Temperature sensors

Temperature: -50 °C - 200 °C

... supply line is connected with the measuring winding with strain relief in a 2, 3 or 4 wire circuit. The temperature is measured along around 2/3 of the sensor length.

Temperature: -50 °C - 200 °C

• Fully shielded design (sensor and measuring line) • Where space is limited, the grounding and shielded measuring line are positioned opposite (special implementation) • Current load capacity of shielding ...

Temperature: -50 °C - 200 °C

• Rigid construction • High dielectric strength due to mica insulation • Installation heights from approx. 1 mm thickness • As single and double thermometer • Choice of platinum, copper or nickel measuring winding ...

Temperature: -70 °C - 500 °C

... probe, 100 x 3 mm without cable Features • Class A sensors with a 4-wire connection> • Connection: 4-pin Binder connector plug series 711 • 90: Response time to reach 90 % of actual temperature ...

Temperature: -70 °C - 500 °C

... probe with handle with 1 m cable Features • Class A sensors with a 4-wire connection> • Connection: 4-pin Binder connector plug series 711 • 90: Response time to reach 90 % of actual temperature ...

Temperature: -70 °C - 500 °C

... probe 200 x 6 mm, not waterproof Features • Class A sensors with a 4-wire connection> • Connection: 4-pin Binder connector plug series 711 • 90: Response time to reach 90 % of actual temperature ...

Temperature: -50 °C - 70 °C

... NTC 10 Model of Resistive Temperature Sensor (NTC), manufactured by Produal Oy, is specifically designed for automatic ventilating systems to detect duct temperature. Its sensor ...

Temperature: -30 °C - 80 °C

The TEM Model is a temperature sensor device. It is designed for automatic HVAC systems. The system is mainly used for measuring temperatures in traffic tramp and street constructions. ...

Temperature: -50 °C - 120 °C

... Series of Temperature Sensor, is specifically designed for domestic water temperature control utilization with quick response time. It can generate with temperature range ...

Temperature: 0 °C - 60 °C

... air temperature under all environmental conditions, with an integrated T-type thermocouple temperature sensor, outstanding durability and accuracy. The MT-052-T Temperature ...

Temperature: -40 °C - 60 °C

... wire PT-100-Class A RTD Temperature Sensor, the MT-052-A is designed for all-weather accurate temperature measurement. The MT-052-A Temperature Sensor ...

Temperature: -20 °C - 80 °C

The Class A PT-100 temperature sensor, with a measurement accuracy of better than 0.15°C, provides accurate temperature measurements for IV and PV performance ratings. x4 Wire Cable Temperature ...

Temperature: -250 °C - 500 °C

... 500 Model of Platinum Resistance Temperature Probe, manufactured by Leyro Instruments, is configured with pure platinum design without mechanical stress and protected by a capsule ceramic. It can generate with a temperature ...

Temperature: -250 °C - 670 °C

THe LSS 670 is a platinum resistance temperature probe that is constructed without mechanical stress and is insulated by a capsule ceramic. Specially made to endure high thermal shocks, ...

Temperature: -200 °C - 300 °C

Leyro instruments with working temperature PRT LTS 300, measurement range -200 to 300 °C are ideal for different applications. These are platinum resistance thermo TRP with high quality and excellent stability for work. ...

Temperature: -200 °C - 1,600 °C

TH Temperature Sensors It is used by many factory because of its simple and convenient temperature measurement.

Temperature: -70 °C - 250 °C
Probe diameter: 10, 6, 8 mm

Temperature probe PT100 (RTD) with head with electric connection and stem in stainless steel AISI 316. It is normally installed in pipes or tanks. Applications: Chemical industry, Pharmaceutical ...

Temperature: -70 °C - 250 °C
Probe diameter: 6, 8, 10 mm

Temperature probe PT100 (RTD) with head with electric connection and stem in stainless steel AISI 316. It is normally installed in pipes or tanks. Applications: Chemical industry, Pharmaceutical ...

Temperature: -70 °C - 250 °C
Probe diameter: 6, 8, 10 mm

Temperature probe PT100 (RTD) with head with electric connection and stem in stainless steel AISI 316. It is normally installed in pipes or tanks. Applications: Chemical industry, Pharmaceutical ...

Temperature: -60 °C - 200 °C

... soldering, welding and crimping. The nickel temperature sensors are vibration and temperature shock resistant with simple interchangeability and small dimensions. Furthermore, the ...

Temperature: 5 °C - 45 °C

The TSic 506F/503F/501F Series of temperature sensor ICs is specifically designed as a low-power solution for temperature measurement in building automation, industrial and mobile applications. ...

Temperature: 10 °C - 90 °C

... Series of temperature sensor ICs is specifically designed as a low-power solution for temperature measurement in building automation, industrial and mobile applications. With a standard ...

Temperature: -40 °C - 1,700 °C

A temperature sensor is a device that detects and measures heat and cold by converting the data into an electrical signal. RTDs (Resistance Temperature Detectors) are temperature ...

Temperature: 0 °C - 30 °C

T42 Temperature Sensor Thru-hull Our high-precision temperature sensor has been redesigned with a 26 mm (1") bronze button on the face for a quick, 15 second thermal ...

Temperature: 0 °C - 30 °C

T80 Temperature Sensor Transom or Bulkhead Mount The T80 stainless steel model can be mounted on a vessel's transom to measure water temperature. It can also be used in a live well ...

Temperature: 0 °C - 30 °C

... response to changes in water temperature. Simply overlay the nautical chart or sounder screen with the temperature readout and watch for temperature changes and fish strikes. Marking ...

