Diameter: 6.3 mm - 50 mm
Operating pressure: 15,000,000 Pa - 50,000,000 Pa
... Series ANV Features - Connection system: pulling back the sleeve - Disconnection system: pulling back the sleeve - Shut-off system: poppet valve - Connectability: without pressure - Disconnection under pressure: not allowed - Interchangeability: ...
FASTER S.p.A.
Diameter: 10 mm - 32 mm
... Adjustable position cross fitting, from 10-32 external thread, to three 10-32 internal threads. Features Beswick’s trademark O-ring seal design provides a leak-tight joint. ...
Beswick Engineering Co, Inc.
Diameter: 0.125 in
Operating pressure: 0 psi - 150 psi
... Adjustable position 90 degree elbow fitting, from 10-32 external thread to 1/8" OD tubing Features All components, including the release collar, are fabricated from stainless steel, permitting use in corrosive or high temperature environments, ...
Beswick Engineering Co, Inc.
Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi
... Adjustable position 90 degree elbow fitting, from 10-32 external thread to 1/4" OD tubing. Features All components, including the release collar, are fabricated from stainless steel, permitting use in corrosive or high temperature environments, ...
Beswick Engineering Co, Inc.
... Cap nut: Brass with nickel plated Ring: PA6 Ferrule: Aluminium / brass Gland body: Brass with nickel plated O-ring: NBR Connection thread: Metric (EN60423) / PG (DIN 40430) Properties - Easy to assemble - Fixed or swivel body versions - ...
ORTAC
... Cap nut : Brass with nickel plated Ring : PA6 Ferrule : Aluminium / brass Gland body : Brass with nickel plated O-ring : NBR Connection thread : NPT ANSI B1.20.1 Properties: - Easy to assemble - Fixed or swivel body versions - Apply ...
ORTAC
... Liquıd Tight Spiral Conduit Fittings With Cable Holder Cap nut: Brass with nickel plated Clamping insert: PA6 Sealing ring: TPV Ring: Polyethlene Ferrule: Aluminium / brass Gland body: Brass with nickel plated O-ring: NBR Connection ...
ORTAC
Diameter: 4 mm - 18 mm
Operating pressure: 100 bar - 315 bar
MALE STRAIGHT UNION - DIN 2353 - STAINLESS STEEL 316 TI
BENE INOX
Diameter: 4 mm - 16 mm
... MALE CONNECTOR (TAPER THREAD) - STAINLESS STEEL 316 (Model : 5456) ...
BENE INOX
Diameter: 4 mm - 16 mm
... FEMALE CONNECTOR - STAINLESS STEEL 316 (Model : 5459) ...
BENE INOX
Diameter: 0.25 in
Operating pressure: 325 bar
... zinc-plated. Max. operating pressure 325 bar. Since the clamping modules after blow-off of the opening pressure are mechanically locked, the hose is then uncoupled by means of the quick couplings. The advantage of this is that there are no interfering ...
Diameter: 9, 6, 4 mm
... Fittings and caps The fittings described on this page are particularly suitable for connecting vacuum cup holders to their manifolds and in all those cases that require a connection to vacuum sources via smooth flexible hoses with internal diameters ...
VUOTOTECNICA
Diameter: 16, 12, 8 mm
... Spherical articulated joints Our spherical articulated joints are made with hardened steel. Assembled to the cup holders, they compensate offsets, orthogonality and flatness errors that often arise between the cups and the surface of the load to be ...
VUOTOTECNICA
Diameter: 0.125, 0.25, 0.375, 0.5 in
... Ball joint couplings with GSL axial vacuum connection This series of couplings was designed to be installed on suckers with support, especially those that are flat or that have little lip, in order to allow them to easily adapt to the gripping surface ...
VUOTOTECNICA
Diameter: 50 mm - 150 mm
... PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ISO 228 Description, addition to product name - PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ...
Masterflex SE
Diameter: 50 mm - 150 mm
... cast-on PU threaded connector for attaching fittings to Master-PUR Food hoses, approved for direct food contact EU 10/2011, following DIN ISO 228 Description, addition to product name - cast-on PU threaded connector for attaching fittings to Master-PUR ...
Masterflex SE
Diameter: 32 mm - 300 mm
... screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently antistatic Description, addition to product name - screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently antistatic Construction ...
