... rings provide additional extrusion resistance and prevent damage to O-Rings and seals.Backup rings are not seals themselves, but are used in conjunction with O-rings or other seals in high-pressure applications. ...
Dytron Advanced Materials Co., ltd
Temperature limit: -160 °C - 280 °C
Pressure limit: 0 bar - 0 bar
Diameter: 1 mm - 150 mm
Seats and inserts, which are important components in the valve industry, as a critical component, PTFE is very often to choose as the raw material. PTFE provides a low friction seat, with excellent media compatibility. Filled grades provide wear resistance ...
Dytron Advanced Materials Co., ltd
Temperature limit: -180 °C - 200 °C
... compressed. With this design, the compressor remains quite and maintenance is very easy. When using our PTFE scroll tip seal, the seal life are varies from 1000 to 3000 hours. Our customer was losing money due to replacement ...
Dytron Advanced Materials Co., ltd
... Seal (between flange and profile) Material PUR Weight (Kg) 0,075 ...
... Thermo gasket is a highly resilient textile gasket designed for high tempereture applications. The outer surface is composed of multitwined fiber glass yearn that found a rounded tube.To improve the resiliency of the ...
BONSING CORPORATION LIMITED
Temperature limit: 550 °C
... It is a highly resilent textile gasket designed for high temperature applications. The outer surface is composed of multiple intertwined fiber glass yarns that form a rounded tube. To improve the resiliency of the gasket, a special supporting ...
BONSING CORPORATION LIMITED
Temperature limit: 550 °C
Diameter: 5 mm - 16 mm
... reinforced-Golden brown-Self adhesive backing-Outer diameter 10mm Technical Overview: -Applications: It can be used as a gasket or seal on boiler, cook oven, industrial oven and wood stove doors. -Colors: Black ...
BONSING CORPORATION LIMITED
Temperature limit: -40 °C - 130 °C
... Can provide good compression characteristics, seal out dust/moisture, dampen rattle due to vibration, and compensate for surface contour irregularities. SPECMaterial : EPDM (soft quality)-black ; SPCC Temperature : It works properly ...
Tai Sam Hardware Corporation
... Can provide good compression characteristics, seal out dust/moisture, dampen rattle due to vibration, and compensate for surface contour irregularities. Spec Material : EPDM ...
Tai Sam Hardware Corporation
Temperature limit: -40 °C - 130 °C
... Can provide good compression characteristics, seal out dust/moisture, dampen rattle due to vibration, and compensate for surface contour irregularities. SPEC Material : EPDM (soft quality)-black ; SPCC Temperature : It works properly ...
Tai Sam Hardware Corporation
... THE RANGE 100MHz-10GHz - RIP-STOP FABRICS THAT ALLOW SELF-TERMINATING CUT ENDS ON GASKETS - AVAILABLE ON REELS, CUT-TO-LENGTH or PREFORMED READY TO INSTALL GASKET - PRESSURE SENSITIVE ADHESIVE (standard) - ...
Temas Engineering
... copper, aluminium. All metal gaskets offer excellent EMI shielding performance, providing electrical continuity when compressed between two mating surfaces. - NO TEMPERATURE LIMITS - CONTINUOUS OR CUT-TO-LENGTH GASKETS - ...
Temas Engineering
... Elastomer core gaskets are made of a resilient rubber core, knitted over by layers of wire mesh (most common is two layers). The knitted wire element provides EMI shielding effectiveness, while the elastomer core enables the gasket ...
Temas Engineering
Temperature limit: -20 °C - 80 °C
Pressure limit: 16 bar
Diameter: 80, 110, 168 mm
... The 90017 Series manufactured by Poliuretano is incorporated with a tenuta al fuco system wherein the system does not propagate or stroke any fires. This device is equipped with a flanged tube made according to the DIN UNI EN 1092 standards. Moreover, ...
... An opening in the panel can be achieved by cutting the mesh wires during assembly. A special rubber gasket to fit the orifice is available on request, to provide protection for personnel. ...
... Prevent evaporation with self-closing plate seal The RAPID Slit Seal is proven to prevent solvent evaporation and cross-contamination. It allows easy insertion and withdrawal of pipette tips and sampling needles without ...
