Testers

... PTBA 211E ampoule breakpoint tester to control the quality during production of empty ampoules The PTBA 211E ampoule breakpoint tester is designed and manufactured in compliance to the DIN EN ISO standard. According ...

... Tapped Density and Apparent Density Testing Instrument The PT-TD300 is used to test the tapped (or “tamped”) density and apparent density of powders, granules, pigments and similar products in compliance with the current USP methods 1 and methods 2 ...

The SPT-6 Suppository Penetration Test assembly is used to determine the softening time of six samples at the same time. It is connected to a Pharma Test PTZ AUTO or PTZ-S tablet disintegration test instrument. The SPT-6 assembly can also be immersed ...

Passi Test Plus is a tool designed to assess the real quality of stainless steel. It consists of a “probe pen”, which contains the electrochemical solution, and an external storage unit. By pressing the probe pen on the surface, Passi Test Plus measures ...

Passi Test is a tool designed for those who need to know exactly the real quality of the stainless steel. It consists of a “probe pen” – which will be put on the superface to be tested – containing the electrochemical system and a reading external unity. ...

... The Pile Integrity Tester (PIT-Q) assesses the structural integrity of drilled shafts/bored piles, ACIP/CFA and drilled displacement piles, driven concrete or timber piles and concrete filled pipes. The PIT-Q performs wave equation-based, ...

... Product Introduction
W416 2.0 Infrared Water Vapor Transmission Rate Tester is an upgraded high-precision instrument developed according to GB/T 26253, ASTM F1249 and related international standards. Based on patented infrared ...

... Product Introduction
This instrument is developed, designed and manufactured on the electrolytic test principle in accordance with GB/T 21529, ISO 15106-3 and related standards. It measures the water vapor transmission rate (WVTR) of samples ...

... Product introduction
W203 2.0 is developed on the electrolytic test principle and is designed and manufactured in accordance with GB/T 21529, ISO 15106-3 and other international standards. It measures water vapor transmission rate (WVTR) of ...

... With more and more photovoltaic applications and larger scale of power stations, more and more problems of solar cell modules have been exposed, such as power reduction, poor insulation and delamination. After years of research, it has been found that ...

... adopted for test product mounting and clamping, which is convenient and safe to operate. A simulated transportation vibration tester is used to test the anti-vibration capabilities of large pieces of furniture, household appliances, ...

... Summary
Measures the minimum film forming temperature (MFFT) of water‑based coatings, including latex, emulsions and adhesives. Operating range -10°C to 90°C. Platen dimensions 483 mm × 235 mm. Integrated air drying system and water cooling. ...

... Product overview
The Universal Friction Tester (UFT) by Rhopoint Instruments is a benchtop instrument for fast, repeatable measurement of static and dynamic coefficient of friction (COF). It supports peel, tear and seal integrity ...

... Product description
CIT27-10S Self-Accelerating Decomposition Temperature Tester performs adiabatic storage tests to determine the temperature-dependent heat generation rate of substances and to establish the Self-Accelerating ...

... description
CIT23-10S liquid auto‑ignition point tester measures the auto‑ignition and flame behavior of liquid chemicals in a uniformly heated vessel at atmospheric pressure. The tester is built to perform tests ...

... Product description
The CIT22-10S solid ignition point tester identifies spontaneous combustion characteristics by placing a solid sample in a steel mesh cube (20 mm side) inside a heating chamber with a controlled temperature ...

... Sonacme technology's battery impact tester tests the safety of the battery through different weights, different heights and different impact areas. After a series of tests on this battery impact tester, the battery must ...

... I. Main technical features 1. It adopts LCD temperature controller, heater and electric stirrer to form the constant bath. The temperature in bath is uniform. The temperature controller has timing function. It can control the test time and automatically ...

... Display 7-inch HD Android touch screen, 1024×600 pixels
Measuring Range Ambient temperature ~ 400°C
Temperature Sensor Class A PT100 (3-wire, with temperature compensation)
Temperature Resolution 0.1°C
Barometric Pressure Accuracy ≤0.5 kPa
Repeatability ...

... Display 7-inch HD Android touch screen, 1024×600 pixels
Measuring Range Ambient temperature ~ 370°C
Temperature Sensor Class A PT100 (3-wire, with temperature compensation)
Temperature Resolution 0.1°C
Accuracy ±0.5°C
Barometric Pressure ...

... The EMF-701A is a magnetic field tester manufactured by TECPEL®. This device is used for fast, dependable, and simple measurement of electromagnetic field radiation levels around home appliances, industrial equipment as well as power ...

