DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C
... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials series 20, 21, 30, 31, DVGW series 40,41, Ball- valve with air vent Thread Cyl. ...
DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C
... Product description
Needle
valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these
valves are used in demanding hydraulic systems such ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 1,379 bar
Temperature: -73 °C - 232 °C
... manually closed or opened in either direction, WEH® needle valves reliably provide this function. The valves run smoothly and are highly durable because the valve needle is decoupled from the rotating ...
DN: 0.125 in - 1 in
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 180 °C
... The VRX quick exhaust valves from Airwork, when mounted on a pneumatic cylinder, allow for rapid pressure release from within the cylinder. Thanks to the material they are made from, 316L stainless steel, ...
Pressure: 400 bar
... Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve ...
DN: 4 mm
Temperature: -18 °C - 93 °C
... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate vacuum when ...
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel ...
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... diaphragm ● Body designs: 2-way valve body, T-pattern, Y-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel ...
DN: 0.25 in
Temperature: 0 °C - 120 °C
... . 4kg/cm2; Liquid-Min. 0.2kg/cm2; Max. 4kg/cm2; Special range on request Accuracy: ±5% F.S Material: Body and metal parts-316 stainless steel; Membrane-Teflon, and SS316L on request ...
DN: 0.25 in - 3 in
Pressure: 0 bar - 69 bar
Temperature: -18 °C - 260 °C
... Technical Data • - ISO 5211 Direct Mounting Pad • - Full Port • - Investment Casting • - Design: ASME B16.34 • - Valves Inspected & Tested according to API 598 Standard Material: EN10213-1.4408 , EN10213-1.4308 , EN10213-1.4409 , EN10213-1.0619 ...
DN: 1.5, 2, 2.5, 3, 4 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C
... Refer below technical data sheet (Available BSPT / NPT) Main Features: Internai Parts are in superior corrosion résistance Steel, Suitable for irrigation. coil features: High Reliability Unaffected by Voltage Surges. Easy coil changes ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - Gases - Municipal ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal and industrial ...
DN: 25 mm - 150 mm
Pressure: 6 bar
... air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air operated pinch valve ...
DN: 25 mm - 450 mm
Pressure: 3, 4, 2 bar
... operated pinch valves of the RVA series can be made with a flange connection complying with ANSI B 16.5- 150lbs, if required. Structure of RVA series The RVA series air operated pinch valves consist of the essential ...
DN: 10 mm - 150 mm
Pressure: 6 bar
... operated pinch valve is a valve from AKO's VMC series. Manufactured according to DIN 11850 series 2, it has a body made up of an electro-polished stainless steel or a powder-coated aluminium and a weld-on ...
Pressure: 0.2 bar - 8 bar
Temperature: 1 °C - 75 °C
Flow rate: 12, 17, 35 l/min
... resistance: 27 Ω ± 0.5
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 345 bar
Temperature: -54 °C - 232 °C
... Technical data
- Type: Needle valve
- Inlet pressure P1: max. 345 bar
- Material: see ordering info
- Body: see ordering info
- Seat: PCTFE
- Filter: 316 stainless steel
- Inlets
Jewellok
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 206.8 bar
... Pneumatic Diaphragm Valve HD Series — 316L Stainless Steel, High-Purity, High-Pressure for Laboratory Specialty Gases
Product Application and Purpose
The HD Series pneumatic diaphragm ...
Jewellok
DN: 0 mm - 10,000 mm
...
Technical Specifications
- Series: LD SERIES (low-pressure manual diaphragm valve).
- Body material: 316L VIM-VAR stainless steel.
- Inner surface roughness: can reach
Jewellok
DN: 0 mm - 10,000 mm
Pressure: -1 bar - 20 bar
Flow rate: 18 l/min - 5,000 l/min
... (water) 0–28 L/min @5 bar; Body: Aluminum or Stainless Steel; IP52
DN: 12.7 mm - 25.4 mm
Pressure: 0 bar - 689.5 bar
Temperature: -50 °C - 200 °C
... Standard hex head bleed
valve; internal hex (hex socket) bleed
valve.
