DN: 40 mm - 400 mm
Pressure: 20, 25 bar
... Pump Pressure Control Valve, designed for advanced fire protection systems meeting the NFPA-20 guidelines. The 42T-20 is used for controlling the flow and pressure at the pump discharge, performing also as a non return check valve. ...
DN: 32 mm - 150 mm
Pressure: 27.6, 28 bar
Temperature: -50 °C - 105 °C
... gas-powered suction stop valve provides the normal operating features of the R/S CK-2 suction stop valve and features a built-in failsafe to close the valve until pressure is equalized in the event of ...
DN: 10, 15, 20 mm
Pressure: 5 bar
Temperature: 140 °C
... The SWmini4 valve hygienic design makes it ideal for use in the dairy, beverage and brewing industries as well as in the chemical industry. The valves are designed for universal applications and stand out for their increased ...
APV
DN: 20 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C
... aging-resistant material, lining at the valve body inner cavity, valve element, valve stem and other parts in contact with the medium Corrosion-resistant valve body Valve ...
DN: 63.5 mm
Pressure: 207, 276 bar
Flow rate: 19, 38 l/min
... BUILT-IN PRESSURE RELIEF VALVE U.S. PATENT No. 7,063,100 The FRRV10-41F is a screw-in, cartridge type, combination valve includes a pressure compensated, non adjustable priority type flow regulator and a pressure relief ...
HYDRAFORCE
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
... Abweichende Temperaturmöglichkeiten auf Anfrage Contact travel 0°; 90° Surface burnished Material Steel housing, ball and operating shaft POM ball seal NBR O-ring ...
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve is done by the ...
DI NICOLA INFINAM
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
DI NICOLA INFINAM
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... Di Nicola manufactures rising and non rising stem cast steel valves in carbon steel ASTM 216 WCB/GP 240GH+N and stainless steel with high nickel alloys for conditions of extreme corrosion ...
DI NICOLA INFINAM
DN: 6 mm - 40 mm
Pressure: 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...
WITT-Gasetechnik
DN: 20 mm - 100 mm
Pressure: 1.5, 10, 40, 25 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...
WITT-Gasetechnik
DN: 0.5, 0.75, 1, 1.25, 1.5 in
Pressure: 25 bar
... For oxygen, for the manual interruption of gas supply lengths: 65, 120 mm weights: 1.030 / 1.800 g Approvals EN 9539 ...
WITT-Gasetechnik
DN: 100 mm - 1,000 mm
Pressure: 0.5 bar - 10 bar
Temperature: -40 °C - 800 °C
... knife gate valves are specifically designed for the precise control of solids, powders, and bulk materials. Their unobstructed flow design ensures smooth and continuous discharge, reducing material build-up and premature wear. The welded ...
Flowrates
DN: 32 mm - 1,400 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 180 °C
... knife gate valves experts, Flowrates will provide the finest solutions to your process. Our extensive range of knife gate valves enables our customers to solve problems on site trough our solutions. They are available ...
Flowrates
DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C
... Technical Advantages of Triple Eccentric Butterfly Valves Better trade-off of mass, face-to-face and nominal diameter than other types of metal/metal valves (ball valves, gate valves, ...
Flowrates
DN: 15 mm - 150 mm
Pressure: 0 bar - 40 bar
Temperature: -60 °C - 350 °C
... control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 150 mm
Pressure: 10, 40 bar
Temperature: -10 °C - 350 °C
... pneumatic sliding gate control valve type 8028 with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 150 mm
Pressure: 10, 40 bar
Temperature: -10 °C - 350 °C
... sliding gate control valve type 8028 in reinforced GS3 design with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve ...
Schubert & Salzer Control Systems GmbH
DN: 8 mm - 50 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 185 °C
... actuator parts (except the seals and design elements) are made from stainless steel. The "Normally closed", "Normally open" and "Double acting" control functions are available. The valve has an optical ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C
... Diaphragm valve - 650 The GEMÜ 650 BioStar 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 0.125 in - 1 in
Pressure: 2.5 bar - 7 bar
Temperature: 0 °C - 60 °C
... The GEMÜ Q40 2/2-way pinch valve has a stainless steel piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control and regulate media. ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 0.375, 0.472, 0.25, 0.5 in
... Plunger valves are composed of a cylindrical brass body, a steel plunger with a conical valve and a thrust spring. Connected to vacuum, they are normally closed. They activate suction, thus creating ...
DN: 0.375 in
... Mechanically operated valves These valves are composed of an anodised aluminium body, a steel pin solidly connected to a conical shutter and of a thrust spring. Connected to vacuum, they are normally ...
Pressure: 400 bar
... Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve ...
DN: 4 mm
Temperature: -18 °C - 93 °C
... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate vacuum when ...
