DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C
... Technical Advantages of Triple Eccentric Butterfly Valves Better trade-off of mass, face-to-face and nominal diameter than other types of metal/metal valves (ball valves, gate valves, ...
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
DN: 0.312 mm
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 turns of precision adjustment, and maximum flow approximately ...
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
... Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) - Central heating ...
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve and/or control ...
DN: 10 mm - 80 mm
Pressure: 25 bar - 64 bar
Temperature: -20 °C - 150 °C
... ball valve GENERAL FEATURES: • The valve is suitable for medium pressures on condition that non aggressive fluids are used. • Working pressure: see diagram. • Fluid range: air, water, oil, gas, petroliferous and petrochemical ...
OMAL Spa
DN: 200 mm - 1,000 mm
Pressure: 10 bar - 16 bar
Temperature: 0 °C - 200 °C
... Metso Mapag BO series butterfly valve is designed for Vacuum Pressure Swing Adsorption plants (VPSA). It is a wafer type, soft seated, high performance, single eccentric disc valve. The ...
DN: 0.063 in
Pressure: 125 psi
Temperature: -20 °F - 160 °F
... “300” Series Cartridge Valves are ideal for manifold systems and applications where space is limited. These 3-way normally closed valves are made from brass and electroless nickel plated for corrosion resistance. Choose ...
DN: 40 mm
Pressure: 0 bar - 0.6 bar
Temperature: 5 °C - 90 °C
... 2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated having a single chamber valve ...
A. u. K. Müller
DN: 0.5 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
... Certificates: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL
DN: 25 mm - 400 mm
Pressure: 3 mbar - 200 mbar
Temperature: 0 °C - 140 °C
... Safety: Guided valve disc allows reproducible closing and sealing after activation. Time savings: The pneumatic venting allows easy integration of the valve in a fully-automated cleaning cycle (CIP, SIP). Flexibility: ...
... The air and vacuum valves are units manufactured by Famat. Designed with a body made up of ductil iron, cast steel, and stainless steel, the valves are capable of guarding huge water transmission vessel ...
DN: 1.5 in - 2.5 in
Pressure: 41.4 bar
Temperature: 400 °F
... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The three-piece valve is ideal for hot/cold water, numerous gas applications, compressed air, vacuum service, condenser and chilled ...
NIBCO
DN: 50 mm - 400 mm
Pressure: 16 bar
Temperature: 50 °C
... stem sealing - With triple O-ring sealing - Low wear due to wedge guiding and elongated stem bearing - Suitable for vacuum of up to 90% ...
VAG-Group
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 215 °C
... These valves are designed for the use with Steam, Hot Water, Cold Water, Air, Gas or on Vacuum Service. This valves are especially made for manifold block application. The design based on the long field ...
AIRTEC Pneumatic
DN: 25, 15 mm
Pressure: 5 mbar - 4,000 mbar
Temperature: 130 °C
... Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from the vessel), to control product contamination against external air that may fill ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm
Pressure: -1 bar - 16 bar
Temperature: -20 °C - 80 °C
... 2/2-way ball valve with male thread Medium: Compressed air, vacuum, inert gases Material of casing: Brass nickel-plated Material of nut: Brass nickel-plated Material of seal: NBR Material of ...
Mader
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
... pneumatic actuator GUILLOTINE VALVES Excellent seal in case of fine or powdery products. The pneumatic control is integrated in the frame PRESSURE RELIEF VALVES (VCP and VHS types) Pressure and vacuum ...
DN: 1.25 in - 4 in
Temperature: 100 °C
... 3-way high flowrate vacuum valve VACUUM/ VACUUM BREAKER valve when used with vacuum pumps DIVERTER VALVE when used with blowers Advantages • ...
MAROS Engineering
... The Protectoseal Series No. 8540H, End-of-Line Pressure / Vacuum Conservation Vent, is intended for use where both pressure and vacuum relief are required. The pallets in the vent housing allow intake of air and escape ...
Gascat
Flow rate: 500 us gal/min
... Innovative Engineering to Save Money and Increase Scrubber Overflow Reliability New Bionomic ScrubSeal Vacuum Overflow Valves are the perfect overflow and vacuum seal solution to replace troublesome ...
DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C
... Vacuum resistance Design and manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive ...
Pressure: 0 bar - 16 bar
Flow rate: 40 l/h - 200 l/h
... gas chlorine pressure reducing valve is used to sink down the unregulated gas pressure to a steady operating gas pressure. The pressure reducing valve secures pressure independent operation of Vacuum ...
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_ valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_ valve_body: ...
the best suppliers