Rated load: 3,000 lb - 16,000 lb
... come with mild or stainless steel rugged, bolt-in-place stands. The kits include three or four stand assemblies, load cells, stainless steel junction box, and cables. ...
Cardinal Scale
Rated load: 20 kg - 200 kg
... point series is a high performance and low cost load cell for use in bench scales, medical scales, and a variety of other applications. These low-profile load cells are ...
Cardinal Scale
Rated load: 450, 1,100, 1,800 kg
... while remaining flexible over the life of the cell. This special compound protects the load cell strain gages, and over a broad temperature range has no effect on load ...
Cardinal Scale
Rated load: 10,000 lb - 200,000 lb
... scale). 1311 load cells are made from mild steel, while 1391 load cells are made from 17-4PH stainless steel. These ...
BCM SENSOR TECHNOLOGIES bv
Rated load: 5 kg - 500 kg
... safety barriers. The load cell is supplied as standard with a 6-wire configuration (with sense wires). An optional 4-wire version is available on request (OIML C3 only). Make an enquiry about this ...
Thames Side Sensors
Rated load: 300 kg - 10,000 kg
The T85 stainless steel shear beam is a high accuracy load cell that is widely used in industrial weighing applications worldwide. It has OIML approval (which is ideal in legal-for-trade ...
Thames Side Sensors
Rated load: 300 kg - 2,000 kg
The T85-T stainless steel shear beam is a high accuracy load cell for industrial weighing applications, but primarily for platform scales due to its low height and blind loading hole, ...
Thames Side Sensors
Rated force: 200 kN - 50,000 kN
... -CAPACITY STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION Reference : 5105-ISO Standard reference force transducers specially designed according to ...
SENSY S.A.
Rated force: 5 N - 100,000 N
Universal load cells combining accuracy, sturdiness and easy installation o Material: - 2710: stainless steel - 2715: alloy steel o Protection class: IP67 o ...
SENSY S.A.
Rated force: 3 kN - 3,000 kN
LOW-PROFILE (PANCAKE) LOAD CELLS Reference : 2960-2962-2965 Universal tension and compression load cells for industrial force measurement. - Flat design - High stiffness ...
SENSY S.A.
Rated load: 0.01 t - 7.5 t
... Bending Cells, widely used in industrial environments, are also monodirectional. Traction devices, on the contrary, are those subject to traction only: dynamometers or load cells for ...
Riels Instruments
Rated load: 0.25 t - 100 t
... through the use of strain gauges. Wide assortment and numerous fields of application. We can split cells in: cell compression, traction cells, cell-way, ...
Riels Instruments
Rated load: 0.1 t - 200 t
... through the use of strain gauges. Wide assortment and numerous fields of application. We can split cellsin: cell compression, traction cells, cell-way, off-center. Very ...
Riels Instruments
Rated force: 5,000 kgf - 10,000 kgf
Height: 51, 38 mm
Industrial Weighing Intrinsic safety FM certified All stainless steel, suitable for harsh industrial applications Interchangeability 0.25% for multiple load cell applications 5-point ...
Rated force: 100 N - 200,000 N
Length: 1.5 m
FJ Series miniature low-profile load cells are compression load cells with excellent long-term stability. Their stainless steel design ensures their ...
Rated force: 15 daN - 3,000 daN
Length: 3 m
... measurements, test benches, laboratory tests Usable with load rings or buttons for better performance. “S” load cells provide superior performance in compact packaging. The special ...
Rated load: 500 kg - 2,500 kg
Stainless steel constuction Sealing: hermetically welded (IP68) OIMLCert. No.R60-2017-A-NL1-22.04. NTEP Cert. 17-113 Low profile construction
HOLI
Rated load: 500 kg - 2,500 kg
Length: 130 mm
Height: 31.8 mm
Robust and Durable Alloy Steel Material: Manufactured using high-quality alloy steel material, AS130 sensor ensures remarkable durability and resistance to wear and tear. This enables the sensor to perform ...
