Digital power module AIF13WAC series

DCACDC

Overview
The AIF13WAC series delivers 600 W in a full‑brick PCB footprint (approx. 2.4 in x 4.6 in x 0.55 in height), providing a drop‑in upgrade path from 500 W units and simplifying application design. These 600 W AC‑DC full‑brick modules feature full digital control via PMBus, internal inrush current limiting, active current sharing for paralleling and an auxiliary 10 V output for system supplies. They are optimized for contact‑cooled installations such as IP‑sealed enclosures.

Features

• Wide input range: 86–264 VAC, 47–63 Hz
• Nominal isolated output: 48 VDC with 10 V auxiliary (250 mA)
• Output power: 600 W (48 V, up to 13 A)
• Efficiency: up to 94% (typical, high‑line)
• Output noise: 480 mV pk‑pk max
• Internal inrush current limiting and hold‑up HVDC: 380 VDC
• Isolation: 4000 VDC input‑to‑output; 2500 VDC input‑to‑baseplate; 1000 VDC output‑to‑baseplate
• Parallel capability: up to 3 units with active current sharing
• Optimized for contact‑cooled applications

Benefits

• Direct upgrade path from 500 W full‑brick products for higher power density
• Reduced external component count via PMBus digital control and monitoring
• Simplified paralleling with active current sharing and PSU‑good signalling
• Improved system reliability with internal inrush limiting and contact‑cooled thermal design

Specifications (table)
Output Power (W): 600
Input Voltage (V): 86 - 264 VAC
Operating Temperature (°C): 105 degC baseplate (contact‑cooled conditions)
Length (Inches): 4.6
Width (Inches): 2.4
Height (Inches): 0.5
Mounting Type: BMP; Through Hole
Minimum Output Current (A): 0
Maximum Output Current (A): 13
Auxiliary Output: 10 V @ 250 mA
Efficiency: Up to 94% (high‑line)
Warranty (Years): 2

Technical specifications

• Series: AIF13WAC (600 W AC‑DC full‑brick)
• Nominal output: 48 VDC, auxiliary 10 V @ 250 mA
• Max output current: 13 A
• Input range: 86–264 VAC, 47–63 Hz
• Efficiency: up to 94% (typical, high‑line)
• Output noise: up to 480 mV pk‑pk
• Hold‑up (HVDC): 380 VDC
• Output trim range: -20% to +10% Vout (control)
• Isolation: 4000 VDC input‑to‑output; 2500 VDC input‑to‑baseplate; 1000 VDC output‑to‑baseplate
• Parallel capability: up to 3 units with active current sharing
• Thermal: 100% power at 100°C baseplate (contact‑cooled)
• Controls: Full digital control (PMBus), enable, PSU‑good signalling
• Mechanical: full‑brick PCB mount (~2.4" x 4.6" x 0.5")
• Protection/features: internal inrush limiting, optimized for contact‑cooled enclosures