Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi
... captured O-ring seal design, for leak-tight sealing at both the threaded end of the fitting and at the tubing-to- fitting interface. Beswick Push-To-Connect style fittings permit easy tube connecting ...
Beswick Engineering Co, Inc.
Diameter: 0.25 mm
Operating pressure: 0 psi - 150 psi
... captured O-ring seal design, for leak-tight sealing at both the threaded end of the fitting and at the tubing-to- fitting interface. Beswick Push-To-Connect style fittings permit easy tube connecting ...
Beswick Engineering Co, Inc.
Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi
... feature Beswick’s unique captured O-ring seal design, for leak-tight sealing at the tubing-to- fitting interface. Beswick Push-To-Connect style fittings permit easy tube connecting and disconnecting, and are an excellent ...
Beswick Engineering Co, Inc.
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
... years. PISCO's uniquely shaped elastic sleeve shuts out air leaks. Industry leading wide variety of models. Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more ...
NIHON PISCO CO., Ltd.
Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
... Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy to press oval ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
... Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping in cleanroom, is ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 40 mm
... For variable positioning of the weld end ■ With infinitely variable weld-on end ■ Angles, L or Tee form ■ Metric, Whitworth or NPT thread ■ Temperature-resistant from -270 °C up to +500 °C (dependent on the material used) ...
Diameter: 50 mm - 500 mm
Operating pressure: 6 bar
... 90° Tee, short spigot for butt welding PN6 SDR 17,6 - S 8,3. Series of fittings designed for conveying fluids under pressure with a weld connection system (butt welding). ...
FIP - Formatura Iniezione Polimeri
Diameter: 0.375 in - 4 in
Operating pressure: 16 bar
... Series of fittings for pipes conveying fluids under pressure with threaded joints. ...
FIP - Formatura Iniezione Polimeri
Diameter: 50 mm - 225 mm
Operating pressure: 6 bar
... Series of fittings designed for conveying fluids under pressure with a weld connection system (butt welding). ...
FIP - Formatura Iniezione Polimeri
Operating pressure: 10 bar
... Coupling T piece Material - Brass blank Max. operating pressure - 10 bar Max. operating temperature heating - 120 °C ...
Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,050 bar
... Maximator Pipe Fittings are designed for liquid and gas applications. The P Series Fittings are available from 1/4” to 1”NPT to 15,200 psi (1,050 bar). NPT threads must be sealed using a high quality PTFE tape and/or ...
Diameter: 0.5 in - 2 in
... Material - : - Aluminium Application - : - External installation applications Standard - : - UL50 Certificate - : - UL Feature - : - Resistant to dust and rust, sealed and screwed ...
Diameter: 10 mm - 20 mm
... Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection. Material: brass Models : . RVM: Straight Fitting (Male) . RVF: Straight Fitting (Female) . ...
Diameter: 0.062, 0.09, 0.125 in
Operating pressure: 0 psi - 125 psi
... Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, ...
AIR Logic
Diameter: 0.13, 0.06, 0.09 in
Operating pressure: 0 psi - 125 psi
... Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, ...
AIR Logic
Diameter: 0.13, 0.17, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi
... Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. A captured O-ring provides a high quality seal against the mating part. Barbed connections are a clean, time tested and cost ...
AIR Logic
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR seals Black thrust ...
ITV
Diameter: 4 mm - 12 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR seals Black thrust ...
ITV
Diameter: 4 mm - 12 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR seals Black thrust ...
ITV
Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar
... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 mm Features Compact ...
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar
... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 mm Features Compact ...
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar
... > - Ambient temperature: - -10°C to +60°C > - Threaded connection: - Male : R - Taper thread, Female : G - Parallel thread > - Media temperature: - +5°C to 50° C > - Applicable tube material: - Nylon, Polyurethane > - Recommended tolerance - for tube ...
UFLOW AUTOMATION
Diameter: 6 mm
... rigid tubes -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: stainless steel Tube fittings out of stainless steel are indispensable and well- proven accessories in analytical technology in order ...
Diameter: 8 mm
... rigid tubes -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: stainless steel Tube fittings out of stainless steel are indispensable and well- proven accessories in analytical technology in order ...
