- Detection - Measurement >
- Electrical Measurements >
- Tester
Testers
With its high-energy broadband radiation source, the battery-operated FlameGard® 5 Test Lamp is precision-designed to test MSA's FlameGard® 5 MSIR, UV/IR, and UV/IR-H2 Flame Detectors. The rechargeable test lamp provides a radiation source ...
The TR5001E SII provides an economical, customizable solution that can fully meet the testing requirements of most customers. The TR5001E SII incorporates MDA with selectable ICT and Functional test capabilities that cut production line ...
All-in-one test platform for comprehensive lens testing at field points Benefits • Wavefront measurement on- and off axis • Accuracy lambda/20 peak-to-valley • Semi-automatic measurement processes • Measurement of chromatic effects • ...
Precise wavefront measurement of plano optics at different wavelengths Benefits • Measurement of the transmitted wavefront of plano optics • Complete Zernike analysis • Change of test wavelength • Additional high-resolution control ...
If you search for a device that is made for transportability and use on-site, the combined Mini-Charger-Tester is the natural choice. The device simulates vehicle signals of the charging standards DC-CCS and/or CHAdeMO, ...
In case your focus is on End-Of-Line (EOL) testing in production you should opt for this tabletop version: it‘s designed to be operated with an End-of-Line test bench to find out if the EVSE is working as expected. Of course the tabletop ...
Your demands are even higher? If your focus is on End-Of-Line (EOL) testing with high power charging, the Mini-Charger-Tester EOL HPC can still be installed in a single, rollable rack for loads of up to 120 kW. If you ...
... environmentally responsible way to test your ARFF vehicle’s foam system. The ECOLOGIC® mobile test system is an input-based testing system designed to provide fire departments the means to test the accuracy of their ...
This is a high-precision and high-performance battery tester. It can set parameters in the computer software. It can charge and discharge various batteries for testing battery capacity/voltage/current, and do battery ...
MIT flexure tester is a new instrument developed by our company according to the national standard GB/T 2679.5-1995 (determination of flexure of paper and cardboard). The instrument has the standard in the parameter test, ...
Measures insulation resistance with 3 different voltage rating: 200 MΩ / 250 V 200 MΩ / 500 V 2000 MΩ / 1000 V 750V AC /1000V DC voltage measurement Sound continuity measurement 200 Ω / 200 kΩ resistance measurement Features Wide ...
Approved leakage testing system for differential-pressure method or relative-pressure method. • 64 test programs storable • text indicator on the LCD-display in different languages • with statistical evaluation ...
Dr. Wiesner
Cost-efficient single-purpose leakage testing device for differential-pressure method or flow testing • available in many variants • for overpressure or vacuum • serial interface RS232 as standard • optionally including ...
Dr. Wiesner
Cost-efficient single-purpose leakage testing device for relative-pressure method for overpressure or vacuum • compact size • serial interface RS232 as standard • optionally including digital I/O interface The leakage ...
Dr. Wiesner
The TCC-B is a single adjustable circulator bath with position for four jackets to test the cloud and pour point manually conform ASTM D97 and ASTM D2500. The TCC-B is a low temperature circulator that can reach temperatures down to -88°C. ...
BATTERY TESTER BT3554 (Built-in Bluetooth® wireless technology) Even Speedier Diagnosis of the Deterioration of Lead-acid Batteriess Overview Hioki portable battery testers support the maintenance ...
HIOKI EUROPE GmbH
BATTERY HiTESTER BT3564 1000V Maximum Input Voltage, High-Voltage Battery Tester for Measuring EV and PHEV Battery Packs Overview Hioki benchtop battery testers support simultaneous high-speed ...
HIOKI EUROPE GmbH
... Overview Hioki benchtop battery testers support simultaneous high-speed measurement in the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries. The BT4560 battery impedance tester ...
HIOKI EUROPE GmbH
•5 inch LCD with backlight, the largest screen in the industry •Handheld, rugged design, easy to operation •Particular history and real-time LED indicator design, find troubles more clearly •Smart auto configuration feature •Alarm ...
Shaanxi Aitelong Technology Co., Ltd.
•DSL Physical layer test •PPPoE Dialing (RFC 1683, RFC2684, RFC2516) •Telephone Function •Ping Function (WAN&LAN) •Setup System Parameter: backlight time, shut off automatically time without operation, press tone •Check Dangerous ...
Shaanxi Aitelong Technology Co., Ltd.