BioChromato
Pressure limit: 30 psi
Diameter: 50 mm - 1,000 mm
... creating a water tight seal. In summary, under normal operating conditions, no part of the seal is in contact with the shaft - allowing for unlimited shaft rotation speed without any seal wear. During ...
Mide Technology Corp
... Made of BUNA-N 70 durometer rubber compound. Creates a tight seal for fluid or gas connections. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. ...
... silicone gaskets are made of high strength non-toxic non-toxic silicone. Seals are provided deflated. When it inflates, the air pressure causes the seal to expand and contact the surface to be sealed. ...
MEREFSA, S.L.U.
... Runoff-resistant, i.e. it can also be applied onto vertical surfaces, or used in overhead work. Disassembly requires medium strength. Seals immediately against low pressures. Remains slightly flexible up to a temperature of +120°C. ...
Shore A hardness: 40 unit
... FERMAPOR K31 is the trade name for Sonderhoff’s two-component polyurethane systems for the manufacture of flexible foam seals which are foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology. The systems ...
HENKEL SONDERHOFF
Diameter: 6 mm - 95 mm
Outer diameter: 14 mm - 120 mm
... oil seals and grease seals. Rod seals are radial seals. The seal is press-fit into a housing bore with the sealing lip contacting the shaft. Piston seals ...
Pressure limit: 10 bar
Diameter: 16 mm - 500 mm
Outer diameter: 27 mm - 574 mm
... IBG® Flat Gaskets for Flange Adaptors Seal materials - EPDM ...
Praher Plastics Austria GmbH
Temperature limit: -269 °C - 200 °C
Pressure limit: 40 bar
... reduced Dyneon™ TFM™ 1600 with kammprofile surface Gasket characteristics EN 13555 Gasket Characteristics (IDT) - Gasket characteristics DIN 2505 V K0×Kd [N/mm] - 5 × bd k1 [mm] - 1,1 × bd Gasket ...
IDT Industrie- und Dichtungstechnik
... Future-oriented fiber gaskets The novapress® product family represents the latest technology in fiber-based gasket sheets. The use of the latest process technology and a process control system for the entire manufacturing ...
Frenzelit
Temperature limit: -15 °C - 85 °C
Diameter: 0.5 in - 2 in
... Made from Polyurethane 90 Designed for application in high pressure conditions For static applications, prevents leakage Excellent abrasion resistance and tear strength Temperature resistance: -15°C + 85°C Hardness shore 90 ...
Temperature limit: 260 °C
Diameter: 10 mm - 300 mm
... grade and fillers to match required applications. 3P has recently developed new solutions with conductive PTFE to protect seals and bearing from electrostatic discharges in high speed electric motors. Strong partnerships with worldwide ...
3P Produits Plastiques Performants
... Tech-Etch RoHS compliant metalized nylon fabric over polyurethane foam core gaskets are setting a new standard for EMI shielding control. Nickel-plating over a highly conductive copper plated substrate provides excellent electrical characteristics ...
Tech-Etch
... The Advancap™ rod and piston seals are designed to provide a cost-effective cap seal solution that prevents extrusion and eliminates O-ring spiral failure in dynamic applications. Each seal combines ...
GREENE TWEED
Temperature limit: -20 °C - 200 °C
Pressure limit: 0.7 bar - 700 bar
Diameter: 6 mm - 400 mm
... Speed of rotation according to: pressure, size and nature of the fluid conveyed. Uses: Rotary distributor, high pressure pump, hydraulic motor, all rotational sealing, oil, gas, hydraulic and pneumatic, etc… ...
Duff-Norton Europe
Temperature limit: 85, 120 °C
Pressure limit: 0 psi - 5 psi
Diameter: 50 mm - 762 mm
... Patented Split Rotary Seal for Worn Shaft Applications The Chesterton® patented Matrix Rotary Seal is a split bearing seal developed to work on worn equipment and large run-out ...
A.W. Chesterton Company
Temperature limit: -34 °C - 100 °C
Diameter: 22, 27, 33 mm
Outer diameter: 28.9, 33.5, 39.9 mm
... non-threaded holes. - Liquid tight, dust tight and oil tight at enclosure. - Suitable for wet locations requiring a separate gasket between the fitting and enclosure. - Resistant to petroleum oil, mineral oil and grease, diesel fuel, ...
the best suppliers