... installation time. • Reduced on-site labour cost. • Trouble free commissioning • Optimum inside free space allocation • Single unit responsibility • Single manufacturing source • Pre-connected internal piping • Complete ...
naffco
Flow: 1.5 m³/h - 75 m³/h
... pressure switch or pressure transducer), a control system and a hydraulic accumulator. Pumping units ZHI and ZHJ feature OPA and OPB (upgraded OPA) pumping units. Support structure The ...
Flow: 0 l/min - 327 l/min
Pressure: 0 bar - 1,000 bar
... The pumping group PF 190 is composed of the following components: Horizontal plunger pump PF 190, with assisted or splash lubrication, complete with pressure gauge and flanges Safety valve Coupling with cover Frame Suction ...
... High Pressure air operated hydraulic pumping systems are complete, selfcontained units and ready to operate. Just hook up standard shop air supply (maximum 100 psi) to connection supplied on the side ...
HIP
Pressure: 400 bar
... Air Driven Hydraulic Pump Unit • - The hydraulic pump is driven by air. Once the hydraulic pressure reaches the pressure setting, it stops pumping which is energy saving. Meanwhile, if the working ...
... GAS ELIMINATION DEVICE Air detection system for electric pump without pump stop. Electric, self-priming gear pump for the supply of oil (without automatic pump stop), approved for fiscal transactions according to the European Directive 2004/22/EC, ...
... • MAS-VSP Automatic self-priming unit with vacuum pump, designed for the priming of centrifugal pumps where dry running is not admissible. It quarantines reliable priming. If the discharge pressure falls during operation, the aspirator ...
The RDC 008 series, manufactured by RDC Rodicar, is a mobile equipment drum specifically designed with a regulator and 1/2 hose containing 2 m height. In addition to that, the equipment drum is suitable for use in agriculture, food manufacturing, hospitality, ...
RDC Rodicar
Flow: 5 l/s - 1,000 l/s
Power: 5.5 kW - 200 kW
Fluid temperature: 80 °C
The water pump group driven by diesel engine for emergency / fire fighting is a high-tech product It is integrated with microprocessor and computer technology, industrial automation control technology, telecommunication technology, modern mechanical design ...
Flow: 45, 10 l/min
Pressure: 160, 175 bar
Length: 1,750 mm
... reaming had (PUD) or powered cutting head (PPS). The PERFORATOR HS hydraulic power units are equipped with an additional hydraulic circuit for the BMA 2000, which makes another power unit superfluous. ...
Flow: 0 l/min - 1.4 l/min
Pressure: 10 bar - 200 bar
... The high-pressure delivery unit HPCU 200 enables a liquid supplied under a pre-pressure of approx. 2 to 4 bar to be modulated and conveyed to a pressure of up to 200 bar. Part of the system is an electric motor with frequency converter, ...
Flow: 11 l/min
Pressure: 8 bar
... Electric gear pump system EP 100 for 200 l drum with 4 m delivery hose DN 12 oil pump EP 100, steel suction tube for 200 l drum with 2" drum adaptor and foot valve, 4 m delivery hose DN12 (1/2") with swivel nut with oil control gun with engine ...
... be used with waste waters. GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs. GEOCOMP Macerating pumping system. It is possible to install a complete bathroom in a basement conversion or loft extension. The GEOCOMP ...
Flow: 1,368 m³/h - 3,060 m³/h
Series EHM slurry pumps are widely used in the mining, coal washing, power plant, metallurgy, petrochemical, building material, dredging, and other industrial departments, etc.
Flow: 0 l/min - 0.2 l/min
Pressure: 0 Pa - 1,000,000 Pa
... Features Transferring of large volumes of chemical solution at a constant flow Transferring of high-viscosity slurries Sanitary piping for easy disassembly, cleaning, and assembly Flow monitoring and control functions Explosion proof specification Application ...
TACMINA CORPORATION
Flow: 500 us gal/min - 3,000 us gal/min
... ApplicationsFire-protection of buildings and other built infrastructure DescriptionThe Horizontal Split-Case (HSC) FirePak offering features the full range of Armstrong HSC fire pumps, electric or diesel-driven, and controller. All mounted, piped, and ...
S. A. Armstrong Limited
Flow: 190, 13.5, 51 m³/h
Pressure: 319, 659, 502 bar
... For over 30 years Peroni has been designing and manufacturing complete pumping systems for chemical injection and dosing units, for pumping stations, pipeline testing units, ...
Reciprocating piston pumps generally very efficient and are suitable for high heads at low flows. Reciprocating pistonf pumps are self priming as it can draw liquid from a level below the suction flange even if the suction pipe is not evacuated. Piston ...
Flow: 10 l/min - 250 l/min
Pressure: 70 bar - 250 bar
... Three-es manufactures pumping units with various flow and pressure characteristics, optimised for any washing system. Each pumping unit is assembled using only high quality components. Three-es ...
Three Es
Pressure: 7,000 Pa
... is composed of turbine molecular pump and disk tractor pump. • At the same time, it has the characteristics of high pumping speed, high compression ratio of turbine molecular pump and tractor pump, extending the scope of compound ...
... HYUNDAI SUBMERGED CARGO PUMPING SYSTEM based upon hydraulically driven submerged cargo pumps, is used for chemical and product carriers, crude carriers, FPSO units and others. The system is designed for ...
Flow: 0.1 m³/h - 5 m³/h
... flexibility, efficiency, and full containment, allowing you to transfer powders into multiple receiving vessels with a single, mobile unit. This makes them ideal for R&D facilities, CDMOs, and flexible production environments where investment ...