SAT-3300 Ethernet analyzer is a multifunctional hand-held integrated Ethernet data tester equipped with various physical interfaces for tests on E1, V.35 and 10M/100M/1000M Ethernet. It is portable and easy to operate. ...
Shaanxi Aitelong Technology Co., Ltd.
USB Charger Testers Plug-and-play testers connected to USB ports of each aircraft seats to test the EMI and power behavior of the aircraft while draining the maximum power out of the USB ports.
220 – 250 V Slotted blade, concave ground Extra long handle, 92 mm With clip Defective glow tube not replaceable according to VDE Round blade Plastic handle DIN VDE 06800-6 Made in Germany Output: ...
Hazet
50V to 1000V Insulation tester, 600V TRMS Multimeter Model MW9090 Test voltage: 50V, 100V, 250V, 500V, 1000V Insulation resistance: up to 20Gohms Measurement of Polarisation Index (PI) and Dielectric ...
SEFRAM INSTRUMENTS
LCD voltage and continuity tester Model SEFRAM66 The new SEFRAM66 is an easy-to-use instrument. The SEFRAM66 has been designed, tested and approved according to the EN61243-3 standard. Designed with IP2X test ...
SEFRAM INSTRUMENTS
Voltage and continuity LED tester Model SEFRAM40 The SEFRAM40 is an automatic, compact, reliable and robust voltage tester. It can measure voltages up to 690 V, with the following functions: ...
SEFRAM INSTRUMENTS
wear test unit for Shoes made out of solid aluminium and stainless steel. quality made in Germany. unit designed for operation at a closed climatic chamber system. inclusive our delivery is one safety door switch to stop units if door ...
Bulk Current Injection (BCI) is a test procedure to proof the immunity to electrical disturbances by narrowband electromagnetic energy. The test signal is injected by means of a current injection probe physically being a current transformer ...
Stand-Alone Leak Testing Units for Assembled Stacks Benchtop or free-standing frame with integrated mass flow controllers for accurate leak characterization. Includes PC with Greenlight's Emerald™ software for automated control and datalogging.
AKUSTRON measures the air permeability of filter papers, nonwovens and textile fabrics within seconds. Easily transportable, this unit is ideal for monitoring material on the production line, inspecting incoming material on-site and on-going ...
THWING-ALBERT Europe
The Regmed CT-21 Crush Tester is designed to perform standard TAPPI fiberboard tests such as Flat Crush, Edge Crush, Ring Crush and Pin Adhesion. Details - The CT-21 Crush Tester is designed ...
THWING-ALBERT Europe
The mechanical version of the ProTear® Tear Tester. This tear tester provides the same pendulum configuration without the electronics. It is designed for easy capacity changes, with a range of 400 - ...
THWING-ALBERT Europe
0.001 Ohm high resolution 99 groups of resistance measurements can be stored Alarm function setting: from 1 Ohm to 100 Ohms Leakage current and the current 1mA-40A of the neutral line Large-caliber 45mm×32mm precise measuring probe Digital ...
MTP Instruments Inc
1 mA test currrent for meg ohm range at rate voltage Large dual display with backlight Test hold function for easy operation Over range indication Low battery indication
MTP Instruments Inc
Designed to test the integrity of electric heated floor systems Tests insulation, resistance and continuity (Megohmmeter / Ohmmeter) Large LCD with dual display screen (digital readout with analog bar indication) Auto discharge Manual ...
MTP Instruments Inc
The G939 Series was developed in accordance with the quality standards required by national and international metrology regulatory organizations to allow moisture control throughout the process, either in harvesting, drying, storage and ...
SCITEQ's Point Load tester is used for determining the resistance to slow crack growth of polyethylene pipes with external point load. The PLT system complies with PAS 1075:2009 Annex A3. PAS 1075 defines characteristics, ...
... resistance testers in Eagle Eye’s portable battery tester line. The IBEX-Series is the fastest internal battery resistance tester/portable battery tester in the industry ...
Eagle Eye Power Solutions
A manikin designed for recording in-vehicle noise for sound quality evaluation and testing. Also used for sound optimisation of consumer appliances, office equipment, power tools, marine equipment and heavy machinery. Manikin designed ...
TTC is a device that verifies the correct engine timing belt tensioning, engineered according to Ducati specifications and specifically devised for Ducati bikes. Tensioning the timing belt correctly is a fundamental step in order to ...
... Combine thermal, radiometric and photometric testing of LEDs Together with Simcenter Micred LED Tester thermal characterization hardware, Simcenter Micred LED Tester temperature-controlled test stage ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining