Inner diameter: 0.06 in - 0.25 in
Outer diameter: 0.156, 0.125, 0.375, 0.25 in
Pressure: 45 psi - 210 psi
Polyurethane tubing provides excellent flexibility, resistance to kinking and abrasion, superior memory, elasticity, and resists attack by water, ozone, oil, and grease. Designed for application in medical, dental, and industrial fluid-power ...
Inner diameter: 38 mm - 64 mm
Temperature: -40 °C - 60 °C
The HP Series Plastic Vacuum Hose provides excellent flexing characteristics and abrasion resistance. It is ideal for porous load handling applications that require low to medium vacuum and high air flow. ...
ANVER Vacuum System Specialists
Inner diameter: 19 mm - 76.2 mm
Temperature: -29 °C - 66 °C
High strength fiber reinforced PVC hose cover bonded to coated spring steel helix. The FT Series Vacuum Hose offers excellent flexibility for use with vacuum pad attachments that require ...
ANVER Vacuum System Specialists
Inner diameter: 6.4 mm - 50.8 mm
Outer diameter: 11.8 mm - 60.5 mm
Pressure: 70 psi - 250 psi
Construction FDA approved clear PVC material surrounding a steel wire helix for reinforcement, which can be grounded to make it anti-static. • Full vacuum rating • Non-kinking/non-collapsible • Glass smooth interior ...
ANVER Vacuum System Specialists
Outer diameter: 4, 6 mm
Delivered length: 200, 400, 320, 500 mm
- Protection against hot chips The MS is a flexible metal hose for fluids and air and is available in two sizes. The metal hose is extremely robust and resistant to hot chips, grease, ...
Inner diameter: 1.5 mm - 5 mm
Outer diameter: 2.5 mm - 8 mm
Pressure: 0 bar - 45 bar
Inner diameter: 1 mm - 12.5 mm
Outer diameter: 2 mm - 15 mm
Pressure: 10 bar - 33 bar
MATERIALS POLYAMIDE POLYURETHANE 98 SHORE A PTFE FEP PVC NBR/PVC STANDARD COLORS
Inner diameter: 6, 4, 10, 8 mm
Outer diameter: 12, 10, 8, 6 mm
Pressure: 13, 27, 20, 15 bar
POLYAMIDE SPIRAL WITHOUT TANGS Temperature Range - 40 °C + 70 °C
Temperature: -60 °C - 250 °C
... types as straight, 45° and 90° versions 5 different hose types pre-assembled according to customer specification Characteristics, speciality fittings made of stainless steel 1.4571 tube ...
... range -200°C to +200°C depending on material Matching accessories Combination shears, scissors etc. can crush the tube ends. The SERTO "Hose Cutty" AC 835 is the ideal tool for clean cutting. Conformity PTFE, ...
Inner diameter: 40 mm - 100 mm
Pressure: 6 bar
Temperature: -40 °C - 70 °C
Applications COLLECTOR® FLEX is a further development of the established COLLECTOR® quality hose. The new, integrated plastic helix lends the hose a high degree of flexibility, thereby ...
Inner diameter: 0.063 in - 0.32 in
Outer diameter: 0.125 in - 0.5 in
Pressure: 140 psi - 256 psi
... Yellow, Red, Green, Black, Blue. FLEXIBLE TUBINGS Working temperature: -10°C to +80°C. Hose Hardness: 85 Shore D Rolls: 100 mt. Colours available: Neutral, Yellow, Green, Red, Black, Blue FLEXIBLE ...
Inner diameter: 19 mm - 63 mm
Outer diameter: 28 mm - 77 mm
Pressure: 10 bar - 48 bar
Two-layer hose in thermoplastic PVC, PU, NITRILE RUBBER compound with embedded galvanised steel spiral with polyester yarn reinforcement for suction and delivery of oils, blue diesel, diesel and bio diesel.
MERLETT
Inner diameter: 40 mm - 600 mm
Pressure: 0.09 bar - 9.31 bar
Temperature: -15 °C - 90 °C
Transparent polyurethane pipeline, polyester base, reinforced with rigid PVC antichhoke for the aspiration and promotion of abrasive products, equipped with copper wire that gives it an antistatic character suitable for ...
ESPIROFLEX SA
Inner diameter: 12, 16, 19, 25 mm
Outer diameter: 34, 24, 28, 20 mm
Pressure: 40 bar
Pressure hose manufactured in polyurethane (PU) with thexic reinforcement for industrial robotics, silicone -free. Layers Polyester thread Applications Compressed air, pneumatic, airbrush, cooling circuits, ...
ESPIROFLEX SA
Inner diameter: 40 mm - 152 mm
Pressure: 8, 10 bar
Temperature: -20 °C - 75 °C
Flat hose for transfer and transport of agricultural irrigation and construction at low pressure. Great flexibility and lightness. Easy installation. Applications Transvase, transport and impulse of drinking water, ...