Temperature: -30 °C - 110 °C

The ADB series bearing sensors are specially designed to enable depth adjustment of the sensors based on the application. Various versions are available with probe lengths of 50, 100, 200 and 300 mm. ...

Temperature: -40 °C - 120 °C

Milli-Temp Bearing Sensor The Milli-Temp series can be used on any application where bearing temperature monitoring is needed. The Milli-Temp is a loop powered analog sensor with ...

Temperature: 80, 60, 70, 90, 50 °C

... or Pt100 RTD type for continuous temperature monitoring, and a PTC thermistor model with the following trip points (specify when ordering): 60°C, 70°C, 80°C, 90°C for step (Cold/Hot) temperature monitoring. The ...

Temperature: -10 °C - 80 °C

Features Temperature Transmitter Room A Type High-sensitive Temperature sensor Compact type High Reliability

Temperature: 0 °C - 80 °C
Probe diameter: 22 mm

Temperature Sensor (FL-TF 80 S/M) For usage in mixers, aggregate silos and cement weighing systems Usage and applications In the concrete and precast industry. For all common mixer types, aggregate ...

Temperature: -50 °C - 500 °C
Probe diameter: 4.5, 2, 3, 6 mm

... and low cost effective way for sensor manufacturers to produce complete assemblies. • The sensor manufacturer simply takes the part built RTD and fits it into a handle, pot seal, terminal head etc. to ...

Temperature: -40 °C - 400 °C

SPECIFICATION Recommended Operating Temperature: -40 to +400°C Class: 1/3 DIN, A and B Measuring Current: Max 2mA Material of leads: Gold plated Nickel. Tolerances in accordance with JIS C 1604 and IEC751. Temperature ...

The Wire Wound Ceramic Resistive Temperature Detector (RTD) or the PT100 of Temperature Technology Ltd. offers a wide range of stocking simplex to duplex framework wire wounds for temperature ...

Temperature: -100 °C - 100 °C

... Data Logger with LCD and Ultra-Low Cryogenic Temperature Probe High-accuracy ultra low temperature data logger for monitoring vaccines in cryogenic dry ice storage This high-accuracy ...

Temperature: -10 °C - 200 °C

... + 200°C *Probe measures Ø6 x 90mm long stem with Ø12 x 10mm tip. *Dual Purpose for liquid and surface temperature measurement *Ribbon band sensor sealed with Silicon Rubber compound to ensure the probe ...

Temperature: 0 °C - 1,700 °C

... conductors containing platinum and rhodium alloys and are suited for measuring high temperatures up to 1700°C. Application Notes: *High temperature platinum temperature sensor *Designed ...

Temperature: -200 °C - 2,320 °C

... according to operating conditions. The maximum operating temperatures given in the catalogue apply to the conditions where operating medium is air. Although the exceeding of the maximum temperature limits ...

For code generation for L type thermocouple selection, the straight type thermocouple coding list is used Type L thermocouple drawing can be TC06 or TC07. As you can see in the drawing below, L1 size is Immersion length.In the L-type ...

- STANDARD CODE It is coded with digits and letters containing the drawing number and 5 separate pieces of information. - ADDITIONS TO STANDARD CODE In addition to the technical specifications contained in the standard codes, ...

Process pressure: 5, 2 bar

... ensure that the sensor is leak proof. Combined with the sealing gland that comes with the sensor this makes the sensor fully oil-tight. Different sensor configurations ...

Temperature: -50 °C - 250 °C
Process pressure: 2, 5 bar

... transition piece has multiple oil barriers to ensure that the sensor is leak proof. Combining the sensor with the optional sealing gland makes the sensor fully oil-tight. Different ...

Temperature: -30 °C - 150 °C

The STD duct temperature sensor measures the duct temperature from -30 up to +150°C of air and liquid media.The range is available with all type of current sensor elements.

Temperature: -30 °C - 90 °C

The STS screw-in temperature sensor measures the temperature from -30 up to +90°C at a max. pressure of 16 bar of air and liquid media

Temperature: -30 °C - 60 °C

The STR temperature sensor are designed in a modern housing measures the temperature from -30 up to +60°C . The range is available with all type of current sensor elements ...

... the surface temperature of miniature electronic components. The TPK-04 is capable of measuring a temperature range of -50 to 500°C and is characterized by its quick reaction probe. Meanwhile, the ...

Temperature: -50 °C - 800 °C

... 50℃ ~ 800℃/-58℉ ~1472℉ General purpose needle type with stainless point head. measuring internal temperatures of liquids, semi-solids such as oils, rubbers, plastics, power, clays, meats, fruits, ...

Temperature: -50 °C - 500 °C

K Type Temperature Thermocouples with TPK-04L / TPK-04LS product IDs are designed for various applications. The TPK-04LS features 90 degree short angle surface probe. Its temperature range is -50 ° ...

Temperature: -40 °C - 80 °C

The BeanDevice® ONE-T is a wireless temperature data logger providing a storage capacity of 1 million data points. Thanks to a small (119x35x35mm) and waterproof (IP67 |Nema 6) casing and a powerful radio design enabling ...

Temperature: -50 °C - 150 °C
Probe diameter: 6 mm

Digital Temperature sensor , I2C output, ( -50+150 )°C Assembled in Germany with swiss-made sensor from IST AG Material Case AISI304 Length case 40mm Section case 6mm Cable: Shielded ...

Temperature: -70 °C - 380 °C

... versions only). The BeanDevice® ONE-TIR is suitable for the following applications: • Railway temperature control • Industrial temperature control of moving parts • Gas detection • Plastic, ...