DN: 16 mm - 50 mm
... Manually operated
valve with bellows shutter; the 90° angle allows replacement with an elbow or tee fitting.
Product details:
- Line: KF
- Line type: KF
- Type: Valves
- Finish:
DN: 10 mm - 25 mm
... Inline
valve with a manually operated diaphragm shutter, suitable for flow regulation in small-diameter lines.
Valve body in aluminum and
seals in Nitrile-butadiene (NBR).
Available items:
- Code:
DN: 10 mm - 50 mm
... ball
valve equipped with AISI 304 flanges and Teflon®
seals. Natural finish.
Main details
- Line: KF
- Line type: KF
- Product type: Valves
- Finish: Natural
- Materials:
DN: 100 mm - 1,000 mm
Pressure: 0.5 bar - 10 bar
Temperature: -40 °C - 800 °C
... Flowrates‘ welded square section knife gate valves are specifically designed for the precise control of solids, powders, and bulk materials. Their unobstructed flow design ensures smooth and continuous discharge, reducing material build-up ...
DN: 32 mm - 1,200 mm
Pressure: 6, 10, 16, 25 bar
... through a dual primary and secondary seal system. Vulcanized lining molded under 150-bar pressure, ensuring perfect adhesion and extreme durability. Full corrosion protection: The lining completely covers the valve ...
DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C
... Technical Advantages of Triple Eccentric Butterfly Valves Better trade-off of mass, face-to-face and nominal diameter than other types of metal/metal valves (ball valves, gate valves, ...
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic materials • Connector ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing ...
DIVATEC,SL
DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
... To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DIVATEC,SL
DN: 0.312 mm
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 turns of precision adjustment, and maximum flow approximately ...
DN: 40 mm - 1,600 mm
... hydraulic actuators to the valves. But what is the difference between WAFER butterfly valves and LUG butterfly valves? The WAFER butterfly valve is mounted between two flanges ...
DN: 0.5, 1, 0.125, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
... exhaust valves SR are used to exhaust the pressure of the chambers of a pneumatic cylinder directly into the atmosphere, growing the speed of the cylinder to the maximum. They have the body and the components in anodized aluminium, ...
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
... Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or nitrogen control ...
Ralston
DN: 8, 12, 10, 6 mm
Pressure: 4, 10 bar
... isolation valve John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant ...
DN: 0.5 in - 4 in
Pressure: 232, 355 psi
Temperature: -20 °C - 180 °C
... Stainless Steel, Clamp, Position Indicator Dimensions to DIN32676, 3A Control Pressure: 4-6 Bar ...
Taloar
DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C
... 2/2-way, latching cartridge valve with a nominal orifice DN 5 and a mechanical valve actuation. The valve opens and closes by manual actuation, like a biro at the push of a button. In addition, in this ...
A. u. K. Müller
DN: 50 mm - 300 mm
Pressure: 16 bar
Temperature: 65 °C
... Gate valves, Gate valves oval body F5, Gate valves oval body F5 on nodular cast iron PN 16 (EN-GJS-400-15), Valves for drinking water ...
Mival
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C
... adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS (Praher Labelling System) Version with plastic screws available on request Seal ...
Praher Plastics Austria GmbH
DN: 40 mm - 600 mm
Pressure: 10, 16 bar
Temperature: 50 °C
... Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 15 for sea-water applications. Proven design with innovative improvements, such as plastic sliding caps on the wedge, guarantee low operating ...
DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C
... anodized), seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve ...
DN: 18 in - 30 in
Pressure: 0.2 bar - 0.9 bar
Temperature: 1 °C - 42 °C
... Noryl valve body,long service life,anti-corrosion,low cost. Classic piston, seal and spacer design, more reliable and less failure. High flow rate for commercial softening and filtration application. Valves ...
DN: 25 mm - 150 mm
Pressure: 0 bar - 22.7 bar
... conditions - Valve disk with balancer: Reduces pressure surges when closing in the direction of flow The cone-shaped valve disk ensures a gentle transfer of the product - Metal stop for the valve ...
Evoguard GmbH
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve is done by the ...
DI NICOLA INFINAM
Pressure: 0 bar - 300 bar
Temperature: -10 °C - 80 °C
Flow rate: 50 l/min
... CETOP 3 modular single-way flow regulating valve, not compensated. Type for regulation inflows ...
DN: 200 mm - 1,600 mm
Pressure: 10 bar - 40 bar
... shut-off valves such as butterfly valves and gate valves are used to regulate the flow, although they are not suitable for throttling purposes. This improper use damages the material and considerably ...
DN: 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 100 °C
... mechanical PEKI valve series has been manufactured for decades from high-quality hot pressed parts and precision turned parts, which are assembled with modern injection moulded parts and sealing elements from German production. PEKI valves ...
PVA Schwimmerventile GmbH
DN: 1.5 in - 80 in
Pressure: 2.2 MPa
Temperature: -29 °C - 425 °C
... ATHENA manufactures a wide range of eccentric butterfly valves, including double eccentric butterfly valves and triple offset butterfly valves, as well as other high performance butterfly valves. ...
Athena Engineering S.r.l.
DN: 1 in - 10 in
Pressure: 0 bar - 420 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation of the Line ...
DN: 0.5, 0.75 in
Pressure: 6 bar
Temperature: 0 °C - 80 °C
... standard connection ISO 228/1; in order to improve hydraulic seal has decided to create its own internal regulations, based on a soft conical thread. Therefore it is noted that to ensure the hydraulic seal declared it ...
Bucchi S.r.l.
DN: 6 mm - 50 mm
Pressure: 0.6 MPa - 0.8 MPa
Temperature: -20 °C - 100 °C
... response. Precision-machined valve stem and low-friction bearings provide smooth operation, reducing wear and extending service life. 3. Exceptional Sealing Performance – Zero Leakage Design Utilizes PTFE or Viton seals, ...
DN: 1.25 in - 4 in
Temperature: 100 °C
... 3-way high flowrate vacuum valve VACUUM/VACUUM BREAKER valve when used with vacuum pumps DIVERTER VALVE when used with blowers Advantages • Rapid vacuum interception and interruption • Remote ...
MAROS Engineering
the best suppliers