HOLI
Rated load: 500 kg - 2,500 kg
Nickel plated alloy steel constuction Sealing: hermetically welded, IP67 OIML Cert.No.R60-2017-A-NL1-22.04 NTEP Cert. 17-113 Low profile construction
HOLI
Rated load: 300 kg - 7,500 kg
G5i Reliable and accurate weighing Capacities 300-7500 kg IP68 Protection Able to legal metrology
GIROPES
Rated load: 18 t - 50 t
G8R High capacity for weighbridges Capacities 18-50 t IP68 protection Able to legal metrology
GIROPES
Rated load: 2, 3, 5 kg
G6M High precision for small loads Single-cell platforms to 500 x 500 mm Single point load cell with high precision for off-centre loads, ...
GIROPES
Rated load: 1,000, 500 kg
The transducers of the BC305 series are miniaturized low-profile load cells, with a high-resistance stainless steel measuring body, for compression/traction loads, with ...
S2Tech srl
Rated load: 50 kg - 10,000 kg
... profile platform scales - Space limitation installations - General industrial weighing FEATURES - Ultra low profile - Wide capacity range 50kg - Electroless nickel plated - Fully encapsulated ~10t - Matched ...
PT Limited
Rated load: 250 kg - 10,000 kg
... accuracy shearbeam load cell, available in capacities from 250kg to 10t in tool steel electroless nickel plated. A very popular Australasian shearbeam where it has become the industry ...
PT Limited
Rated load: 250 kg - 5,000 kg
... and classIII:9500 NTEP device, and similar approvals in other areas. It is insensitive to axial loads, yet super accurate. Constructed in alloy tool steel and electroless nickel plated for lifelong ...
PT Limited
Rated load: 100 kg - 20,000 kg
... Hoppers weighing •Tanks weighing •Silos weighing •Stainless steel AISI 630 (17-4-PH) •Hermetically welded seal (IP67) •Low profile •Spherical loading button for optimum alignment of load •Top ...
ADOS
Rated load: 30,000 kg - 625,000 kg
•Tanks weighing •Steel manufacture plants •High capacity silos weighing •Stainless steel AISI 630 (17-4-PH) •Hermetically welded seal (IP67) •Wide range of capacities •Individual test report •EX ...
ADOS
Rated load: 100 kg - 12,000 kg
... Tanks weighing •Silos weighing •Stainless steel AISI 630 (17-4-PH) •Hermetically welded seal •Low profile for applications with limited space •Spherical loading button for optimum alignment of load •Double ...
ADOS
Rated load: 5 kg - 50 kg
The AF Series, manufactured by Laumas Elettronica, is a single point load cell that has been constructed out of a special steel structure. It also has a combined error of less than +/- ...
LAUMAS Elettronica
Rated load: 0.5 kg - 15 kg
... Off center load cell type SUP15-02 can be used in small capacity weighing systems. Some applications are: Small weighing platforms. Electronic scales. Kitchen scales. Portable ...
Celmi
Rated load: 7 kg - 40 kg
Divisions Up to 6000 divisions OIML-R60 Material Fully stainless steel IP Rating IP-67 Accuracy Class C3-C4-C5-C6 Rated Output (RO) 2mV/V Output ratio error (RO%) ± 10% Vmin Emax/18000 Excitation ...
SENSOCAR
Rated load: 25 kg - 250 kg
... point platform Multihead weigher Dynamic weighers Divisions Up to 6000 divisions OIML-R60 Material Fully stainless steel IP Rating IP-67 / IP-68 Accuracy Class C3-C4-C5-C6 Rated Output (RO) 2mV/V Output ...
SENSOCAR
Rated load: 50 kg - 500 kg
... Single point platform Multihead weigher Dynamic weighers Divisions Up to 4000 divisions OIML-R60 Material Fully stainless steel IP Rating IP-67 / IP-68 Accuracy Class C3-C4 Rated Output (RO) 2mV/V Output ratio ...
SENSOCAR
Rated load: 5 kg - 100 kg
PE-2A Off-center load cell with rated load: 5-100 Kg
Logic S.r.l.
Rated load: 10, 20, 50, 100, 200 kg
NGX Flexion load cell with rated load: 10-20-50-100-200 Kg
Logic S.r.l.
Rated load: 100,000 lb
QSC Double bridge load cell with rated load: 100 kLbs
Logic S.r.l.
