Flow control valve PSCU, PMCU, PSVU, PMVU, PSCO, PMCO series
needlemanualfor air

flow control valve
flow control valve
flow control valve
flow control valve
Add to favorites
Compare this product
 

Characteristics

Type
needle
Operation
manual
Function
flow control
Media
for air
Body
stainless steel, brass
Other characteristics
bidirectional, unidirectional
DN

Min.: 1.5 mm (0.059 in)

Max.: 7 mm (0.276 in)

Pressure

Min.: 1 bar (14.5 psi)

Max.: 10 bar (145 psi)

Temperature

Min.: 0 °C (32 °F)

Max.: 60 °C (140 °F)

Description

These needle-type flow control valves act as unidirectional and bidirectional controllers. The valves are installed in any position and mounted by male thread. The valve body and adjusting screw is of stainless steel (M5); brass banjo collet (G1/8 - G1/4 - G3/8 ports) and insert clamp; controller and ports also have brass and technopolymer, while the seals are NBR Nominal diameter measures M5 = 1.5 mm, G1/8 = 2 mm, G1/4 = 4 mm, G3/8 = 7 mm. It operates on filtered air at 0°C-60°C (with dry air -20°C) at pressures from 1-10 bar operating pressure and 6 bar nominal pressure.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.