ESPIROFLEX SA
Inner diameter: 70 mm - 254 mm
Pressure: 0 Pa - 1,961.33 Pa
Temperature: -20 °C - 115 °C
Flexible hose produced with exclusive technology by TECNICA SRL made of: – Addivated polyolefin resins film with anti-bacterial and anti-mildew master. – Thermo-insulating coating in netted and closed-cell ...
Tecnica srl
Inner diameter: 70 mm - 254 mm
Pressure: 0 Pa - 1,961.33 Pa
Temperature: -20 °C - 115 °C
Flexible hose produced with exclusive technology by TECNICA SRL made of: – Addivated polyolefin resins film. – Thermo-insulating coating in netted and closed-cell of polyethylene foam. – External protection ...
Tecnica srl
Inner diameter: 40 mm - 500 mm
Pressure: 0.01 bar - 0.5 bar
Temperature: -40 °C - 125 °C
Flexible hose made of a polyurethane (PU-ester) sheet (th. 0.35 mm) and embedded copper steel wire helix with thick pitch. The main characteristic of this hose is its ...
Tecnica srl
Inner diameter: 2 mm - 12.5 mm
Outer diameter: 4 mm - 15 mm
Pressure: 8 bar - 35 bar
... layer hose with two layers, of high quality Polyamide 12 PHL, and one middle layer of special, ether-based Polyurethane modified, to chemically bond without, the use of additional adhesives., PA 12 Ether HF multi-layer ...
MEBRA PLASTIK ITALIA SPA
Inner diameter: 13 mm - 400 mm
Pressure: 0.08 bar - 2 bar
Temperature: -40 °C - 100 °C
Light weight and very flexible Polyurethane ducting Material: Polyester-Polyurethane, clear Single Length: 10 and 15 m Temperature Resistance: – 40° up to + 100° C Applications: Suction and transport of ...
SCHAUENBURG Ruhrkunststoff GmbH
Inner diameter: 40 mm - 600 mm
Pressure: 0.01 bar - 0.5 bar
Temperature: -40 °C - 100 °C
Light weight and very flexible polyurethane hose, antistatic and food proved Material: Polyether- polyurethane/ Spiral: stainless steel wire (material code: 1.4310), clear : Applications: Suction ...
SCHAUENBURG Ruhrkunststoff GmbH
Inner diameter: 20 mm - 500 mm
Pressure: 0.05 bar - 2.3 bar
Temperature: -40 °C - 100 °C
Medium weight and flexible Polyurethane ducting, antistatic Material: Polyester, translucent Applications: Suction of abrasive materials, transport of granules for explosion- endangered areas Properties: Antistatic ...
SCHAUENBURG Ruhrkunststoff GmbH
Inner diameter: 6 mm - 160 mm
... Our Carburetor Pre-Heater Hose - The Ultimate Replacement Solution Direct Replacement for Peak Performance Are you experiencing issues with your vehicle's HVAC control duct hose? Look no further! ...
Inner diameter: 8, 10 mm
Outer diameter: 13, 16 mm
Pressure: 23, 25 bar
Black hose made of special antimigration PVC compound, with polyester fibre textile reinforcement and PVC-P cover. Completely smooth inner and outer surfaces, good resistance to weathering, chemicals, ...
IPL SPA
Inner diameter: 50.8 mm - 102 mm
Pressure: 2.2 bar - 10 bar
Temperature: -40 °C - 50 °C
PVC/NBR hose reinforced with a grey anti-shock rigid PVC spiral. Its particular mixed rubber nitrylic formulation gives it a high flexibility at extreme low temperatures. Its profile ...
IPL SPA
Inner diameter: 25 mm - 203 mm
Pressure: 3, 6, 8 bar
Temperature: -10 °C - 60 °C
PVC layflat hose, with special PVC/NBR liner (black inside and blue outside), with high tenacity polyester textile reinforcement. Very light and easy to handle, it has a high resistance to ageing, UV ...
IPL SPA
Inner diameter: 4 mm - 12 mm
Outer diameter: 6 mm - 15 mm
Tubes – Various materials for different applications – Broad range of colours (e.g. for identifying different mediums) – Roll lengths 25 m, 50 m and 100 m PA12 helical tube, blue colour
ITV
Inner diameter: 2 mm - 18 mm
Outer diameter: 3 mm - 22 mm
Pressure: 19 bar
... materials for different applications – Broad range of colours (e.g. for identifying different mediums) PA-Polyamide – Flexible – Easy to lay – Low weight – Good UV resistance – High abrasion resistance – Water-resistant – ...
ITV
Inner diameter: 4 mm - 11 mm
Outer diameter: 4 mm - 14 mm
Temperature: -35 °C - 60 °C
... .g. for identifying different mediums) PU-Polyurethane – Classic pneumatic tube on polyester basis – High pressure-resistance – Good aging characteristics – Flexible – Good resilience – Good ...