Rated load: 300 kg - 10,000 kg
... compression load cell equipped with a shear beam load cell, nickel-plated steel alloy and stainless steel versions. It has an ATEX version, ...
UTILCELL
The SDM70 Model is a load cell developed by Eilersen Electric Digital Systems. It is built with stainless steel construction with IP 68 protection rating for heady duty operation. This ...
Eilersen Electric Digital Systems A/S
The ATB-P X Series, assembled by ASA-RT, is an INOX stainless steel compression load cell intended for measurement applications. In addition, this tool is provided in various mechanical ...
Rated load: 0 kg - 20,000 kg
AEP transducers
Rated load: 500 kg - 100,000 kg
Strain-gage load cells are made by a metallic core over which one or more strain-gages are stick; the strain-gages detect the strain of the metal produced by the load ...
... bending, tensile and compression stress. A typical use is to monitor the load cell or moment monitoring by detecting the stress sustained by structure. Made of stainless steel, ...
Rated force: 22 N - 2,200,000 N
Rated load: 5 lb - 500,000 lb
A load cell or force sensor is a device which converts load or force into an electrical signal. A load cell should ...
Rated force: 33 N - 25,000 N
... with nominal force from 33 to 25000 N (7.5 to 5620 lbf.) •Overload protection up to 20-times nominal force, full stainless steel The force measuring bearings of the LMGZ-Series, designed for the measurement of tension ...
FMS Force Measuring Systems AG
Rated force: 50 N - 2,000 N
... construction •Measuring range 30:1, accuracy class ±0.5% •Overload protection rating of 10-times nominal force, stainless steel sensor body The C-Series force measuring sensor offers compact dimensions and flexible ...
FMS Force Measuring Systems AG
Rated force: 125, 250, 500, 50 N
... Measuring range 30:1, accuracy class 0.5% •Nominal forces from 50 to 500 N (11 to 112 lbf.) •Measuring body from stainless steel The force measuring bearings of the F-Series feature an extremely slim design. They ...
FMS Force Measuring Systems AG
Rated load: 5, 15, 20, 30 kg
FEATURES Construction en special steel, only 61 mm of height. Single-point scales with plate up to 360mm x 360mm. High quality protection barrier using special silicones. Protection IP 65. According ...
Ascell Sensor,S.L.
Rated load: 10, 30, 50, 100 kg
FEATURES Construction en stainless steel, only 25 mm of height. Mono-cell scales whose platform is up to 400mm x 400mm. High quality protection barrier using special ...
Ascell Sensor,S.L.
Rated load: 100, 200, 30, 50 kg
FEATURES Construction en stainless steel, only 41 mm of height. Mono-cell scales whose platform is up to 500mm x 500mm. High quality protection barrier using special ...
Ascell Sensor,S.L.
Rated force: 45 N - 11,125 N
The model C* transducer is the industry standard in strain-gauge based web tension transducers (sometimes called 'load cells'). Available in three frame sizes and both live-shaft and dead-shaft versions. ...
Dover Flexo Electronics
Rated force: 53 N - 1,800 N
... sensors for measuring tension in a moving narrow web of paper, film, foil or other material. Constructed of stainless steel and aluminum for excellent corrosion resistance, the NW transducer can be ...
Dover Flexo Electronics
Rated force: 55 N - 1,800 N
... size the unit to the machine frame prior to installation is significantly lower than when installing standard shaft-end load cells or tension transducers onto an idler roll. Another advantage of the ...
Dover Flexo Electronics
Rated force: 0 kN - 600 kN
Measure the compression and traction forces. Measuring ranges up to 600 kN; IP 67 hermetic protection; 2mV / V sensitivity; TIDS module included. Thermal compensation -10 to +40 ° C (temperature effect 10ºK = 0.04% FS); Input resistance: ...
Rated load: 0 t - 30 t
Length: 160, 218 mm
Height: 80, 100 mm
... possible to introduce an element in contact with the product or the surface of the product is not regular The compression load cell LCT-2001 is specifically designed as a reliable, simple and "low cost" ...
Please specify:
Help us improve:
remaining