- Electricity - Electronics
- Energy: Production and Distribution
- Diesel generator set
- CUMMINS GENERATOR TECHNOLOGIES
- Products
- Catalogs
- News & Trends
- Exhibitions
Diesel generator set QSX15 three-phasestationary50 Hz
Add to favorites
Compare this product
Characteristics
- Motor type
- diesel
- Phase
- three-phase
- Portability
- stationary
- Frequency
- 50 Hz, 60 Hz
- Fuel System
- direct fuel injection
- Cooling system
- air-cooled
- Applications
- industrial
- Options and accessories
- soundproof, EU IIIA emissions-compliant
- Emissions level
- Stage II, Tier 2
- Power in kVA
364 kVA, 400 kVA, 569 kVA, 625 kVA
(494.9 hp, 543.85 hp, 773.62 hp, 849.76 hp)- Rated capacity
291 kW, 320 kW, 455 kW, 500 kW
(395.6 hp, 435.1 hp, 618.6 hp, 679.8 hp)- Rotational speed
1,800 rpm
(11,310 rad.min-1)- Width
1,500 mm, 1,553 mm
(59.1 in, 61.1 in)- Height
2,066 mm, 2,447 mm
(81.34 in, 96.34 in)- Weight
4,130 kg, 5,363 kg, 5,580 kg
(9,105.09 lb, 11,823.39 lb, 12,301.79 lb)
Description
Overview
Highlights
Rated for (kW / kVA) - summary table
Generator models (selected rows)
Notes
Technical specifications
- Engine family: QSX15 — industrial 4-cycle diesel engine designed for commercial and industrial generator sets, delivering regulated power with low emissions and fast load response.
- Alternator options: multiple alternator sizes with selectable motor starting capability, low-reactance 2/3 pitch windings and low waveform distortion with non-linear loads.
- PMG option: permanent magnet generator available to enhance motor starting and short‑circuit fault clearing capability.
- Control system: PowerCommand® electronic control provides system integration including automatic remote start/stop, precise frequency and voltage regulation, alarm and status display, AmpSentry™ protection, output metering, auto-shutdown on fault and NFPA 110 Level 1 compliance.
- Cooling: standard integral set‑mounted radiator system engineered and tested for rated ambient temperatures.
- Enclosures and fuel tanks: optional weather-protective and sound-attenuated enclosures; optional dual-wall sub-base fuel tanks.
- Certifications and availability: configurations available to meet EPA Tier 2 and EU Stage II; regional availability across Africa & Middle East, Asia Pacific, Europe, India, Latin America and North America.
Highlights
- Frequency: 50 Hz and 60 Hz
- Certification: EPA Tier 2, EU Stage II (configuration dependent)
- Typical applications: Prime, Standby, Data Center Continuous
- Regional availability: Africa & Middle East, Asia Pacific, Europe, India, Latin America, North America
Rated for (kW / kVA) - summary table
- Prime: 291 – 455 kW | 364 – 569 kVA
- Standby: 320 – 500 kW | 400 – 625 kVA
- Data Center Continuous: 410 – 455 kW | 563 – 569 kVA
Generator models (selected rows)
- C400 D5e — 50 Hz — Prime 291 kW / 364 kVA — Standby 320 kW / 400 kVA — Diesel — EU Stage II
- C450 D5e — 50 Hz — Prime 327 kW / 409 kVA — Standby 360 kW / 450 kVA — Diesel — EU Stage II
- C500 D5 / C500 D5e / C500 D6 — 50 Hz — Prime ~360–364 kW / 450–455 kVA — Standby 400 kW / 500 kVA — Diesel
- C550 D5 / C550 D5e — 50 Hz — Prime 400 kW / 500 kVA — Standby 440 kW / 550 kVA — Diesel
- C450 D6e / C450 D6 / C500 D6 (60 Hz) — Prime ~409–455 kW / ~511–568 kVA — Standby up to 500 kW / 625 kVA — Diesel — EPA Tier 2 (selected rows)
- DFEK / DFEJ — 60 Hz — Prime 455 / 410 kW | 569 / 513 kVA — Standby 500 / 450 kW | 625 / 563 kVA — Data Center Continuous where specified — Diesel — QSX15-G9 NONROAD 2 on selected configurations — Wide regional availability
Notes
- Power ranges and ratings vary by generator model and selected application (Prime, Standby, Data Center Continuous).
- Multiple configurations exist to match regional certification and application requirements.
Technical specifications
- Engine family: QSX15 (Cummins® industrial diesel)
- Control: PowerCommand® electronic control with remote start/stop, frequency and voltage regulation, alarms, AmpSentry™ protection, output metering and NFPA 110 Level 1 compliance
- Alternator options: selectable sizes, low-reactance 2/3 pitch windings, low waveform distortion, short-circuit fault clearing capability
- PMG: permanent magnet generator option for enhanced motor starting and fault clearing
- Cooling: integral set-mounted radiator system rated for specified ambient temperatures
- Enclosures: optional weather-protective and sound-attenuated enclosures
- Fuel tanks: optional dual-wall sub-base tanks
- Frequencies: 50 Hz and 60 Hz
- Certifications: EPA Tier 2, EU Stage II (configuration dependent)
- Fuel type: Diesel
- Regional availability: Africa & Middle East, Asia Pacific, Europe, India, Latin America, North America
Catalogs
Power Generation
24 Pages
Exhibitions
Meet this supplier at the following exhibition(s):
Other CUMMINS GENERATOR TECHNOLOGIES products
Prime power
Related Searches
- Cummins generator set
- Cummins diesel generator set
- Cummins industrial generator set
- Cummins three-phase generator set
- Cummins 50 Hz generator set
- Cummins stationary generator set
- Cummins soundproof generator set
- Cummins water-cooled generator set
- Cummins direct fuel injection generator set
- Cummins 60 Hz generator set
- Cummins air-cooled generator set
- Cummins single-phase generator set
- Open frame generator set
- Emergency power generator
- Power generator for telecom applications
- Mechanical fuel injection generator set
- Portable power generator
- Cummins generator set with cover
- Cummins gas generator set
- Mining generator set
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.