ITV
Inner diameter: 3.2, 6.5, 9.5 mm
Outer diameter: 7.3, 10, 14.8 mm
Pressure: 20 bar
... -PVC hose Design using 4 layers of extra-flexible PE with a high tenacity polyester fibre reinforcement. Applications Antistatic hose specially designed for paint spraying. Sectors of activity Garages, ...
TRICOFLEX
Inner diameter: 6 mm - 32 mm
Outer diameter: 11 mm - 41 mm
Pressure: 12, 15, 20 bar
Extra flexible hose for hydrocarbons transfer. Four layer thermoplastic design, with an inner polyurethane wall. Reinforcement formed of a high resistant polyester fibre textile braiding. Applications Transfer ...
TRICOFLEX
Inner diameter: 12.5, 15, 19 mm
Outer diameter: 18.2, 21.1, 26 mm
Pressure: 10, 9 bar
5-LAYER MULTIPURPOSE HOSE WITH KNITTED REINFORCEMENT. Exterior covering in PVC. With woven polyester fibre reinforcement and two-layer smooth lining. APPLICATIONS Water supply and delivery SECTORS OF ACTIVITY Yachting Swimming ...
TRICOFLEX
Inner diameter: 10 mm - 22 mm
Outer diameter: 15 mm - 28 mm
White monolayer PE-X pipe with blue sheath PP Corrugated protective sheath - blue color
Unidelta S.p.A.
Inner diameter: 2 mm - 12 mm
Outer diameter: 4 mm - 15 mm
Temperature: -60 °C - 260 °C
Series of linear and spiral tubes in Rislan, Polyurethane, Polyethilene, Nylon, and PTFE
Inner diameter: 50 mm - 305 mm
Pressure: 0.03 bar - 11 bar
Temperature: 0 °C - 300 °C
Flexible hose in blended polyester fabric with double PVC coating Flexible hose in blended polyester fabric with double PVC coating ...
Inner diameter: 0.3 mm - 101.6 mm
Outer diameter: 19.5 mm - 110.7 mm
Pressure: 3.1 bar - 48.3 bar
Manufactured in clean room environment Connectors hoses comply with highest biopharmaceutical standards. FDA approved, USP Class VI certified and with product code marking. Made of Silicone, PFA or PTFE our hoses ...
Inner diameter: 3.5 in - 16 in
Outer diameter: 4 in - 19 in
Pressure: 230, 245, 215, 320 psi
Designed for water pipe network rehabilitation. This thermoplastic polyurethane (TPU) coated hose is manufactured in diameters ranging from 4” (DN125) to 20” (DN500). Its ease of expansion helps to adapt ...
Tipsa
Inner diameter: 102 mm - 178 mm
Outer diameter: 109 mm - 187.2 mm
Pressure: 11, 12, 14, 17 bar
... maximum hose elongation and 10% maximum hose expansion. Lining Properties: a. Ultimate Tensile Strength of the lining: Minimum guaranteed value of 40 MPa (5.800 psi). b. Ultimate Elongation: 500% minimum. Abrasion ...
Tipsa
Inner diameter: 25 mm - 305 mm
Outer diameter: 28.6 mm - 315 mm
Pressure: 14, 17, 12, 21 bar
... and cutting. Easy handling, storage & transport, which allows for fast installation and retrieval. 2% maximum hose elongation and 10% maximum hose expansion. Lining Properties: a. Ultimate Tensile Strength ...
Tipsa
Inner diameter: 2 mm - 16 mm
Outer diameter: 4 mm - 20 mm
Pressure: 0 bar - 44 bar
ALPHA AUTOMATISMES Sarl
Inner diameter: 2.5 mm - 10 mm
Outer diameter: 4 mm - 14 mm
Pressure: 0 bar - 15 bar
ALPHA AUTOMATISMES Sarl
Inner diameter: 4 mm - 8 mm
Outer diameter: 6 mm - 10 mm
Pressure: 12 bar - 67 bar
ALPHA AUTOMATISMES Sarl
Temperature: -30 °C - 100 °C
Product details Materials: Nylon PA6, PP; PA6 -V0, PP ( Polypropylene)-V0 Working temperature: -30℃ to 100℃, short time can up to 110℃. Style: Closed and opened Property: Good flexibility, twist resistance ...
Inner diameter: 3 mm - 25 mm
Outer diameter: 8.5 mm - 33.3 mm
Pressure: 6.9 MPa - 34.5 MPa
Thermoplastic Elastomer Hose Application: Automobile, Engineering machinery, Lathe, Agriculture machine, Mining, Spurting the oil paint, Avigation & spacefight, Cooling and other hydraulic control system. Tube: Oil-resistant ...
Inner diameter: 4.8 mm - 25.4 mm
Outer diameter: 10.3 mm - 34 mm
Pressure: 10.5 MPa - 27.4 MPa
Hose Construction Inner Tube: nylon Reinforcement: one or two synthetic fiber braid Outer Layer: black or other color polyurethane Suitable to transfer petroleum and water based hydraulic oil, which could be used ...
Guangzhou YuBen Hydraulic Technology Co., Ltd.
Please specify:
Help us improve:
remaining