Masterflex SE
Diameter: 0.13 in - 1.5 in
Operating pressure: 345 bar
... The WEH® TW03 quick connector is especially designed for testing components with internal threads. Only hand-tighten the quick coupling into the thread until the o-ring seal contacts the test piece. The TW03 seals without wrenches, sealants or tape. NBR ...
WEH GmbH Verbindungstechnik
Diameter: 16 mm
Operating pressure: 400 bar
... Hydraulic Couplers Fast and clean changes Do you have hydraulic applications where lines are frequently connected and disconnected? Do you want to do this quickly, cleanly, safely, and easily? We have the optimal solution for you: WEH® Flat-Face ...
WEH GmbH Verbindungstechnik
Diameter: 16 mm
Operating pressure: 400 bar
... Hydraulic Couplers Fast and clean changes Do you have hydraulic applications where lines are frequently connected and disconnected? Do you want to do this quickly, cleanly, safely, and easily? We have the optimal solution for you: WEH® Flat-Face ...
WEH GmbH Verbindungstechnik
Diameter: 3 mm - 50 mm
Operating pressure: 1,000 bar
... For permanent pipe connections ■ With weld-on ends on both sides ■ Straight version, angles and Tee form ■ Temperature-resistant from -270 °C up to +650 °C (dependent on the material used) ■ Available for pressures up to 1,000 bar on request ...
DILO Armaturen und Anlagen GmbH
Diameter: 3 mm - 50 mm
Operating pressure: 1,000 bar
... For variable application ■ With weld-on end and screw-in thread ■ Straight version, angles and Tee form ■ Metric, Whitworth or NPT thread ■ Temperature-resistant from -270 °C up to +650 °C (dependent on the material used) ■ Available for pressures ...
DILO Armaturen und Anlagen GmbH
Diameter: 3 mm - 40 mm
... ■ Available as weld-on or screw-in version ■ For pressures up to PN 100 ■ Metric or Whitworth thread ■ Three-part union consisting of weld-on stub, clamping nut and weld-on thread stub or screw-in stub ...
DILO Armaturen und Anlagen GmbH
Diameter: 0.125 in - 0.75 in
Operating pressure: 0 bar - 21 bar
ZRA, ZRB, and ZRC are standard swivel joints that allow a wide range of nozzles to be mounted in the most appropriate direction. Therefore, they are suitable for installations requiring production diversification. The fitting and adjustment of the joints ...
Diameter: 0.125 in - 0.38 in
Operating pressure: 0 bar - 15 bar
ZRP triangular flanged swivel joints have a robust metallic structure, are easy to fit and adjust and are widely used in manufacturing plants requiring product diversification.
... Designed for increased safety and a prolonged lifespan, Elcometer Blast Hose Quick Couplings attach securely to the end of the Blast Hose creating a solid connection and consistent flow. Elcometer Blast Hose Quick Couplings are available in both nylon ...
... Our wide range of Air Distribution Manifold Fittings ensure that your blast system runs smoothly. Elcometer Air Distribution Manifold Fittings include: • Certified Pressure Relief Valves: Designed to discharge the compressed air in the blast machine ...
... Elcometer Air Bull Hose Fittings & Accessories allow safe connection from your air bull hose to your Air Distribution Manifold. Compressed Air Bull Hose Fittings & Accessories Fittings • Couplings: Manufactured out of steel; the air couplings ...
Diameter: 0.375 in - 2 in
Operating pressure: 16 bar
... Union with BSP threaded female ends, O-Ring in EPDM or FKM. Series of fittings for pipes conveying fluids under pressure with threaded joints. ...
FIP - Formatura Iniezione Polimeri
Diameter: 16 mm - 63 mm
Operating pressure: 16 bar
... 90° elbow with reinforced solvent weld socket d and BSP threaded female end R with STAINLESS steel reinforcing ring. Series of fittings designed for conveying fluids under pressure with threaded and cold chemical solvent weld jointing systems (solvent ...
FIP - Formatura Iniezione Polimeri
Diameter: 0.5 in - 4 in
Operating pressure: 15 bar
... Fittings according to british standard - equal socket. Series of fittings for pipes conveying fluids under pressure with solvent weld and threaded joints according to British Standard. ...