DN: 0.75 in
Pressure: 5 bar
Temperature: -25 °C - 85 °C
... /li>
DN: 0.125 in
Pressure: 2 bar - 11.5 bar
Temperature: 0 °C - 70 °C
... orifice: 3.0mm) Temp. Range (Operating): 0 ~ 70 ⁰C (32 ~ 158 ⁰F) Port Size: G1/8" Manifold Material: Aluminum Wetted Materials: Aluminum, Stainless steel, Brass, FKM Electrical Connection: M12 Connector ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 65 °C
... Product Overview
The EBV series electric ball
valves are high-performance control
valves available in V-port and stainless
steel sanitary versions. They are designed for precise flow regulation ...
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel ...
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... diaphragm ● Body designs: 2-way valve body, T-pattern, Y-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel ...
DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C
... Product description
Needle
valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these
valves are used in demanding hydraulic systems such ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 1,379 bar
Temperature: -73 °C - 232 °C
... manually closed or opened in either direction, WEH® needle valves reliably provide this function. The valves run smoothly and are highly durable because the valve needle is decoupled from the rotating ...
DN: 40 mm - 300 mm
Pressure: 16, 10, 8 bar
... The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and longterm reliability. This valve is also equipped ...
DN: 0.125 in - 1 in
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 180 °C
... Airwork’s VRX quick exhaust valves allow the possibility (if mounted on a pneumatic cylinder) to discharge rapidly the pressure contained inside it. Thanks to the material used for their realization (stainless steel AISI ...
DN: 0.25 in
Temperature: 0 °C - 120 °C
... . 4kg/cm2; Liquid-Min. 0.2kg/cm2; Max. 4kg/cm2; Special range on request Accuracy: ±5% F.S Material: Body and metal parts-316 stainless steel; Membrane-Teflon, and SS316L on request ...
DN: 0.25 in - 3 in
Pressure: 0 bar - 69 bar
Temperature: -18 °C - 260 °C
... Technical Data • - ISO 5211 Direct Mounting Pad • - Full Port • - Investment Casting • - Design: ASME B16.34 • - Valves Inspected & Tested according to API 598 Standard Material: EN10213-1.4408 , EN10213-1.4308 , EN10213-1.4409 , EN10213-1.0619 ...
Pressure: 8.3 bar
... Fill and Bleed Valves may be used to pressurize or "fill" a chamber or bladder by depressing the toggle in one direction and then de-pressurize or "bleed" that same chamber or bladder by depressing the toggle in the other direction. Toggling ...
Pressure: 100 psi
Flow rate: 51 l/min
... 3-Way Toggle Subminiature Spool Valve, NP Steel Toggle Additional Information Air Flow 1.4 scfm@100 psig Max PSI 100 psig Ports 3 to 56 Temperature Range 32 to 230 F Travel Arc 50 degrees ...
DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min
... Constant openning valve, 3 way, made in steel for working with high pressure. ...
DN: 25 mm
Pressure: 40, 25, 16 bar
Temperature: -20 °C - 120 °C
... find ball valves on the market in brass, bronze, gray cast iron, carbon steel or 316 stainless steel. As for the connections, we find standard ISO 228 gas threaded connections, NPT threaded, ...
DN: 6.35 mm - 25.4 mm
Pressure: 1,034 bar - 1,378 bar
... Overview
Panam PDBB Double Block & Bleed
valves in stainless
steel 316 (SS 316) for high-pressure applications. Ball-Needle-Ball configuration is rated to 15,000 psi (1034 bar); Needle-Needle configuration is ...
Panam Valve
DN: 3.175 mm - 25.4 mm
Pressure: 689.5 bar - 4,136.9 bar
... Overview
Panam HP needle
valves in
SS 316 are available in five pressure series (HP, HP1, HP2, HP3, HP6) for high‑pressure fluid and gas systems. Thread options include NPT, MP Cone and HP Cone. Body configurations ...
Panam Valve
DN: 3.175 mm - 25.4 mm
Pressure: 0 bar - 1,379 bar
Temperature: 0 °C - 538 °C
... Materials: SS 316, Duplex, Monel & Hastalloys in forged & bar stock construction. Variety of end connections: Male & Female NPT, BSPP, BSPT, ISO tapered pipe ends & PANAM® tube fittings Non-Rotating vee tip / Ball tip provides repetitive ...
Panam Valve
DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C
... The PJF Series Angle Seat Valve is designed for optimal flow control in industrial applications. It features a robust construction that ensures durability and reliability in demanding environments. The valve is suitable ...
DN: 10 mm - 200 mm
Pressure: 16, 25, 40 bar
Temperature: -20 °C - 180 °C
... The pneumatic ball valve is designed for efficient flow control in various industrial applications. It features a robust construction that ensures durability and reliability. The valve is easy to operate and maintain, ...
the best suppliers