Diameter: 12 mm
... rigid tubes -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: stainless steel Tube fittings out of stainless steel are indispensable and well- proven accessories in analytical technology in order ...
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
... The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
... The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings of the MT ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
... Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: Resin (PEI) 4 ...
C.Matic S.p.A.
Diameter: 6 mm - 100 mm
Operating pressure: 20, 16 bar
... THREADED TEE (CASTING) - STAINLESS STEEL 316 Model : 5248) ...
BENE INOX
Diameter: 6 mm - 50 mm
Operating pressure: 16, 20 bar
... REDUCED THREADED TEE - STAINLESS STEEL 316 (Model : 5250) ...
BENE INOX
Diameter: 8 mm - 50 mm
Operating pressure: 150 bar
... TEE SW - STAINLESS STEEL 304L - 316L (Model : 5349) ...
BENE INOX
... Material: Stainless Steel 316L (SS 316L)
... 764LR
... butt-weld fitting
Diameter: 6.35 mm - 25.4 mm
Operating pressure: 689.48 bar - 4,136.85 bar
... Overview
PANAM® HP Cone & Thread
fittings cover six product families of high‑pressure
fittings: connectors, unions, adapters & reducers, directional
fittings (elbows, tees, crosses), hex nipples, ...
Diameter: 3.175 mm - 50.8 mm
Operating pressure: 689.48 bar - 1,034.21 bar
... flexibility
Diameter: 4 mm - 12 mm
... Overview
SPAC AP-Series (grey) and EP-Series (black) push-in
fittings for pneumatic tubing. Compatible with polyurethane (PU) and nylon tubing. Product range includes connectors, elbows, tees and multi-connectors with BSP threaded ...
Diameter: 4 mm - 16 mm
Ningbo Phen Automation Co., Ltd
Diameter: 0.125, 0.25, 0.375, 0.5 in
Operating pressure: 0 bar - 12 bar
... Ambient Temperature 0~60 °C Max. Working Pressure - 1.2 Mpa Working Medium - Air. Vacuum Tube Material Nylon/PU Tube ...
Ningbo Phen Automation Co., Ltd
Diameter: 0.125, 0.25, 0.375, 0.5 in
Operating pressure: 0 bar - 18 bar
... Metail Fittings in Material Brass (Nickle Plated), SUS304, SUS316 Complete product range in various types such as Straight, Elbow, Tee, Speed Controller etc.. Complete Dimension Range ...
Ningbo Phen Automation Co., Ltd
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
... Instant Pneumatic Fittings - Ø 4 to 12 mm - M5 to 1/2" Conical (Teflon-coated) or cylindrical (O-ring) fitting Features: - Competitive pricing, robust, highly reliable, with over 30 years of proven experience - ...
Operating pressure: 80 bar
Operating pressure: 0 bar - 15 bar
... Body Material - Plastic/Zinc alloy Operating temperature - -10-60°C(14-140°F) Working pressure - 0-1.0Mpa(0-145psi) Minimum negative pressure - -100Kpa(-14.5psi) Maximum pressure - 1.5MPa (217.5psi) Available medium - Air Applicable ...
Diameter: 16 mm - 200 mm
... type: CF flange
Available items
- 3T16CF-4 — Material:
Streas srl
Diameter: 63 mm - 400 mm
... Three-way connection
fitting equipped with ISO-K flanges.
Available items:
- 3T63ISOK-4 — DN 63 — Availability: High — A: 176 mm (6.929 inch) — B: 88 mm (3.465 inch) — C: 95 mm (3.740 inch)
- 3T80ISOK-4
Streas srl
Diameter: 10 mm - 50 mm
...
Features / Technical specifications
- Line: KF
- Line type: KF
- Product type: Connection fittings (reducing tees)
- Finish: Micro shot-blasted
- Material available: AISI 304
- Function:
Streas srl
Operating pressure: 1,035 bar - 4,200 bar
... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...
Operating pressure: 0 MPa - 700 MPa
... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...
Diameter: 3 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
... MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 bar, medium pressure ...
Diameter: 0.25 in - 4 in
... Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - ...
the best suppliers