FIP - Formatura Iniezione Polimeri
Operating pressure: 1 bar - 60 bar
... STANDARD THREADED FITTINGS Brass nickel-plated fittings with different thread and dimensions. ...
Diameter: 4 mm - 18 mm
Operating pressure: 0 bar - 60 bar
Compression fittings are so defined because the tube closing on the fitting is made by a cutting compression ogive which holds on the tube. Compression fittings are suitable for the assembly of rigid tubes (copper, brass,…); for possible use of “plastic” ...
Diameter: 18.7 mm - 67.5 mm
... Polyamide fitting Protection class - IP 55 Temperature range - -30°C to +80°C Colour - black,grey Variant - PG,Metric ...
HUMMEL
Diameter: 6 mm - 69.3 mm
... Metal fitting Material - Nickel-plated brass Temperature range - -20°C to +80°C Metal fitting S Material - Nickel-plated brass Temperature range - -20°C to +80°C Metal fitting pro Material - Nickel-plated brass Temperature range - -20°C to ...
HUMMEL
Operating pressure: 10 bar
... Coupling T piece Material - Brass blank Max. operating pressure - 10 bar Max. operating temperature heating - 120 °C ...
HUMMEL
Diameter: 0.5, 0.75 in
... Technical Data Connection Size: Thread 1/2"NPT(F) x 1/2"NPT(F) or 3/4"NPT(F) x 3/4"NPT(F) available Body Material: SS316L ...
Diameter: 0.125, 0.25 in
... Clippard bulkhead fittings come with the internal thread of 10 - 32, 1/8 NPT and 1/4 NPT, Thd Mtg. of 15 / 32 - 32, 1/8-27 NPT and 3/4-20. Other specifications include "A" (0.500", 1.000" and 1.000"), "B" ( 0.125", 0.250" and 0.250") and "H" hex (9/16", ...
Clippard
Diameter: 0.125, 0.063 in
... Details #10-32 to 1/8” Tube Connector Notes Use with Copper or Nylon tubing. One-piece ferrule and nut for fast, easy insertion of tube. See Catalog: Page 320 Additional Information Documentation : CA Prop. 65 Gasket : Brass Material : Brass O-Ring ...
Clippard
Diameter: 8, 6, 4 mm
Operating pressure: 150 psi
The Clippard Push-Quick Fitting guarantees easy connection of pneumatic components to other piping systems and each other. Designed to be used with stiff tubing and flexible hosing made of urethane nylon, polypropylene and polyethylene, the push quick ...
Clippard
Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,550 bar
... MAXIMATOR fittings and gland assemblies of the 1,550 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 1,550 bar. All gland assemblies are fit for multiple use. Fittings are supplied complete with collars and ...
Maximator GmbH
Diameter: 0.25 in - 0.56 in
Operating pressure: 0 bar - 4,500 bar
... MAXIMATOR fittings and bolted unions from the 4,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 4,500 bar This series consists of multipurpose bolted unions and the attachments are equipped with ...
Maximator GmbH
Diameter: 0.31 in
Operating pressure: 0 bar - 10,500 bar
... MAXIMATOR fittings and bolted unions from the 10,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 10,500 bar This series consists of multipurpose bolted unions and the attachments are equipped ...
Maximator GmbH
Diameter: 0.25 in
Operating pressure: 0 bar - 550 bar
... The Z-swivel from Exitflex is the reference in the automotive and construction industries. Its unique design provides ease of use and prevents injuries for painters and workers in all sorts of industries. Multi-directional 3-axis movement ...
Diameter: 0.25 in
Operating pressure: 0 bar - 550 bar
... Five, high-precision metallic parts, made out of 303 Stainless Steel One friction washer, made out of PTFE One spring seal, made out of ultra-high molecular weight polyethylene Only 51 grams HIGHLIGHTS Rated at a maximum working pressure of 8,000 PSI ...
Diameter: 11 mm
... The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature wear of feed ...
MID - VARIACOR
Diameter: 11 mm
Operating pressure: 40 bar
... Swivel connection DynaVariacor makes it more comfortable to use low pressure washing gun type "Dinga". Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult ...
