- Hydraulics - Pneumatics >
- Valve >
- Regulating valve
Regulating valves
DN: 15 mm - 800 mm
Pressure: 40, 25 bar
Temperature: -10 °C - 200 °C
... 1092 full bore KLINGER Ballostar-KHI - 2-piece Ball Valve Ball valve for rough use! For use everywhere reliable functioning is required, where large nominal diameters are used and where minimum pressure ...
KLINGER-SCHÖNEBERG GmbH
Pressure: 0 bar - 300 bar
... INTEGRATED REGULATING VALVE Maximum operating pressure (bar) : 300 Gas compatibility : O2 - Ar - C2H2 ...
DN: 0.375 in - 1.25 in
Pressure: 0 bar - 350 bar
Flow rate: 50 l/min - 350 l/min
Flow range from 50 up to 350 l/min; maximum pressure 350 bar; port size 3/8"-1/2"-3/4"-1"1/4; manual and hydraulic control.
FLUIDEA
DN: 10 mm - 50 mm
Pressure: 50 bar
Temperature: -196 °C - 120 °C
... These cryogenic globe valves have a pneumatic actuator at PN 50. They have a bronze body and stainless steel topwork, with internal parts made from bronze. The actuator can be spring closed, air opened or on the contrary. The gland packing ...
HEROSE
DN: 4 in - 12 in
Pressure: 250 psi
... Iron 250 psig AWWA Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient Wedge Gate Valve is ...
American Flow Control
DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C
... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve featuring an extremely ...
PIETRO FIORENTINI
Defino & Giancaspro
... The Series AD valve is the most popular of Mucons hand operated valve range. The AD is a double diaphragm Iris Valve and is ideal for in-line applications with no leakage to atmosphere. Construction All ...
Mucon
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
... balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted by damping ...
MANKENBERG GmbH
Pressure: 400 psi
... The A-7 is a constant output valve. The majority of Temprite 920R Series coalescent oil separators monitor the oil back to the oil level control via an A-7 pressure-reducing valve set to the desired pressure. NOTE: If ...
Temprite
... immediate installation. Top Line also offers a line of multi-ported divert valves that are very popular in process applications where space considerations are critical. These valves are compact and will significantly ...
Top Line Process Equipment Company
DN: 150 mm - 400 mm
... General purpose of a slide valve is to adjust or fully stop the flow of bulk solid material inside silos, hoppers and similar closed volumes. OZB slide valves are available with square, rectangular and round sections. SVQ: ...
Özbekoglu
Pressure: 5 psi - 2,000 psi
... The Mark 627 is a self-operated, pressure-reducing regulator that provides accurate regulation and tight shutoff on low- or high-pressure systems. Use on air, natural gas, or a variety of other gases. The Mark 627 handles inlet pressures up to 2000 psi ...
JORDAN VALVE
DN: 65 mm - 250 mm
... ● Long cycle life bellows (3000 cycles) in Gr. 321 (stainless) or Inconel. Designed and successfully tested in high pressure/temperature conditions. ● Two-part bellows. ● Two secondary stem seals: a) Backseat in open position; b) Graphite packing. ● Low ...
VELAN
DN: 0.125 in - 1 in
Pressure: 6,000 psi
Temperature: 0 °C - 240 °C
... Type needle valves with hard seat are designed for use on applications requiring complété isolation or throttling of the media. The conical métal tip press fitted ensures perfect alignment for positive bubble tight shut-off. Available ...
DN: 0.5 in
Pressure: 2 bar - 10 bar
Temperature: 75 °C
... of Trident auto-drain valves In the progression of automatic drain valve manufacturing technology, Trident’s condensate sensing type automatic drain valves are the newest. Quintessentially useful ...
Trident Pneumatics Pvt Ltd
Pressure: 20 bar - 200 bar
... Volumetric Metering Valves AXDV-C Ultimate process reliability at lowest dosage volumes – made possible by the new ABNOX Valve. It allows accurate placing of minute quantities of your complex lubricant on your device. ...
ABNOX
Pressure: 1 bar - 8 bar
Temperature: 0 °C - 60 °C
... works together with ZVAB-NC. ● ZVAB-NC provides an air control signal to realize the opening and closing of the control valve and save energy. ...
... Our Series 70 Manual Pinch Valve is the counterpart to the unique Series 75 and has the same design features and advantages, but the heavy cast iron housing is eliminated and a strong fabricated steel body is used in its place. The Series ...
Red Valve
Pressure: 1 bar - 40 bar
Temperature: -10 °C - 150 °C
Flow rate: 800 l/min - 3,500 l/min
... Stainless steel quick exaust valve series Material and components: - body in stainless steel AISI 316 L - o-ring in Viton (FPM) ou PU - other parts in stainless steel AISI 316 Applications : chemical and food industries - working ...
SENGA
Pressure: 70 psi - 260 psi
... self-modulating cooling control valves are temperature actuated, self powered, and applicable to cooling processes using water or other fluids. 56-T Series valves are available in eight different sizes. To ensure dependability, ...
Sterlco
DN: 9.525 mm
Pressure: 0 bar - 40 bar
Temperature: -20 °C - 80 °C
... SINGLE COUNTERBALANCE VALVE FOR OPEN CENTER VBCB OVERCENTER VALVE SIMPLE EFFECT NOT COMPENSATED WITH BANJO BOLT Thanks to the Oleoweb VBCB counterbalance valves it is possible to manage suspended ...
Oleoweb Srl
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C
... resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking the corrosion of the valve in the medium of corrosion of metal materials. The ...
SuZhou KoSa Environmental Protection CO.,LTD
DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi
... • Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction (ASTM B584) • Integral tamper resistant ...
HD FIRE PROTECT PVT. LTD.
Pressure: 300 psi
Temperature: 149 °C
... Overview This valve is installed in the downstream of sampling systems/heat exchanger. The valve responds only to temperature. Under normal operation, the valve is fully open. If the sample temperature ...
the best suppliers
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group