- Hydraulics - Pneumatics >
- Hydraulic and Pneumatic Actuator >
- Pneumatic actuator
Pneumatic actuators
Torque: 0 Nm - 10,000 Nm
Ambient temperature: -55 °C - 150 °C
... SERIES This is the result of the Air Torque SpA mission to offer always innovative products by combining the long field experience as market leader, the innovational spirit, the well-known reliability in actuators ...
Air Torque
FEED ESCAPEMENTS DESTACO's Robohand Feed Escapements are the most effective mechanism for separating components fed from a track or conveyor. Robohand feed escapements feature a fail-safe mechanism to prevent both fingers from retracting ...
DE-STA-CO
Torque: 1.9 Nm
These new DIRECTCONNECT, flange mount rotary actuators, allow the payload inertia to stop directly through an independent hard stop mounted in the turntable, rather than through the drive mechanism. Infinitely adjustable ...
DE-STA-CO
Torque: 0.9 Nm
These new DIRECTCONNECT, flange mount rotary actuators, allow the payload inertia to stop directly through an independent hard stop mounted in the turntable, rather than through the drive mechanism. Infinitely adjustable ...
DE-STA-CO
Stroke : 12 mm - 40 mm
Centering boss and locating hole for accurate positioning. Operating range of table is 0°~190° by angle adjusting screw. Compact design using double rack and single pinion. Hollow shaft standard for wiring and piping. ...
Mindman Industrial
Tube I.D.: φ16, 20, 25 (mm), 4 to 10 times more allowable kinetic energy (compared with internal shock absorber type).
Mindman Industrial
Tube I.D. φ63 mm. Compact body. Functional design with clean appearance. Simple mounting of sensors.
Mindman Industrial
Stroke : 25.4 mm - 101 mm
Pressure: 1.4 bar - 8 bar
Force: 111 N
... Benefits *Compact lightweight unit with built-in air cylinder. *Linear ball bearings ride on precision hardened ground steel shafts. *Units are permanently lubricated for non-lube air ...
AGI Automation Components
Stroke : 5 in
Pressure: 1.4 bar - 8 bar
Force: 222 N
... Benefits *Compact lightweight unit with built-in air cylinder. *Linear ball bearings ride on precision hardened ground steel shafts. *Units are permanently lubricated for non-lube air ...
AGI Automation Components
Stroke : 8 in - 132 in
Pressure: 26 psi - 101 psi
Speed: 2 in/s - 16 in/s
Features & Benefits *Magnetically coupled cylinder is designed to be leak free due to no mechanical connection between the piston and the body. *Prelubricated for miles of maintenance-free travel, with easily ...
AGI Automation Components
Stroke : 50 mm - 1,000 mm
Pressure: 10 bar
Fluid temperature: -40 °C - 150 °C
Bottom hole size is in conform to IS05211, DIN3337. Constructional style: 2 sections Start and ending position:±5° Lockable at anywhere Cylinder Material: Alloy Aluminum, anodizing Output axle: 45# electroplate Assemble ...
Stroke : 50 mm - 1,000 mm
Pressure: 10 bar
Fluid temperature: -20 °C - 150 °C
... Action style: Single and Double Start and ending position:±5° Lockable at anywhere Output axle: 45# electroplate Piston material: alloy alumimum anodizing Assemble with: Ball valve, Butterfly valve, Rotary valve.
Stroke : 300 mm - 1,300 mm
Pressure: 20 bar
Fluid temperature: -40 °C - 125 °C
... Material: Carbon steel Output axle: 45# electroplate Piston material: 45# electroplate Installable Accessories 1.Solenoid Valve 2.limit Switch 3.Positioner 4.Defend Valve 5.Pneumatic ...
Torque: 4 Nm - 4,000 Nm
Rotary Actuator • Available in sizes 40 mm to 300 mm • Torque range 4Nm to 4000Nm • Compact Rack & Pinion design. • Hard anodized aluminum body. • ISO 5211 & Namur Standard mounting
Stroke : 50 mm - 420 mm
Pressure: 6 bar
Torque: 12 Nm - 10,025 Nm
Pneumatic Quarter Turn Actuators SPA-R are ideal for trouble-free, modular automation of process valves such as butterfly, plug and ball valves or as a control unit on reactor sampling systems. Main ...
When pressure is applied to opening "2", both pistons move apart from their basic position of 0° and move into the 90° switch position. The force from both pistons is transferred onto the pinion „C" via the toothed rack. If the pistons ...