MID - VARIACOR
Diameter: 4 mm - 12 mm
Operating pressure: 250 bar
... Industrial, professional, is you it ever managed to have problems to link your hydraulic installations, to repair or to modify your machine tool? As soon as the slope of connectings that you looked for is not usual, you are obliged "to do odd jobs", ...
MID - VARIACOR
Diameter: 0.4 mm - 19 mm
COVAL proposes different models of male and female fittings adapted to the different suction cup ranges.
Diameter: 12, 10, 8, 6 mm
... Range of special vacuum-tight fittings, fitted with O-ring (blue). . 100% vacuum-tight and improved circuit sealing . Can be removed and reinstalled without requiring preparation of the tubing . Adjustable fittings for improved vacuum distribution . ...
Diameter: 0.125, 0.09, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, time tested ...
AIR Logic
Diameter: 0.125, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, time tested ...
AIR Logic
Diameter: 0.062, 0.09, 0.125 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, time tested ...
AIR Logic
Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar
The SP Cupla Type A is recommended for processes involving air, water, hydraulic oil, and chemicals. It yields a maximum working pressure of 15 to 75 bar. The housing materials of this coupling consist of steel, stainless steel, and brass. The seal material ...
Nitto Kohki Europe
Diameter: 14 mm
Operating pressure: 7 bar
These quick-connect couplings are very easy to connect. The plug fits into the socket with just a simple push of the hand. They are lightweight and compact in size. Their bodies are structured from chrome-plated brass which imparts a high degree of anti-corrosive ...
Nitto Kohki Europe
Diameter: 0.13 in - 1 in
Operating pressure: 15, 10 bar
The Hi Cupla model manufactured by Nitto, is a low-pressure quick coupling that is suitable for the connection of factory air supply with pneumatic tools. This tool offers important structural parts of steel models which feature a heat treated quality ...
Nitto Kohki Europe
... COUPLERS The external coupler [DAC-E] consists of two parts: a fixed part for connection to the plant and a movable part connected to the pump by means of an optional threaded connecting pipe. The two parts can be connected and disconnected without the ...
Zenit
... COUPLERS The bottom coupler with vertical discharge DAC-V is compact and rugged, suitable for installation in small pits. It allows the pump to be connected to the system and easily disconnected for servicing or storage even without draining the tank. The ...
Zenit
... COUPLERS DAC-V vertical discharge bottom couplers for use with pumps up to 1300 kg. Fixing by means of sliding flange or hook [KGP] (discharge DN350) with double guide pipe. A PATENTED guide pipe connection system that reduces mechanical stresses and ...
Zenit
Diameter: 3 mm - 16 mm
... STRAIGHT FITTINGS - BARB-STYLE CONNECTION ► For assembling with hose clips ► Straight version STRAIGHT FITTINGS - QUICK CONNECT STYLE Cost reduction through quick assembly and disassembly Straight ...
Diameter: 6, 8, 3, 4 mm
... ANGLED FITTINGS- BARB STYLE CONNECTION ► For assembling with hose clips ► Angled version ANGLED FITTINGS- QUICK CONNECT STYLE Cost reduction through quick assembly and disassembly Angled and swivel-mounted ...
Diameter: 6.35 mm - 25.4 mm
Operating pressure: 689.48 bar - 4,136.85 bar
... Overview
PANAM® HP Cone & Thread fittings cover six product families of high‑pressure fittings: connectors, unions, adapters & reducers, directional fittings (elbows, tees, crosses), hex nipples, caps & plugs, and glands & collars. All components ...
Panam Valve
Diameter: 3.175 mm - 50.8 mm
Operating pressure: 689.48 bar - 1,034.21 bar
... Overview
High-pressure pipe fittings in SS 316 including hex nipples, reducing hex nipples, couplings, adapters, elbows, tees, crosses, plugs and caps. Pressure rating 10,000–15,000 psi across NPT, ISO Parallel and 37° JIC connections. Sizes ...
Panam Valve
Diameter: 1.588 mm - 50.8 mm
Operating pressure: 0 bar - 689 bar
... PANAM Flare Fittings are available in SS 316, Duplex, Monel & Hastelloy materials Variety of end connections: Male & Female NPT, BSPP, BSPT, 37° Flare, Swivel & JIC Swivel Leak-tight connections capable of withstanding high pressure NACE certification ...
Panam Valve
the best suppliers