Screw-in fittings

Diameter: 0.13 in - 0.5 in
Operating pressure: 400, 630, 315 bar

T-male stud coupling, male thread BSPT, light and heavy duty series

Diameter: 4 mm - 22 mm
Operating pressure: 0 bar - 150 bar

Universal double cone fittings - 5200 series Areas of application : compressed air, oil, water. Technical features - fittings in brass (no treatment) - maximum working pressure : 150 bar - working temperature : -40 °C ÷ 100°C - ...

Diameter: 0.25 in - 2 in

The 3U Series is an all purpose light weight quality union designed for leak proof operation as it cycles through a wide range of temperatures. The design offers a non-restrictive flow with no variation in pipe diameter in most sizes. ...

Diameter: 2.5 in - 3 in
Operating pressure: 10 bar

TECHNICAL FEATURES: Universal brass joint for rigid pipes in inches. Configuration: MALE, DOUBLE JOINT FEMALE, DOUBLE JOINT FE-PE. Standard threads according to ISO 228. Use: connection of water iron pipes (up to 10bar); • ...

Diameter: 0.25, 0.38 in
Operating pressure: 700 bar

The K series from Europress is equipped with flat face snap and screwed couplers that can quickly be released. They are suitable with EPP products and can be retrofitted with a wide range of couplings that are found on high-pressure hydraulic ...

Diameter: 0.13, 0.25, 0.38, 0.5 in

Diameter: 54 mm - 110 mm
Operating pressure: 10 bar

applicable to the electric fusion connection of a single double-layer impermeable composite pipe into a single-layer impermeable composite pipe; • the terminal joint is provided with the leakage monitoring joint, which is used for the ...

We manufacture high-quality Brass Copper Irrigation fittings in several sizes to fill virtually any irrigation system need. Our high quality and standard range of Brass Copper Irrigation Fittings are reliable, durable and ensure a tight, ...

Diameter: 0.25 in - 2 in

Standard series fittings BSP Fittings BSP Swivel female 60º cone double hex. Mild Steel 1.0737 (or equivalent)

Specification PTFE fittings provide corrosion protection and to ensure media and system purity. Welcome to contact us for quote on your drawing dimensions. All the sizes of PTFE fittings are welcome for quote. Material ...

Diameter: 40 mm - 150 mm

Morsello Inox's Garolla's fittings of the 101 series serve as half rubber hose adapters. They are short, and can be made in sizes: 40, 50, 60, 70, 80, 100, 120 and 150. They can be made out of AISI 304 TIG stainless steel, via cold forging, ...

Diameter: 0.25 in
Operating pressure: 50, 110 psi

Approx Assembled Length” 1ft Kit includes: 1pc ea 1/8″ npt 1/4″ npt, 1/16″Nozzle,1/8″Nozzle,1/4″ Nozzle, 2pc 1/4″ Segment 5.5″ each Materials and Properties: Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: ...

Product name： Top seat Product number： 35-50-3520 Weight： 1.3kg Time on shelves： 2016-10-29 Browsing times： 452

Diameter: 15 mm - 76 mm

Connection - Metric male thread with 60° inner cone LL series Standard - DIN 3863 Application - TE / SN / SC / SN-K / PTFE flexible tubes Material - Steel Surface protection - Zinc-electroplated Note - this version is also available ...

Diameter: 0.125 in - 3 in
Operating pressure: 0 bar - 10 bar

ISIFLO threaded pipe fittings are threaded pipe fittings for use with hemp, thread tape or threat paste. Available in dimensions from 1/8 "up to 4" ISIFLO thread fittings are produced in dezincification-resistant brass. Ordinary pipe ...

Diameter: 32 mm - 75 mm
Operating pressure: 6 bar - 16 bar

- Straight - With rubber washer Material - PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded

Operating pressure: 10 bar

FARBO presents three pieces union series135. This fitting enables to connect or separate bodies or pipe with no need to turn them.

Our connector for rectangular tubes has been designed with 2 cavities for hexagonal nuts. We can supply the part without nuts, or with a nut up, or one nut down, or with the 2 nuts. Please consult us.

Diameter: 13 mm - 100 mm

Flat sealing threads In this way, the connection is particularly durable and can be well maintained. Favourable price/performance ratio With the hose fittings with barb fittings for clamp integration you receive highest quality ...

Easy Installation & Dismantling Product Specification Many different types available Environmental-friendly plated finishes.

Diameter: 2, 4, 3 in
Operating pressure: 150 bar

■Ball locking mechanism ■Non-valved couplers have minimum flow resistance for maximum cooling ■Couplers and nipple are precision machined from solid bar stock. ■Widest choice of end fittings available, including straight, Elbow with ...

Diameter: 4 mm

The grommet hose connectors of the E10 series are mainly used for thick-walled hoses or where there are no push-in fittings for the hoses. The hoses are fastened here by means of hose clamps. Our E10 series is available in four different ...

ABVL Series is designed to prevent industrial accidents. For applications that require maximum flow, the ABVL style is the desired choice.

Diameter: 49 mm - 92 mm
Operating pressure: 5,000 psi - 7,000 psi

New valve design,it can resistance damage from high flow and the pressure of impulse that providing advanced performance. Special nipple design for connecting under pressure,allows connection and disconnection with high residual pressures. ...

Diameter: 0.187 in - 0.625 in
Operating pressure: 0 psi - 400 psi

Ferrules, Nuts and Unions made of extruded brass (CLA-360). Elbows and tee Connectors made of forged brass, for more safety and resistance (CLA-377). Idela connectors for piping systems of gasoline, grease, oil, vacuum, water ...