... FEATURES: 1. DIM 571 is a LCD Indicated instruments for insulation (M Ohm), Continuity (OHM) and AC Voltage 2. Three Insulation test voltage (DCV): 250V, 500V, 1,000V. 3. Large LCD display(68 x 34mm) 4. Test Insulation at rated voltate into 1 1mA load 5. ...

... The ERT 580 is an earth resistance tester, manufactured by Tepcel. This product is operated with three earth ranges, such as 20, 200, 2,000 Ohm that can measure down to 0.01 Ohm. It is equipped with 2mA RMS one test current and 2 or 3 ...

... The Battery Diaphragms Gas Permeability Tester is based on the differential pressure method (Oken Type), and is professionally applicable to the determination of air permeability of battery diaphragms, breathable films, and other relative ...

... The G101 Gas Permeability Tester is based on the differential pressure method and is professionally applicable to the determination of permeance and permeability of plastic films, composite films, high barrier materials, sheeting, metal ...

... The G103H Gas Permeability Tester is based on the differential pressure method and is professionally applicable to the determination of gas transmission rate and permeability of plastic films, composite films, high barrier materials, ...

... The PST-100 230V high frequency hand-held AC spark tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3mm and 30mm can be tested. The PST-100 is widely used for ...

... The PST-100 110V high frequency hand-held AC spark tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3mm and 30mm can be tested. The PST-100 is widely used for ...

... The ST-AC Pro’ AC high frequency portable AC spark tester provides a quick and effective means of inspecting thicker coatings and linings. It is particularly useful for checking butt-welded and overlap joints on plastic fabrications. The ...

NIDEC-SHIMPO’s Peel Test Grip possesses wide, serrated teeth for securely clamping down on test specimens such as films, tapes, labels or similar materials used in adhesive peel tests. Adjustment screw conveniently opens and closes the serrated teeth ...

NIDEC-SHIMPO’s FG-WTG4B Wire Terminal Pull Grip with rotating turret is a simple, yet versatile force test stand attachment utilized in testing the tensile strength of various size wire-terminal assemblies. Each unit possesses 12 openings of various widths ...

NIDEC-SHIMPO’s Compression Ball Adapter Set is a simple, yet specialized force gauge attachment for testing compression forces over a specific area. These adapters are ideal for use with shape-changing materials such as foam, rubber, sponge, but can also ...

... Non-Contact Ground Resistance Measurement No Auxiliary Electrode Needed Ground Resistance Measurement: 0.025 – 1500Ω Leakage Current: 0.3mA – 30A, True RMS Jaw Diameter: 23mm Programmable High and Low Alarm Data logging capacity: 116 records Programmable ...

... Non-contact ground resistance measurement: 0.025Ω ~ 1500Ω No auxiliary electrode needed Leakage current measurement: 0.3mA ~ 35A, True RMS Jaw diameter: 35mm Programmable High and Low alarm Programmable data logging Data logging capacity: 116 records Data ...

... 0~1400μm Accuracy: 2.5% Automatic ferrous or non-ferrous substrate material measurement Non-magnetic coating on ferrous metal substrate and insulating coating on non-ferrous metal substrate measurement Audible and visual warning when tolerance limits ...

This machine is widely used for the testing of impact strength test of plastic pipe materials and pipe components, and also suitable for the external loads impact strength test of plastic board, glass fiber reinforced plastic and kinds of Hard non-metal ...

FIT1130 Falling dart impact testing machine applies to impact test for all kinds of plastic film and sheet. It confirms to ASTM 1709-04, ISO7765.1-1988 “Plastic film and sheet- Determination of impact resistance by the free-falling dart method” standard. ...

... CDV BT SVVI will allow you to conduct the leak detection tests necessary to comply with sanitary and quality requirements of the food, cosmetic and or pharmaceutical industry. They are equipped with a system controlled by a digital display that allows ...

... CDV FS SVVI will allow you to conduct the leak detection tests necessary to comply with sanitary and quality requirements of the food, cosmetic and or pharmaceutical industry. They are equipped with a system controlled by a digital display that allows ...

... The Corrosion Test Apparatus is developed to assess the amount of acid gas generated from the combustion of materials by measuring the pH & electrical conductivity. The test specimen is pushed into a tube furnace and burned for 30 minutes. The generated ...

... The Molten Metal Splashes Impact Tester, in accordance with ISO 9150, is designed to access the performance of materials used for protective clothing when materials are impacted by the small molten metal splashes. This test method ...

The cupping testing machine is used to test extend and stretch capacity of metal thin plate and band. It is the only instrument to test the metal’s plastic deformation. Also it can be used to test non-ferrous metals anisotropic character if adding impact ...

