DN: 10 mm - 65 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C
... Body material: stainless steel Pressure:0-16bar Orifice:10-65mm Pipe size:screw-type welded-type Fluid Media: Air etc Application industry Beer beverage, disinfection equipment, rubber machinery, textile printing and dyeing, pharmaceutical, ...
... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The main features ...
DN: 1 in - 2.5 in
... TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism. ...
DN: 40 mm - 400 mm
Pressure: 16 bar
Temperature: -10 °C - 80 °C
... enamel coating are available by request. -Bolts, Nuts and Washers: Zinc plated Steel. -Diaphragm: Natural Rubber reinforced with Nylon Fabric. Cross section of RAF valve RAF valves ...
DN: 0.5 in - 4 in
Pressure: 16 bar
... attached to it closes or opens the passage hole in the housing. WARNING: The use of shut-off valves as control valves is prohibited. ...
DN: 65 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C
... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation means the PROFLOW butterfly ...
DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C
... 9/EG Group II Category 2 GD ABS Certificate: ABS Steel Vessel Rules 1-1-7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves Co., Ltd. ...
DN: 25.4 mm - 101.6 mm
Pressure: 0 bar - 0 bar
Temperature: 20 °C
... butterfly valve Size:1"-4" Clamp-type pneumatic butterfly valve criteria: DIN, SMS, ISO, 3A, IDF, RJT Clamp-type pneumatic butterfly valve material: AISI304 or AISI316L with material contact parts Clamp-type ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 50 mm - 1,800 mm
Temperature: -196 °C - 593 °C
... Triple Eccentric Butterfly Product type Switch valve Product description Triple Eccentric Butterfly Valve Model D343H/X Size NPS 2”～72”(DN50～DN1800) Operating temperature -196℃～593℃ Operating ...
Temperature: 196 °C - 650 °C
... and molybdenum content of the Duplex Stainless Steels as compared to the austenitic grades with similar corrosion resistance, gives the Duplex grades a lower cost. AFC Duplex steel valves ...
... Applicable Standards: • STEEL GLOBE VALVES, BS EN 13709/API 600 • STEEL VALVES,ASME 816.34 • FACE TO FACE, ASME B16.10 • END FLANGES ASME 816.5 • BUTTWELDING ENDS,ASME 816.25 ...
WENZHOU AEA VALVE CO., LTD.
DN: 3 in
... The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel trim for a ...
... Manifold valves stack multiple hydraulic valves on different levels of a single valve assembly according to the hydraulic principle diagram to achieve a variety of functions through an internal oil passage. ...
DN: 50 mm - 300 mm
Pressure: 6, 7, 8, 10 bar
... water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body Stainless steel 1.4408 ...
DN: 4 mm - 25 mm
Pressure: 250 bar - 300 bar
Temperature: -20 °C - 100 °C
... Mounting holes Position switches Combinations Detent on request ...
MHA ZENTGRAF GmbH & Co. KG
Pressure: -8 mbar - -10 mbar
Temperature: 150 °C - 200 °C
Flow rate: min -9.0 l/s
... Specification: Use lockable cylinder, gate plate could precisely stop at alternative position. Alternative position is set by reed sensor. Good reproducibility of gate plate position, tolerance ±1%. Procedure control is programmable and flexible. ...
DN: 265, 315 mm
... Mild steel butterfly valve for handling powders, commonly used as discharge valve under silos is recommended for heavy duty applications. The valve can be supplied with manual lever only. ...
DN: 150 mm - 400 mm
Pressure: 50, 25 bar
... INTER-TECH valve is equipped with métal to métal sealing, for severe applications where a plastomer seat is not viable. TECHNOLOGY Plate standardisée) in accordance with EN-ISO 5211 Adjustable stuffing box Graphite packing Treaded ...
DN: 40 mm - 800 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 200 °C
... Soft seated elastomeric Butterfly Valves SBE are available in either wafer or lug design for on/off, throttling or control applications for dilute acids and lyes, powdery media or gaseous service. Main features • Large selection of ...
Pressure: 4 bar
... Front control valve in stainless steel, inlet and outlet G1/4" female, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum pressure: 4 bar Maximum temperature: ...
DN: 15, 20 mm
Pressure: 10 bar
Temperature: 0 °C - 65 °C
... including category 3 according DIN 1988-100 wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water with stainless steel mesh at inlet maintenance-free ...
DN: 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 100 l/min
... This device is an end stroke valve for tipper truck- steel 3/4". ...
... Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Bolted flange as body-cover for ball Flanges drilled acc.to UNI or DIN Possibility of equipment with handlever, ...
DN: 50 mm - 400 mm
Pressure: 16 bar
Temperature: 800 °C
... One-piece body, centric disc Operating temperatures up to 800°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length according to manufacturer’s standard Mounting flange ...
Herberholz GmbH
... One Piece Shaft (14" and above) Position Indicator ISO 5211 Top Flange The NUTORK double offset butterfly valve is a high performance valve that offers superior service life and is trouble-free to maintain. The second ...
the best suppliers