valves with pressure compensation. These valves are subplate ...
CONTINENTAL HYDRAULICS
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon steel PN 40 - ...
Mival
DN: 0.375 in
Pressure: 10,000 psi
Flow rate: 7 us gal/min
... extended lengths of hydraulic hose. Operation: Controls surges by restricting flow if it exceeds 7 gpm. When flow subsides, valve reopens automatically. Has 3/8" NPTF male end to thread into return port of system ...
... in the oil and gas industry, i.e offshore on an oil platform. The valve is designed to maintain optimal tightness and function even in the event of a fire. This prevents flamable media from leaking ...
... Ball valves are long lasting and can work perfectly even you are operating it for years most especially the metal-seated ball valves which can meet the highest requirement. It is recommended for shut-off applications ...
FAMAT
DN: 15 mm - 40 mm
Temperature: 225 °C
... KTM full bore Class 600, 900 & 1500 fire-safe and anti-static, high pressure ball valve for the chemical and petroleum industries Ideally suited for use in the oil and gas production, refining and ...
Pentair Valves & Controls
DN: 0.125, 0.25, 0.18 in
Pressure: 10, 160, 300 bar
Temperature: -20 °C - 80 °C
... The PVB Divider Valve is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease. For ...
BIJUR DELIMON INTERNATIONAL
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 50 l/min
... pilot operated pressure control valve with electric proportional control and mounting interface in compliance with ISO 4401 (CETOP RP 121H) standards. — It is suitable to modulate the pressure in hydraulic circuits. — ...
Duplomatic Oleodinamica
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 90 °C
... series is manufactured by Sferaco, and is a wafer-type butterfly valve that is integrated with a long neck for isolation. The unit also incorporates an ISO 5211 mounting pad. The body of the valve is rilsan-coated with ...
SFERACO
DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min
... Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit: the valve is open from ...
DN: 0 mm - 10,000 mm
Pressure: 14 bar
Temperature: 71 °C
... Lubricating oil
Optional extras
- Tilt position switch
- Low‑level installation kit
- Manual
DN: 50 mm - 800 mm
Pressure: 25, 40, 10, 16 bar
... Di Nicola manufactures hydraulic control globe valves for upstream and downstream pressure regulation , flow regulation and level control in tank . The body is made of ductile iron EN GJS 400 or carbon steel ASTM 216 ...
DN: 13 mm - 25 mm
Temperature: -20 °C - 100 °C
... Gemels is a stainless steel, two-way ball valve that is equipped with ball seats with a size range of DN13 to DN25. This valve operates under pressure up to PN210 and PN420, determined by the seal materials and valve ...
Gemels S.p.A.
DN: 0.25 in
Pressure: 3 bar - 200 bar
Temperature: 10 °C - 50 °C
... The Pressure regulating valve is suitable for reducing the material pressure to the required working pressure and for leveling out pressure fluctuations in the material supply of greases, oils and pastes. This ensures ...
Dosier- und Prüftechnik GmbH
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...
Athena Engineering S.r.l.
Pressure: 25 MPa
Temperature: -40 °C - 80 °C
Flow rate: 220 l/min
... trucks, open hydraulic systems, and single-acting cylinders. It has three functions: lifting, stopping, and lowering. The product is equipped with an adjustable relief valve to achieve reliable protection for the entire ...
Weifang Chengfeiyue Hydraulic Machinery Co., Ltd.
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
DN: 45 mm
Temperature: 180 °C
... Stainless Steel 316 Microcast (CF-8M). Piston - Stainless Steel 316. Spring - Steel (SAE 6150) - White Zinc Treatment Cr3+. Media Oils at high temperature, solvent, Silicon fluid , air, LGP, NVG, Di-Es- ter lubricant based,Oxigen and ...
DN: 0.5 in - 24 in
Pressure: 1.6 MPa - 76 MPa
Temperature: -29 °C - 628 °C
... ASME B16.34 Valve body material: WCB/WC9/CF8/CF8M, etc. Flow characteristics: E%/L/Q Leakage level: ANCI FCI-02 IV/V/VI Product Features 1. - Good valve core stability. The sturdy and durable guide cylinder provides ...
DN: 15 mm - 100 mm
Pressure: 16, 40 bar
Temperature: -5 °C - 200 °C
... Two ways single seat – Pneumatic control valve – UNIWORLD Series Valves Type 2000 UNIWORLD Series are designed with flanged connections EN 1092-1 “straight trough” pattern bodies. The different control plugs are suitable ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
... Available with various end connections for easy system integration Specifications : Material: Stainless Steel Type: Gate Valve Operation: Manual (handwheel or lever) Pressure Rating: Depends on exact model specifications Dimensions ...
DIXON GROUP EUROPE
DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 90 °C
... Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C Recommended viscosity 10 ÷ 420 cSt Absolute filitration 25 μm ...
Pressure: 175, 275, 300, 720 psi
Temperature: 32 °F - 160 °F
... operated, pilot actuated automatic control valve for pressure reducing service. The main valve consists of only two parts: a stainless steel body, and an elastomeric liner or control element. Pressure reducing valves ...
DN: 15 mm - 50 mm
Pressure: 800 psi
... Application - Gas Fitting, Oil Fitting Color - Silver Pattern - Plain Power - Hydraulic Pressure - High, Low Features - Blow-Out-Proof, Casting Approved, Durable If you are looking for MNC 3 Piece Forged Steel ...
Marck And Care Engineers Ltd.
the best suppliers