Flow: 35 m³/h
Pressure: 0 mbar - 400 mbar
Length: 550 mm
... • DILO couplings DN20 • Fixing and steerable rollers • Different wrenches • 3 m long electrical connecting cable • Paint: orange (RAL 2004) • Operating manual The mobile suction pump allows upgrading old SF6 maintenance devices. Thus it is possible ...
Pressure: 0 mbar - 400 mbar
Length: 550 mm
Width: 430 mm
... Standard version • DILO couplings DN20 • Fixing and steerable rollers • Different wrenches • 3 m long electrical connecting cable • Paint: orange (RAL 2004) • Operating manual The mobile suction pump allows upgrading old SF6 maintenance devices. ...
Flow: 600 l/h - 3,000 l/h
Pressure: 6 bar
Power: 3.5 kW - 105 kW
... Direct and mixed – 1″ connections Pump units are supplied with right inlet and left outlet; they can be reversed during installation, except for the code GR1M Included insulation COMPARATO’S SYSTEMS optimize ...
Comparato Nello S.r.l.
Flow: 2,100, 1,400, 1,900 l/h
Pressure: 6 bar
Power: 3.5 kW - 63 kW
... SEPARATOR DIRECT ZONE, MIXING FIXED-POINT ZONE AND MIXING MODULATING ZONE WITH WEATHER COMPENSATION REGULATION POWER SUPPLY 230V 50Hz ...
Comparato Nello S.r.l.
Flow: 11 m³/h
Length: 125 mm
... 1″1/4 connections Span 125mm Power supply: 230V 50/60Hz Reversible They are supplied with outlet on the right side and return on the left side Insulation included ...
Comparato Nello S.r.l.
Flow: 5 us gal/min - 100,000 us gal/min
Pressure: 0 bar - 250 bar
Fluid temperature: -40 °C - 200 °C
... industries, the Integral Pumping Module (IPM) is different as it functions at a high level of efficiency and at the same time it is small, compact, and versatile. The IPM brings together all the necessary pieces that are essential ...
Flow: 0.66 m³/h - 0.9 m³/h
Pressure: 110 bar - 200 bar
Power: 2.2 kW - 5.5 kW
... Product description
Professional motor-pump
unit supplied pre-assembled and tested. Designed for industrial cleaning and workshop applications, the
unit is compact and easy to position, allowing effective and ...
Thermal Care offers a complete line of pre-engineered tank systems for cooling tower and central chiller applications with the highest quality design and construction features available. Standard, full sized pump trim, extended pump suctions legs, welded ...
Thermal Care, Inc.
... We supply the driving unit as a complete component in the highest quality and delivery reliability. ...
Flow: 200 l/h - 5,000 l/h
... Station: The fuel transfer unit that provides the transfer of fuel from the main tank to the daily tank or from the daily tank to the fuel preparation station. Heavy Oil Heating Pumping Station: The filtering-heating- pumping ...
Pressure: 30, 20 bar
... high-performance unit, for large underground shotcrete works. Practical and easy to use, TSB is the ideal solution for medium and large section galleries and tunnels. Designed for heavy working conditions, highly resistant to operating ...
... of fire pumping units. All pump rooms are equipped with the mandatory components to make the entire room compliant with the UNI 11292/19 standard. Technical features Technical compartment box for installation of ...
Flow: 30 l/min
Power: 0.55 kW
Length: 350, 500 mm
... used in confectionery as part of a chocolate-glazing machine. Principle of operation: Design of blade pumps allows pumping of pre-heated glaze. The pump is heated by a water chamber. This pump design eliminates glaze ingress into ...
Fluid temperature: -40 °C - 50 °C
... The ROTAFLEX pumping units is the patented product of Weatherford of American. It has mixed together major features and advantages of all kind of pumping units through years of research ...
Flow: 36 m³/h
Head: 18 m
Length: 490 mm
... Self-priming time(s/4m) 80 Mode HP170F(E) Type Single cyinder- 4-stroke, air-cooled, vertical, diesel engine Starting fashion Manual or electric start Fuel tank capacity(L) 2.5 Continuous running time(h) 2.5 Package Size LxW xH(mm) 500x420x525 ...
Pressure: 2.5, 1.5, 15 bar
... AP motor pump unit is available in a variety of engine powers and pump capacities, both high and low pressure and with or without low-noise cover. The low pressure version is used to transport water (1 à 2 bar) from ...
... design, sturdy solids collecting chamber and container design AWAmaster compact control unit with LCD plain text display Product Description Wastewater pumping units are always used when the discharge ...
Flow: 60,000 l/h
Pressure: 2 bar
... ENGINE: LOMBARDINI DIESEL 15 LD 350 Pump: AUTOASPIRANTE VAC-3 Hose: 3 ” (75 mm.) MAX. height (pressure): 20 m. (2 BAR) Flow rate: 60000 L/H Consumption: 2,1 L/H Tank: 4,3 L. Weight: ...
... Pumping Systems Pumps and hydropneumatics for supply to homes, buildings, subdivisions, industry. Water treatment systems in their different processes. Wastewater pumping. We develop pumping ...
The new SPH1299 UHPLC pump is a robust, precise and easy to use gradient pump. It delivers highly precise flow rates at up to 1300 bar. With its fully automatic compensation of compressibilities and easy handling, the SPH1299 is state of the art. A new ...
Flow: 1 m³/h
Pressure: 1.5, 2.5 bar
Power: 0.37 kW
... Our range of compressor pumps and resevoirs are designed for use in the marine industry. These pressurized water systems can provide either fresh or sea water on board. ...