Bore: 50 mm - 100 mm
Pressure: 0.1 MPa - 1 MPa
Ambient temperature: 0 °C - 60 °C
The NCRA1 series is a rack & pinion rotary actuator, which offers very high torque-to-size and accurate positioning. Rail type mounting allows switch position to be easily adjusted. Bore sizes available include 30, 50, ...
Force: 12.5 kN - 100 kN
... SDA is a rigid but modular direct drive linear actuator. The actuators can operate with faster linear speeds and higher duty in high load conditions. The SDA can be used as a single drive linear actuator. ...
Pressure: 22, 29 psi
Force: 25, 30 N
Ambient temperature: 5 °C - 60 °C
... Sensor Options Available in four sizes, the FRB Series Rotary Actuator is rated up to 33 in-lb of force and offers rotation angles of 90, 180 and 270 degrees. This vane-type actuator includes standard ...
FABCO-AIR
Torque: 0.35 daNm - 7.7 daNm
Rotation angle: 90, 180 °
Ambient temperature: 5 °C - 60 °C
PNEUMATIC SWIVEL AND TURNING UNIT These rotary actuators has a particular compactetion and ruggedness, the hight torque and the stroke dispositives of regulation and deceleration. Spindle rotation, supports ...
Pressure: 2 bar - 8 bar
Torque: 2 Nm - 13,040 Nm
Ambient temperature: -40 °C - 160 °C
... to meet the current requirements of the valve market and together with the bar-agturn we have developed a new pneumatic quarter-turn actuator for our diverse customer groups. Thanks to its special ...
Torque: 0 Nm - 2,528 Nm
Bettis D-Series Pneumatic Rack and Pinion Valve Actuator New Rack & Pinion E Series (RPE) – is now available here. RPE is a newly-enhanced product and replaces D Series actuators with ...
BETTIS
... to function and accessibility. HOW ARE SOMAS ACTUATORS USED? When a valve needs to be operated remotely, or is frequently used, it needs to be fitted with some type of actuator. Pneumatic ...
SOMAS
Torque: 13 Nm - 600 Nm
... High Load Pneumatic Rotary Actuators feature exceptional radial and axial bearing loads and high stopping capacity. Large pinion shaft, bearings, and rack provide heavy duty performance, and optional ...
PHD, Inc.
Stroke : 0 in - 205 in
Force: 86, 193.5, 346.5 N
The BC2 pneumatic band cylinder, Tolomatic's first band-type cylinder design, continues to be a solid performer for a wide variety of pneumatic applications. BC2 pneumatic band cylinders ...
Tolomatic, TOL-O-MATIC
Stroke : 13 mm
Force: 0.45 kN
The Airomatic™ polyactuators are Firestone Industrial Products Company's newest line of pneumatic actuators. The Airomatic™ polyactuator product line is fabricated of molded plastic elements welded together ...
... Wherever linear movements are required, the Uhing®-linear drive nuts are a state-of-the-art alternative to hydraulic and pneumatic actuators, chain feeding systems and lead screws.
Spacial drives Duo 96 ø 50 with lock unit - our Hercules with powerlock.
Stroke : 50, 100 mm
Pneumatic actuator model APN32100 developed by Sonic Italia integrates containment clamps that allow the ultrasound system 30 khz, 35 Khz, 40 Khz anchoring on the non-vibration nodal points. The pneumatic ...
SONIC ITALIA S.R.L.
Bore: 25 mm - 100 mm
Pressure: 2 bar - 12 bar
Ambient temperature: -10 °C - 85 °C
The new Rotary actuator “T” series is interchangeable with the “R” one and represents the Farbo’s attention in providing new benefits to the customer ever developing new products. Thanks to standard accessories and seals ...
Pressure: 10 bar
Torque: 18 Nm - 1,702 Nm
Ambient temperature: -40 °C - 80 °C
Pneumatic rotary actuator USAGE Throttling service On/off service Pressure swing adsorption (PSA) ACTUATOR MOTION RATED ANGLE 90° SUPPLY Pneumatic VERSION Standard FAIL-SAFE ...
Pfeiffer Chemie-Armaturenbau GmbH
Pressure: 2 bar - 8 bar
Torque: 4.6 Nm - 13,024 Nm
Ambient temperature: -40 °C - 150 °C
Indicator A position indicator with Namur mounting is standard on all NUTORK pneumatic actuators for mounting accessories. Pinion The hardened alloy steel pinion is precision ground and Nickel plated ...
Nutork Corp.
Stroke : 150 mm - 1,000 mm
Force: 200 N
Speed: 2,000 mm/s
*Durable, cost-effective alternative for pneumatic and hydraulic cylinders and expensive rod style actuators *Zero backlash belt to pulley design *Extruded base profile allows multiple side mounting ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining