Wire-wound inductors

Primary current: 0 A - 35 A
Voltage: 500 V

The CITEL 75 Vdc Surge Protector are available with 1-pole and 2-pole with remote signaling. It has a discharge current capability of 20kA equivalent to In and 40kA equivalent ti Imax. This product are created to control the operation ...

... technique provides minimum possible size and gives excellent dynamic and DC cross-regulation. Contact factory for these special inductors. Handle large transient DC currents Minimum possible size Manufactured to ...

Nominal inductance: 2 x 1 mH (4mH series) Rated current: 85Arms @50Hz RMS Ripple current: 5Arms @ 5 kHz Temperature class: F (155°C) Core Material: GO electrical steel Winding: Aluminium Weight: 38kG Environment: PD3A Fire / smoke ...

Nominal inductance: 15 µH DC current: 600A Ripple current: 12Arms Frequency ripple current: 22 kHz Temperature class: H (180°C) Weight: 5.4Kg Core Material: GO Electrical steel 23/100 Winding: Aluminium foil

Primary current: 5 A - 1,000 A
Voltage: 230, 400 V

• Copper and Aluminum winding • High efficiency sheet core • Varnishing under vacuum • Oven drying at high temperature • Three Phases and single Phase • Harmonic Filter Reactors • Line reactors • Motor reactors • ...

Primary current: 4 A
Voltage: 400 V

Rated current 3 x 4 - 3 x 900 A Insulation class H Inductance7,350 – 0,024 mH Short-circuit voltage (uK) 3 %, 4 %, 5% Rated voltage 3 x 400 Vac, 3 x 480 Vac Degree of protection IP 00 Ambient temperature +104 °F / +40 °C Benefits ...

Primary current: 2 A - 100 A
Voltage: 400 V

... manufactured of high standard materials: Core made of grain oriented, cold-rolled laminated steel sheets and windings made of copper wire with temperature class H (180°C). Modern welding techniques gives a low noise ...

Primary current: 0.1 mA - 20,000 mA

Features – Compact design – Low height – Low DC resistance – Suitable for automatic insertion – For reflow and vapor phase soldering Applications Backlight, DC/DC-Transformer, decoupling in RF- and IF-circuits, use in frequency ...

Primary current: 100 mA - 8,000 mA

Features – Compact design – High current-carrying capacity – Low DC resistance – Suitable for automatic insertion – For reflow and vapor phase soldering – Qualified to AEC-Q200 – High operating temperature range Applications Radio ...

Primary current: 18 mA - 12,500 mA

Application Decoupling of high and low frequency circuits, etc. We recommend these Chokes for application in telecommunication, video equipment and electronic data processing systems. Inductance range: 10 μH ÷ 15 mH Tolerance: ± ...

Murata's lineup of inductors for high-frequency circuits features ultra-compact film-type inductors, general-purpose multilayer inductors, and high-Q, high-current supporting wire-wound ...

Primary current: 600 mA

... High Frequency Inductor, 600 mA, .25 Ω DC Resistance, Wire Wound, 0603, 5 %, 1.8 x 1.12 x 1.02 mm, Taped & Reeled, Surface Mount, Sigma 3650 • TE Internal Description: 3650 0603 36nH ...

TDK Corporation (TSE:6762) has expanded its family of flat wire inductors with the high-performance EPCOS ERUC23 coupled inductor series (B82559S*). In such components, two windings share ...

Primary current: 30 A
Voltage: 200 V - 430 V

Lvalue: Lr = 6.3µH @0-30Apk Power: 3.5kW LLC 100-250kHz DCR wdg: 5.5mΩ MAX @25°C Suitable for Automotive EV/PHV AC/DC onboard battery chargers Serial resonant choke for 3.5kW half-bridge LLC Works with Lp = 36µH and Cr = 312nF Frequency ...

Primary current: 30 mA - 450 mA

Wire wound on ferrite Operating temperature: –40°C to +105°C Recommended soldering profile: Reflow 5% tolerance is available on request Applications RF circuits like tuner, transponder etc. RF ...

... cost, and maintains consistent quality. Delta product range includes Power Inductors, Through Hole Power Inductors, High Current Inductors, Couple Inductors, and Molding ...

Features Compact size, low profile Shielded construction allowing for high density mounting Lowest DCR/uH in this package size Manages high transient current spikes without saturation Applications Switch power supplies DC/DC converter Mobile ...

Primary current: 20.5 A - 52.5 A

■ Low loss,small magnetostriction coefficient result in low noise. ■ Flat wire winding, achieving very low DC resistance. ■ Excellent temperature stability,less affected by temperature. ■ Low resistance, ...

Primary current: 0.03 A - 4 A

Low price, wide selection, 2.7μH to 100,000μH, up to 15.5A Option ER Military Screening: per MIL-PRF-15305 Grp.A Non-standard values & sizes, increased current & temp., inductance measured at high freq., cut & formed leads, etc. HL ...

Murata's lineup of inductors for high-frequency circuits features ultra-compact film-type inductors, general-purpose multilayer inductors, and high-Q, high-current supporting wire-wound ...

Primary current: 15 A - 50 A
Voltage: 15 V - 50 V

High Efficiency, High Stability inductors Inductance 5 microHenries to 60 microHenries High Efficiency, High Stability inductors Robust construction Class F Materials Inductances from 5 microHenries ...

Voltage: 1,000 V

As per customer specifications, Circé designs tailor-made inductors that ensure great customer satisfaction. The inductor consists of a winding with several turns. Its role is to store current in an electromagnetic ...

Output reactors exist for the purpose of motor protection. They are located on the output side of frequency converters. Small losses and small size and weight in relation to capacity are typical features for output reactors. KEY FEATURES Single ...

Primary current: 0.17 A - 2.1 A

... termination) series of WW chip inductors, the HQ series has a Q value that is 50% higher on average and a current rating that is 25% higher on average. Wire wound chip inductors ...