Application Scope
Draining, venting and pressure relief for ball
valves, gate
valves, wellhead trees, ...
DN: 63 mm - 100 mm
... Inline manual ball
valve for ISO-K flanges, designed to ensure handling and sealing in vacuum applications. The product is available in multiple sizes (DN) with AISI 304 flanges and variants with Teflon® (PTFE) seals.
Available ...
Streas srl
DN: 63, 100 mm
Temperature: -200 °C - 860 °C
... Manual 90° ISO-K
valve with bellows shutter, designed for manual flow control in systems with ISO-K flanges. The 90° angle allows replacement with elbow or tee fittings; body in AISI 304 and seals in fluoroelastomer (FKM).
Available ...
Streas srl
DN: 16 mm - 50 mm
... Manually operated
valve with bellows shutter; the 90° angle allows replacement with an elbow or tee fitting.
Product details:
- Line: KF
- Line type: KF
- Type: Valves
- Finish:
Streas srl
DN: 50 mm - 600 mm
Pressure: 4 bar - 10 bar
Temperature: -20 °C - 120 °C
... • Pneumatic Actuator -OF -NC -NA • Electric Actuator -220V -24V • Special voltages • Includes end of career ...
DN: 10 mm - 20 mm
Temperature: 180 °C
... materials on request Other ball valves Other ball valves are available in our catalogue. Contact us to find out all the valves we can offer you. ...
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 90 °C
... removal Integrated stainless steel mounting inserts Individual valve configuration options Pneumatic or electric GF actuators (optional) Other materials on request Other ball valves Other ...
DN: 6 mm - 25 mm
Temperature: -40 °C - 85 °C
... Overview
Hydrogen ball
valve designed for high mechanical strength and to minimise hydrogen embrittlement. Suitable for 100% H2 service with materials verified for hydrogen applications and options certified for shut-off service ...
DN: 0.5 in - 8 in
Temperature: -60 °C - 538 °C
... Habonim metal seated valves the right choice for the industry’s toughest applications. Materials: Stainless Steel, alloys, Carbon Steel – selected to meet temperature ...
DN: 15 mm - 50 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 270 °C
... PFA-lined flanged ball valve PN 10 -PN 40, class 150 with full bore. The material combination stainless steel 1.4408 (From DN 65 body made of steel epoxy coated, stainless steel upon ...
GEFA Processtechnik
DN: 2.5 mm
Pressure: 3 bar - 10 bar
Temperature: 0 °C - 140 °C
... AVS Römer pressure relief valves are used for protection in closed circuits. When the set response pressure is exceeded, the valve opens and discharges the fluid. ...
DN: 10 mm - 100 mm
Pressure: 16 bar - 64 bar
... restrictions guaranteed High-precision Maximum versatility The VVS is a manual sanitary ball valve made by positioning a precision ball with hole inside the valve body whose opening movement allows a product passage ...
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve is done by the ...
DI NICOLA INFINAM
DN: 15 mm - 400 mm
Pressure: 16 bar - 100 bar
... Materials: carbon steel, alloy steel, stainless steel, duplex steel,bronze, Inconel,Hastelloy,Monel, Incoloy etc. Carbon Steel A105N,F11,F22,F5,F9 ...
wenzhou domos fluid equipment co.,ltd
DN: 10 mm - 50 mm
Pressure: 136 bar
Temperature: -29 °C - 425 °C
... pack. The material used for this product can either be forged Carbon steel or stainless steel. It has a Vz stellite of Trim 8 for carbon steel valves, a Trim 10 standard ...
SFERACO
DN: 2 in - 40 in
... - Using a ball as the structure to close the cross-section of the pipe and prevent the flow of the fluid. - Forged steel bolted or all welded body, close coupled trunnion block design for low operating torques, secondary seat sealant ...
Athena Engineering S.r.l.
the best suppliers