... Methylene Chloride Tester is used to determine the resistance of PVC-U pipes to dichloromethane at a specified temperature. Standard: ISO 9852,EN580 Specification: Stainless steel inner tank Dia: 340mm, height: 280mm Sample ...

... Vicat Softening Point Apparatus is used to determine heat distortion temperature and vicat softeningtemperature of high polymer materials, plastic,rubber etc, as an index of controlling quality and identifying thermal property of new products. Sample ...

... •Reproducible measurement of wear and scratching restistance •Fast and easy measurement of layer thickness •Comfortable operation •Suitable for hard material films, lacquers, plastic coatings etc. •For quality assurance and coating developmentt Ball ...

The DX-2012F is a multi-dimensional, high-precision, fully automatic digital magnetic field measurement system designed to map three-dimensional AC and DC magnetic field distributions for objects and volumes of arbitrary shape. It acquires, visualizes ...

... evaluation and testing of ferroelectric and piezoelectric materials and related devices.

DXPCT-A pyroelectric coefficient tester
The DXPCT-A integrates heating, measurement fixture, display and control software in a single ...

... The Curie temperature tester determines the critical temperature (Curie point) at which a ferromagnetic material transitions from ferromagnetism to paramagnetism during heating. It monitors sudden changes in magnetic permeability or the ...

... Based on a technical problem, we will develop a concept for you to record the required quantities. Our spectrum ranges from small manual test systems to fully automatic test systems. We offer special testing facilities in the following areas: • ...

... Strength test of a ultrasonic welding Customized Solution  Component supply and emissions over hand-operated turret Application • Quality assurance in the electronics industry. • Batch testing; Test equipment for testing and optimization ...

... Proxy Tester is a portable instrument created to satisfy the needs of both installers as well as retailers. It makes it possible to control correct functioning of any D.C. sensor or magnetic sensor even when lacking expensive sophisticated ...

... ring stiffness tester is used to determine the ring stiffness of circular cross-section thermoplastic pipes, according customer’s request, it can also execute compression, ring stiffness, ring softness and creep ratio test. This tester ...

... The pipe opacity tester can be used to determine the impermeability determination of plastic pipes and fittings (showing results as a percentage). The instrument is controlled by an industrial touch screen and operated by a touch screen. ...

... The GBS-60 model is a digital display Erichsen cupping tester that is ideal for use testing the ductility of metallic sheets and strips. The unit has been developed to comply with the ISO 20482:2003 standards. It has a 6.4 inch LCF screen ...

... GBW-60B Computer Control Cupping Testing Machine GBW-60B computer control cupping testing machine mainly for the test of the metal sheet and strip, according to the national standard GB / T 4156-2007, it can test the plastic deformation properties of ...

... BT-60 Manual Cupping testing machine Cupping testing machine, designed according to GB/T 4156-2007, is used to evaluate the resistance of metal materials to the anti-cracking or anti-separation of metal substrates after being subjected to the indentation ...

... thanks to its reliability, ease of use, and low operating cost. Description ATS Tube Seal Tester – A destructive test to guarantee quality The ATS seal tester is designed to evaluate the quality and strength of tube ...

... The ATS-Booste tube crusher allows to test, by crushing, the resistance of samples such as bags, pouches, promotional samples, Equipped with adapted and customisable pressers. This 100% pneumatic device requires no maintenance or servicing. Safety ...

... The ATS-X is the electronic weld integrity inspection tool for plastic and metalloplastic tubing, and veriies that there is no leakage under the effect of a crushing force applied to the test sample. Like ATS, ATS-X is necessary for reliable and accurate ...

... Hydrostatic Pressure Tester is mainly used for long-term internal pressure resistance test and hydraulic instantaneous burst test of various fluid transportation pipes such as thermoplastic pipes, composite pipes, steel pipes, engineering ...

This instrument is widely used to measure the impact resistance of various plastic pipes (such as water supply and drainage pipes, sewage pipes, gas pipes, communication pipes, such as PVC, PE, etc.). It is an ideal testing instrument for testing institutions, ...

... The JJRST series ring stiffness tester is suitable for the measurement of the ring stiffness of thermoplastic pipes with a circular cross-section, as well as for flat test and ring flexibility test. Meet the requirements of testing standards ...

... Pull-off Adhesion Testers Measures adhesion of coatings to metal, wood, concrete and other rigid substrates. • Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583 • Environmentally sealed enclosure—weatherproof, ...

... Measures adhesion of coatings to metal, wood, concrete and other rigid substrates. • Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583 • Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds ...

... Determines a coating's ability to resist separation from a substrate when a lattice pattern is cut into the coating in accordance with ISO 2409 and ASTM D3359 • Includes all tools and accessories required for cross hatch testing • Ergonomic tool handle ...